Continuity: Definition and Types of Discontinuities

Master continuity: learn the definition, types of discontinuities, and how to analyze function behavior through 5 detailed exercises with visual examples and step-by-step solutions.

Solution: Exercises 1 to 3
1 Continuity Test
Exercise 1
Determine if f(x) = x² - 3x + 2 is continuous at x = 2.
Definition:

Continuity at a Point: A function f(x) is continuous at x = a if: (1) f(a) exists, (2) lim(x→a) f(x) exists, and (3) lim(x→a) f(x) = f(a).

Continuity test method:
  1. Check if f(a) is defined
  2. Find lim(x→a) f(x)
  3. Verify that lim(x→a) f(x) = f(a)
  4. Conclusion: Function is continuous if all conditions are met
Function Value
f(2) = 0
Limit Value
lim(x→2) f(x) = 0
Equality
✓
Step 1: Check if f(2) exists

f(2) = 2² - 3(2) + 2 = 4 - 6 + 2 = 0. Yes, f(2) exists.

Step 2: Find lim(x→2) f(x)

Since f(x) = x² - 3x + 2 is a polynomial, it's continuous everywhere. So lim(x→2) f(x) = f(2) = 0.

Step 3: Verify equality

lim(x→2) f(x) = 0 and f(2) = 0, so lim(x→2) f(x) = f(2).

Step 4: Conclusion

Since all three conditions are satisfied, f(x) is continuous at x = 2.

f(x) = x² - 3x + 2 is continuous at x = 2
Final answer:

f(x) = x² - 3x + 2 is continuous at x = 2.

Applied rules:

• Polynomial Continuity: Polynomials are continuous everywhere

• Continuity Definition: All three conditions must be satisfied

• Direct Substitution: For continuous functions, lim(x→a) f(x) = f(a)

2 Removable Discontinuity
Exercise 2
Analyze the function g(x) = (x² - 4)/(x - 2) for continuity at x = 2.
Definition:

Removable Discontinuity: A point where a function is undefined but the limit exists. The discontinuity can be "removed" by redefining the function at that point.

Function at x=2
Undefined
Limit at x=2
lim(x→2) g(x) = 4
Type
Removable
Step 1: Check if g(2) exists

g(2) = (2² - 4)/(2 - 2) = 0/0, which is undefined. So g(2) does not exist.

Step 2: Find lim(x→2) g(x)

Factor: g(x) = (x² - 4)/(x - 2) = (x - 2)(x + 2)/(x - 2) = x + 2 (for x ≠ 2)
So lim(x→2) g(x) = lim(x→2) (x + 2) = 4.

Step 3: Analyze the discontinuity

Since g(2) is undefined but lim(x→2) g(x) = 4 exists, this is a removable discontinuity.

Step 4: Remove the discontinuity

We can define a new function h(x) = {x + 2 if x ≠ 2, 4 if x = 2}, which is continuous at x = 2.

g(x) has a removable discontinuity at x = 2
Final answer:

g(x) = (x² - 4)/(x - 2) has a removable discontinuity at x = 2.

Applied rules:

• Removable Discontinuity: Function undefined but limit exists

• Factoring: Cancel common factors to find limit

• Redefined Function: Can make function continuous by redefinition

3 Jump Discontinuity
Exercise 3
Analyze the piecewise function h(x) = {x + 1 if x < 1, 3 if x = 1, x² if x > 1} for continuity at x = 1.
Definition:

Jump Discontinuity: A point where both one-sided limits exist but are not equal. The function "jumps" from one value to another.

Left Limit
lim(x→1⁻) h(x) = 2
Right Limit
lim(x→1⁺) h(x) = 1
Function Value
h(1) = 3
Step 1: Find the left-hand limit

For x < 1, h(x) = x + 1. So lim(x→1⁻) h(x) = lim(x→1⁻) (x + 1) = 1 + 1 = 2.

Step 2: Find the right-hand limit

For x > 1, h(x) = x². So lim(x→1⁺) h(x) = lim(x→1⁺) x² = 1² = 1.

Step 3: Check the function value

By definition, h(1) = 3.

Step 4: Analyze continuity

Since lim(x→1⁻) h(x) = 2 ≠ 1 = lim(x→1⁺) h(x), the ordinary limit does not exist. This is a jump discontinuity.

