Discontinuities: Types and Analysis (Removable, Jump, Infinite)

Master discontinuities: learn to identify and classify removable, jump, and infinite discontinuities through 5 detailed exercises with visual examples and step-by-step solutions.

Solution: Exercises 1 to 3
1 Removable Discontinuity
Exercise 1
Analyze the function f(x) = (x² - 4)/(x - 2) for discontinuities.
Definition:

Removable Discontinuity: A point where a function is undefined but the limit exists. The function has a "hole" that can be filled to make it continuous.

Discontinuity identification method:
  1. Find where the function is undefined
  2. Calculate the limit at that point
  3. Determine if the limit exists and is finite
  4. Classify the discontinuity based on the limit behavior
Function Undefined
x = 2
Limit
lim(x→2) f(x) = 4
Type
Removable
Step 1: Identify where f(x) is undefined

The function f(x) = (x² - 4)/(x - 2) is undefined when x - 2 = 0, so at x = 2.

Step 2: Factor the numerator

f(x) = (x² - 4)/(x - 2) = (x - 2)(x + 2)/(x - 2)

Step 3: Simplify (for x ≠ 2)

For x ≠ 2: f(x) = (x - 2)(x + 2)/(x - 2) = x + 2

Step 4: Find the limit

lim(x→2) f(x) = lim(x→2) (x + 2) = 2 + 2 = 4

Step 5: Classify the discontinuity

Since f(2) is undefined but lim(x→2) f(x) = 4 exists and is finite, this is a removable discontinuity.

f(x) has a removable discontinuity at x = 2
Final answer:

f(x) = (x² - 4)/(x - 2) has a removable discontinuity at x = 2.

Applied rules:

• Removable Discontinuity: Limit exists but function is undefined

• Factoring: Difference of squares pattern

• Common Factor Cancellation: Cancel (x - 2) for x ≠ 2

2 Jump Discontinuity
Exercise 2
Analyze the piecewise function g(x) = {x + 1 if x < 0, 2 if x = 0, x² if x > 0} for discontinuities at x = 0.
Definition:

Jump Discontinuity: A point where both one-sided limits exist but are not equal. The function "jumps" from one value to another.

Left Limit
lim(x→0⁻) g(x) = 1
Right Limit
lim(x→0⁺) g(x) = 0
Function Value
g(0) = 2
Step 1: Find the left-hand limit

For x < 0, g(x) = x + 1. So lim(x→0⁻) g(x) = lim(x→0⁻) (x + 1) = 0 + 1 = 1.

Step 2: Find the right-hand limit

For x > 0, g(x) = x². So lim(x→0⁺) g(x) = lim(x→0⁺) x² = 0² = 0.

Step 3: Check the function value

By definition, g(0) = 2.

Step 4: Analyze continuity

Since lim(x→0⁻) g(x) = 1 ≠ 0 = lim(x→0⁺) g(x), the ordinary limit does not exist.

Step 5: Classify the discontinuity

Both one-sided limits exist but are not equal, so this is a jump discontinuity at x = 0.

g(x) has a jump discontinuity at x = 0
Final answer:

g(x) has a jump discontinuity at x = 0.

Applied rules:

• Jump Discontinuity: Both one-sided limits exist but are unequal

• One-Sided Limits: Use appropriate piece based on approach direction

• Limit Existence: Ordinary limit exists only if one-sided limits are equal

3 Infinite Discontinuity
Exercise 3
Analyze the function h(x) = 1/(x + 3) for discontinuities.
Definition:

Infinite Discontinuity: A point where the function approaches positive or negative infinity as x approaches the point. The function has a vertical asymptote.

Function Undefined
x = -3
Left Limit
lim(x→-3⁻) h(x) = -∞
Right Limit
lim(x→-3⁺) h(x) = +∞
Step 1: Identify where h(x) is undefined

The function h(x) = 1/(x + 3) is undefined when x + 3 = 0, so at x = -3.

Step 2: Find the left-hand limit

As x approaches -3 from the left (x < -3), x + 3 is negative and approaches 0. So 1/(x + 3) approaches -∞.
Therefore, lim(x→-3⁻) h(x) = -∞.

Step 3: Find the right-hand limit

As x approaches -3 from the right (x > -3), x + 3 is positive and approaches 0. So 1/(x + 3) approaches +∞.
Therefore, lim(x→-3⁺) h(x) = +∞.

Step 4: Analyze the discontinuity

Since both one-sided limits approach infinity (though in opposite directions), this is an infinite discontinuity.

Step 5: Identify the vertical asymptote

The line x = -3 is a vertical asymptote for the function.

h(x) has an infinite discontinuity at x = -3
Final answer:

h(x) = 1/(x + 3) has an infinite discontinuity at x = -3.

Applied rules:

• Infinite Discontinuity: Function approaches infinity at the point

• Sign Analysis: Consider the sign of the denominator as x approaches the value

• Vertical Asymptote: Occurs where function approaches infinity

Discontinuities: Key Concepts and Types
Removable: lim(x→a) f(x) exists but ≠ f(a) | Jump: lim⁻ ≠ lim⁺ | Infinite: lim = ±∞
Discontinuity Types
Removable
lim exists ≠ f(a)
Hole in graph
Jump
lim⁻ ≠ lim⁺
Function "jumps"
Infinite
lim = ±∞
Vertical asymptote
Key Definitions:

Discontinuity: A point where a function fails to be continuous. This occurs when at least one of the three conditions for continuity is not satisfied.

Removable Discontinuity: A point where the limit exists but the function is undefined or has a different value than the limit.

Jump Discontinuity: A point where both one-sided limits exist but are not equal, causing the function to "jump" between values.

Infinite Discontinuity: A point where the function approaches positive or negative infinity, creating a vertical asymptote.

Discontinuity Classification:
  1. Locate potential points: Find where function is undefined or has domain restrictions
  2. Calculate one-sided limits: Find lim(x→a⁻) f(x) and lim(x→a⁺) f(x)
  3. Determine ordinary limit: Check if lim(x→a) f(x) exists
  4. Classify based on behavior: Use the limit information to identify the type
Tip 1: For rational functions, check where the denominator equals zero - these are potential discontinuities.
Tip 2: For piecewise functions, always check continuity at the boundary points between pieces.
Tip 3: If you find a removable discontinuity, you can redefine the function to make it continuous.
Tip 4: Remember that infinite discontinuities create vertical asymptotes in the graph.
Common errors: Confusing the types of discontinuities, forgetting to check both one-sided limits, not recognizing when a discontinuity is removable.
Key properties: All discontinuities violate at least one condition of continuity, removable discontinuities can be "fixed" by redefinition.
Essential Rules:

• Removable: lim(x→a) f(x) exists but ≠ f(a) (or f(a) is undefined)

• Jump: lim(x→a⁻) f(x) and lim(x→a⁺) f(x) both exist but lim(x→a⁻) f(x) ≠ lim(x→a⁺) f(x)

• Infinite: lim(x→a) f(x) = ±∞

• Continuity: f is continuous at a ⟺ f(a) exists ∧ lim(x→a) f(x) exists ∧ lim(x→a) f(x) = f(a)

Discontinuity Types
📊
Removable

• Limit exists at point

• Function undefined or different

• Graph has a "hole"

• Can be made continuous

Jump

• Both one-sided limits exist

• One-sided limits are unequal

• Function "jumps" between values

• Cannot be made continuous

Infinite

• Function approaches infinity

• Creates vertical asymptote

• Limit does not exist

• Graph breaks vertically

Classification Process
1
Find point
2
Calculate limits
3
Compare values
4
Classify
Visual Recognition
Removable = hole, Jump = gap, Infinite = vertical asymptote
Master Discontinuities!
Solution: Exercises 4 to 5
4 Multiple Discontinuities
Exercise 4
Analyze the function p(x) = {(x² - 1)/(x - 1) if x ≠ 1, 3 if x = 1, 2/x if x > 2} for all discontinuities.
Definition:

Multiple Discontinuities: A function can have different types of discontinuities at different points in its domain.

At x=1
Removable: lim=2, f(1)=3
At x=0
Infinite: lim=±∞
Step 1: Analyze x = 1

For x ≠ 1: (x² - 1)/(x - 1) = (x - 1)(x + 1)/(x - 1) = x + 1
So lim(x→1) (x² - 1)/(x - 1) = lim(x→1) (x + 1) = 2
But f(1) = 3 ≠ 2, so this is a removable discontinuity.

Step 2: Analyze x = 0

For x near 0: f(x) = (x² - 1)/(x - 1) = (x² - 1)/(x - 1)
As x → 0: f(x) → (0 - 1)/(0 - 1) = -1/(-1) = 1
Actually, let's reconsider the piecewise function. The function is (x² - 1)/(x - 1) for x ≠ 1, so f(0) = (0 - 1)/(0 - 1) = 1.
Wait, let me re-read: p(x) = {(x² - 1)/(x - 1) if x ≠ 1, 3 if x = 1, 2/x if x > 2}
The third piece (2/x if x > 2) overlaps with the first piece. Let me clarify: for x > 2, p(x) = 2/x
So at x = 2: p(2) = (4 - 1)/(2 - 1) = 3
lim(x→2⁺) p(x) = lim(x→2⁺) 2/x = 1
lim(x→2⁻) p(x) = lim(x→2⁻) (x² - 1)/(x - 1) = 3
Since 1 ≠ 3, there's a jump discontinuity at x = 2.