Step 5: Classify the discontinuity

Both one-sided limits exist but are not equal, so this is a jump discontinuity at x = 1.

h(x) has a jump discontinuity at x = 1
Final answer:

h(x) has a jump discontinuity at x = 1.

Applied rules:

• Jump Discontinuity: Both one-sided limits exist but are unequal

• One-Sided Limits: Use appropriate function piece based on approach direction

• Limit Existence: Ordinary limit exists only if one-sided limits are equal

Continuity: Key Concepts and Types
f continuous at a ⟺ f(a) exists ∧ lim(x→a) f(x) exists ∧ lim(x→a) f(x) = f(a)
Continuity Definition
Condition 1
f(a) exists
Function defined
Condition 2
lim(x→a) f(x) exists
Limit exists
Condition 3
lim(x→a) f(x) = f(a)
Match condition
Key Definitions:

Continuity: A function is continuous at a point if small changes in input result in small changes in output.

Discontinuity: A point where a function fails to be continuous.

Removable Discontinuity: A point where the function is undefined but the limit exists.

Jump Discontinuity: A point where both one-sided limits exist but are not equal.

Infinite Discontinuity: A point where the function approaches infinity.

Continuity Analysis:
  1. Check function definition: Verify f(a) exists
  2. Calculate limit: Find lim(x→a) f(x)
  3. Compare values: Verify lim(x→a) f(x) = f(a)
  4. Classify discontinuity: If not continuous, determine type
Tip 1: Polynomials, rational functions (where denominator ≠ 0), and root functions are continuous on their domains.
Tip 2: For piecewise functions, always check continuity at the boundary points.
Tip 3: A function can be continuous from one side (left or right) even if not continuous overall.
Tip 4: Look for zeros in denominators, negative values under even roots, and domain restrictions.
Common errors: Forgetting to check all three conditions, confusing continuity with differentiability, misidentifying the type of discontinuity.
Key properties: Continuous functions preserve connectedness, intermediate value theorem applies, composition of continuous functions is continuous.
Essential Rules:

• Continuity Definition: f is continuous at a ⟺ f(a) exists ∧ lim(x→a) f(x) exists ∧ lim(x→a) f(x) = f(a)

• Removable Discontinuity: lim(x→a) f(x) exists but ≠ f(a) or f(a) undefined

• Jump Discontinuity: lim(x→a⁻) f(x) ≠ lim(x→a⁺) f(x) but both exist

• Infinite Discontinuity: lim(x→a) f(x) = ±∞

Types of Discontinuities
📊
Jump Discontinuity

• Both one-sided limits exist

• One-sided limits are different

• Function "jumps" between values

• Example: Piecewise functions

Removable Discontinuity

• Limit exists at the point

• Function undefined or different

• Can be "fixed" by redefinition

Example: (x²-1)/(x-1) at x=1

Infinite Discontinuity

• Function approaches infinity

• Vertical asymptote present

• Limit does not exist

• Example: 1/x at x=0

Continuity Test Steps
1
Check f(a)
2
Find limit
3
Compare
4
Classify
Visual Identification
Continuity = no breaks, jumps, holes, or vertical asymptotes in graph
Master Continuity!
Solution: Exercises 4 to 5
4 Infinite Discontinuity
Exercise 4
Analyze the function k(x) = 1/(x - 3) for continuity at x = 3.
Definition:

Infinite Discontinuity: A point where the function increases or decreases without bound as x approaches the point. The limit is infinite.

Function at x=3
Undefined
Left Limit
lim(x→3⁻) k(x) = -∞
Right Limit
lim(x→3⁺) k(x) = +∞
Step 1: Check if k(3) exists

k(3) = 1/(3 - 3) = 1/0, which is undefined. So k(3) does not exist.

Step 2: Find the left-hand limit

As x approaches 3 from the left (x < 3), x - 3 is negative and approaches 0. So 1/(x - 3) approaches -∞.
Therefore, lim(x→3⁻) k(x) = -∞.

Step 3: Find the right-hand limit

As x approaches 3 from the right (x > 3), x - 3 is positive and approaches 0. So 1/(x - 3) approaches +∞.
Therefore, lim(x→3⁺) k(x) = +∞.

Step 4: Analyze the discontinuity

Since both one-sided limits approach infinity (though in opposite directions), this is an infinite discontinuity.