Step 3: Analyze x = 0

Actually, the function is defined at x = 0: p(0) = (0² - 1)/(0 - 1) = -1/(-1) = 1. So no discontinuity at x = 0.

Step 4: Re-analyze the function definition

Looking at the piecewise function again:
p(x) = { (x² - 1)/(x - 1) if x ≠ 1, 3 if x = 1, 2/x if x > 2 }
This seems to have overlapping conditions. Let me interpret it as:
p(x) = { (x² - 1)/(x - 1) if x ≠ 1 and x ≤ 2, 3 if x = 1, 2/x if x > 2 }
So at x = 1: f(1) = 3
lim(x→1) (x² - 1)/(x - 1) = 2 ≠ 3 → removable discontinuity at x = 1
At x = 2: lim(x→2⁻) p(x) = (4-1)/(2-1) = 3, lim(x→2⁺) p(x) = 2/2 = 1
Since 3 ≠ 1, there's a jump discontinuity at x = 2.

Step 5: Final classification

Removable discontinuity at x = 1, jump discontinuity at x = 2.

p(x) has a removable discontinuity at x = 1 and a jump discontinuity at x = 2
Final answer:

p(x) has a removable discontinuity at x = 1 and a jump discontinuity at x = 2.

Applied rules:

• Multiple Points: Analyze each potential discontinuity separately

• Piecewise Functions: Pay attention to domain restrictions

• Jump Discontinuity: Both one-sided limits exist but are unequal

5 Oscillating Discontinuity
Exercise 5
Analyze the function q(x) = sin(1/x) for discontinuities at x = 0.
Definition:

Oscillating Discontinuity: A point where the function oscillates infinitely as x approaches the point, and the limit does not exist.

Function at x=0
Undefined
Limit
Does not exist
Type
Essential
Step 1: Check if q(0) exists

q(0) = sin(1/0) = sin(∞), which is undefined. So q(0) does not exist.

Step 2: Analyze the limit behavior

As x → 0, 1/x → ±∞. The function sin(1/x) oscillates between -1 and 1 infinitely often as x approaches 0.

Step 3: Determine if the limit exists

Since sin(1/x) oscillates infinitely between -1 and 1 as x → 0, the limit does not exist.

Step 4: Classify the discontinuity

This is not a removable, jump, or infinite discontinuity. It's an essential discontinuity (sometimes called an oscillating discontinuity).

Step 5: Describe the behavior

As x gets closer to 0, the function oscillates more and more rapidly between -1 and 1.

q(x) has an essential discontinuity at x = 0
Final answer:

q(x) = sin(1/x) has an essential discontinuity at x = 0.

Applied rules:

• Essential Discontinuity: Limit does not exist due to infinite oscillation

• Oscillation: Function oscillates infinitely as x approaches the point

• Non-Standard Type: Does not fit the three main categories

Comprehensive Discontinuities Guide
Removable: lim exists ≠ f(a) | Jump: lim⁻ ≠ lim⁺ | Infinite: lim = ±∞ | Essential: lim DNE
All Discontinuity Types
Key definitions:

Discontinuity: A function f(x) is discontinuous at x = a if it fails to satisfy at least one of the three conditions for continuity: (1) f(a) exists, (2) lim(x→a) f(x) exists, (3) lim(x→a) f(x) = f(a).

Removable Discontinuity: A point where the limit exists but is not equal to the function value (or the function is undefined). Can be made continuous by redefining the function at that point.

Jump Discontinuity: A point where both one-sided limits exist but are not equal. The function "jumps" from one value to another.

Infinite Discontinuity: A point where the function approaches positive or negative infinity. Creates a vertical asymptote in the graph.

Essential/Oscillating Discontinuity: A point where the limit does not exist due to wild oscillation or other non-standard behavior.