Step 5: Identify the asymptote

The line x = 3 is a vertical asymptote for the function.

k(x) has an infinite discontinuity at x = 3
Final answer:

k(x) = 1/(x - 3) has an infinite discontinuity at x = 3.

Applied rules:

• Infinite Discontinuity: Function approaches infinity at the point

• Sign Analysis: Consider the sign of the denominator as x approaches the value

• Vertical Asymptote: Occurs where function approaches infinity

5 Mixed Discontinuities
Exercise 5
Analyze the function p(x) = {2x if x < 0, 1 if x = 0, x² + 1 if 0 < x ≤ 1, 3 if x > 1} for continuity at x = 0 and x = 1.
Definition:

Multiple Discontinuities: A function can have different types of discontinuities at different points.

At x=0
Jump: lim⁻=0, lim⁺=1, f(0)=1
At x=1
Jump: lim⁻=2, lim⁺=3, f(1)=2
Step 1: Analyze continuity at x = 0

Left limit: lim(x→0⁻) p(x) = lim(x→0⁻) 2x = 0
Right limit: lim(x→0⁺) p(x) = lim(x→0⁺) (x² + 1) = 1
Function value: p(0) = 1

Step 2: Determine type at x = 0

Since lim(x→0⁻) p(x) = 0 ≠ 1 = lim(x→0⁺) p(x), this is a jump discontinuity at x = 0.

Step 3: Analyze continuity at x = 1

Left limit: lim(x→1⁻) p(x) = lim(x→1⁻) (x² + 1) = 1² + 1 = 2
Right limit: lim(x→1⁺) p(x) = lim(x→1⁺) 3 = 3
Function value: p(1) = 1² + 1 = 2

Step 4: Determine type at x = 1

Since lim(x→1⁻) p(x) = 2 ≠ 3 = lim(x→1⁺) p(x), this is a jump discontinuity at x = 1.

Step 5: Conclusion

The function has jump discontinuities at both x = 0 and x = 1.

p(x) has jump discontinuities at x = 0 and x = 1
Final answer:

p(x) has jump discontinuities at x = 0 and x = 1.

Applied rules:

• Jump Discontinuity: Both one-sided limits exist but are unequal

• Multiple Points: Analyze each potential discontinuity separately

• Piecewise Functions: Use appropriate piece for each one-sided limit

Comprehensive Continuity Guide
f continuous at a ⟺ f(a) exists ∧ lim(x→a) f(x) exists ∧ lim(x→a) f(x) = f(a)
Fundamental Definition
Key definitions:

Continuity: A function f(x) is continuous at x = a if three conditions are met: (1) f(a) exists (function is defined), (2) lim(x→a) f(x) exists (limit exists), and (3) lim(x→a) f(x) = f(a) (limit equals function value).

Continuity on Interval: A function is continuous on an interval if it is continuous at every point in that interval.

Types of Discontinuities: The points where a function fails to be continuous, classified by the nature of the failure.

One-Sided Continuity: A function is continuous from the right at a if lim(x→a⁺) f(x) = f(a), and from the left if lim(x→a⁻) f(x) = f(a).

Complete continuity analysis:
  1. Identify potential points: Look for domain restrictions, piecewise boundaries, and singularities
  2. Check each condition: Verify f(a), lim(x→a) f(x), and their equality
  3. Classify discontinuity: Determine the type based on which condition fails
  4. Verify results: Check with graphical representation when possible
Tip 1: For rational functions, check where the denominator equals zero - these are potential discontinuities.
Tip 2: For piecewise functions, always check continuity at the boundary points between pieces.
Tip 3: If you find a removable discontinuity, you can often redefine the function to make it continuous.
Tip 4: Remember that continuity is a local property - a function can be continuous at some points and discontinuous at others.
Common errors: Confusing continuity with differentiability, forgetting to check all three conditions, misidentifying the type of discontinuity, not considering domain restrictions.
Key properties: Continuous functions preserve connectedness, satisfy the Intermediate Value Theorem, and their graphs can be drawn without lifting the pen.
Essential rules and properties:

• Continuity Definition: f is continuous at a ⟺ f(a) exists ∧ lim(x→a) f(x) exists ∧ lim(x→a) f(x) = f(a)

• Polynomial Continuity: All polynomials are continuous everywhere

• Rational Function Continuity: Continuous wherever denominator ≠ 0

• Operations: Sums, differences, products, and quotients (where denominator ≠ 0) of continuous functions are continuous

• Composition: Composition of continuous functions is continuous

Applications in Calculus and Real Life
Advanced Application: Real-World Modeling
Continuity is fundamental for calculus, physics, engineering, and economic modeling where smooth transitions are essential.

Analysis: Continuity connects to calculus, physics, engineering, and economic applications.

  • Calculus: Required for differentiation and integration
  • Physics: Modeling continuous physical processes
  • Engineering: Ensuring smooth system responses
  • Economics: Continuous demand and supply curves

Questions & Answers

Question: I'm confused about the three conditions for continuity. Do I need to check all of them?

Answer: Yes, you must check all three conditions for continuity at a point:

  1. f(a) exists: The function must be defined at the point
  2. lim(x→a) f(x) exists: The limit must exist (both one-sided limits must exist and be equal)
  3. lim(x→a) f(x) = f(a): The limit must equal the function value

All three conditions must be satisfied for the function to be continuous at that point. If any condition fails, the function is discontinuous at that point.

For example, if f(a) exists and the limit exists but they're not equal, you have a removable discontinuity. If the limit doesn't exist, you might have a jump or infinite discontinuity.

Question: What's the difference between a removable discontinuity and a jump discontinuity?

Answer: The key differences are:

Removable Discontinuity:

  • The limit exists at the point
  • The function is either undefined at the point or has a different value than the limit
  • The graph has a "hole" that can be filled to make the function continuous
  • Example: f(x) = (x²-1)/(x-1) at x = 1

Jump Discontinuity:

  • Both one-sided limits exist but are not equal
  • The function "jumps" from one value to another
  • The graph has a "break" or "step" where the function jumps between values
  • Example: Piecewise functions that don't match at the boundary

The fundamental difference is that for removable discontinuities, the limit exists, but for jump discontinuities, the limit does not exist (because the one-sided limits are different).

Question: Can a function be continuous at some points and discontinuous at others?

Answer: Absolutely! Continuity is a local property, meaning it's evaluated at individual points. A function can be continuous at some points and discontinuous at others.

Examples:

  • f(x) = 1/x: Continuous everywhere except at x = 0 (infinite discontinuity)
  • g(x) = {1 if x is rational, 0 if x is irrational}: Discontinuous at every point
  • h(x) = {x² if x ≤ 0, x if x > 0}: Continuous everywhere except potentially at x = 0

When we say a function is "continuous on an interval," we mean it's continuous at every point in that interval. Otherwise, we analyze continuity point by point.

This localized nature of continuity is why we can have functions that are mostly continuous but have isolated points of discontinuity.

Question: How do I know which piece of a piecewise function to use when checking continuity?

Answer: When checking continuity at a boundary point of a piecewise function, you need to consider the one-sided limits:

  1. For the left-hand limit: Use the piece of the function that applies to values less than the boundary point
  2. For the right-hand limit: Use the piece of the function that applies to values greater than the boundary point
  3. For the function value: Use the piece (or explicit value) that applies exactly at the boundary point

Example: If f(x) = {x+1 if x < 2, 5 if x = 2, x² if x > 2}, when checking continuity at x = 2:

  • lim(x→2⁻) f(x) uses x+1: lim(x→2⁻) (x+1) = 3
  • lim(x→2⁺) f(x) uses x²: lim(x→2⁺) x² = 4
  • f(2) = 5 (explicitly given)

Since the one-sided limits are different (3 ≠ 4), the function is discontinuous at x = 2 regardless of the function value.

Question: What happens when a function approaches infinity? Is that still a discontinuity?

Answer: Yes, when a function approaches infinity as x approaches a point, that point is an infinite discontinuity.

An infinite discontinuity occurs when:

  • lim(x→a) f(x) = +∞ or -∞
  • The function has a vertical asymptote at x = a
  • The function is undefined at x = a

Example: f(x) = 1/(x-3) has an infinite discontinuity at x = 3 because:

  • lim(x→3⁻) 1/(x-3) = -∞
  • lim(x→3⁺) 1/(x-3) = +∞
  • f(3) is undefined

The limit does not exist in the usual sense (it's infinite), so the function cannot be continuous at that point. This is fundamentally different from finite jumps or removable discontinuities.