Complete discontinuity analysis:
  1. Identify potential points: Look for domain restrictions, piecewise boundaries, zeros of denominators
  2. Calculate one-sided limits: Find lim(x→a⁻) f(x) and lim(x→a⁺) f(x)
  3. Determine ordinary limit: Check if lim(x→a) f(x) exists
  4. Compare with function value: Compare limit to f(a) if defined
  5. Classify the discontinuity: Based on the behavior observed
Tip 1: For rational functions, look for zeros in the denominator - these are potential discontinuities.
Tip 2: For piecewise functions, always check the boundary points where the function definition changes.
Tip 3: Remember that removable discontinuities can be "fixed" by redefining the function value.
Tip 4: Infinite discontinuities create vertical asymptotes in the graph of the function.
Common errors: Confusing the types of discontinuities, forgetting to check both one-sided limits, not recognizing removable discontinuities when the function is given in factored form.
Key properties: Continuity is a local property, removable discontinuities are "mild" compared to other types, infinite discontinuities involve vertical asymptotes.
Essential rules and classifications:

• Removable: lim(x→a) f(x) exists but ≠ f(a) or f(a) undefined

• Jump: lim(x→a⁻) f(x) and lim(x→a⁺) f(x) both exist but ≠ each other

• Infinite: lim(x→a) f(x) = ±∞

• Essential: lim(x→a) f(x) does not exist due to oscillation or other behavior

• Continuity: f is continuous at a ⟺ all three conditions of continuity are satisfied

Applications in Real Life and Calculus
Advanced Application: Engineering Systems
Discontinuities model real-world phenomena like switch-on events, phase transitions, and system failures in engineering and physics.

Analysis: Discontinuities connect to calculus, physics, engineering, and real-world applications.

  • Physics: Phase transitions and sudden state changes
  • Engineering: Switching circuits and mechanical impacts
  • Economics: Market crashes and policy changes
  • Medicine: Drug concentration thresholds

Questions & Answers

Question: How can I tell the difference between a removable discontinuity and a vertical asymptote?

Answer: The key difference lies in the behavior of the limit:

Removable Discontinuity:

  • The limit exists and is finite
  • The function is undefined at the point or has a different value
  • Graphically appears as a "hole" in the curve
  • Example: f(x) = (x²-1)/(x-1) at x=1

Vertical Asymptote (Infinite Discontinuity):

  • The limit approaches infinity (positive or negative)
  • The function grows without bound near the point
  • Graphically appears as a vertical line that the curve approaches
  • Example: f(x) = 1/(x-2) at x=2

To distinguish them, calculate the limit. If it's a finite number, it's removable. If it's infinite, it's a vertical asymptote.

Question: Can a function have more than one type of discontinuity at the same point?

Answer: No, a function can have only one type of discontinuity at any given point. The classification is mutually exclusive:

  • If the limit exists (finite), it's a removable discontinuity
  • If both one-sided limits exist but are unequal, it's a jump discontinuity
  • If the function approaches infinity, it's an infinite discontinuity
  • If the limit doesn't exist due to oscillation or other behavior, it's an essential discontinuity

However, a function can have different types of discontinuities at different points. For example, f(x) = (x²-4)/(x-2) for x ≠ 2 and f(x) = 1/x for x > 3 could have a removable discontinuity at x = 2 and an infinite discontinuity at x = 3.

The classification depends on the specific behavior at each point.

Question: What exactly makes a discontinuity "jump"? Why isn't it just a big gap?

Answer: A jump discontinuity is characterized by a specific mathematical condition: both one-sided limits exist and are finite, but they are not equal.

What makes it a "jump" is that:

  • The function approaches one finite value from the left
  • The function approaches a different finite value from the right
  • The function "jumps" from one value to another without taking intermediate values

It's not just a "big gap" because:

  • The function is well-behaved on both sides of the point
  • The gap is between two specific finite values
  • The size of the "jump" is the difference between the one-sided limits

Example: f(x) = 0 for x < 0 and f(x) = 1 for x ≥ 0 has a jump of size 1 at x = 0. The function jumps from 0 to 1.

Question: When I find a removable discontinuity, how do I "fix" it by redefining the function?

Answer: To fix a removable discontinuity at x = a:

  1. Calculate L = lim(x→a) f(x)
  2. Redefine the function as: g(x) = {f(x) if x ≠ a, L if x = a}
  3. The new function g(x) is continuous at x = a

Example: f(x) = (x² - 4)/(x - 2)

  • f(x) is undefined at x = 2
  • lim(x→2) (x² - 4)/(x - 2) = lim(x→2) (x + 2) = 4
  • Define g(x) = {x + 2 if x ≠ 2, 4 if x = 2}
  • Then g(x) is continuous at x = 2

The "fix" fills in the hole with the value that the function approaches.

Question: Can a function have both a vertical asymptote and a hole in the same graph?

Answer: Yes, absolutely! A function can have multiple types of discontinuities at different points in its domain.

Example: f(x) = (x² - 1)(x - 3)/[(x - 1)(x - 2)]

  • At x = 1: (x² - 1)/(x - 1) = (x - 1)(x + 1)/(x - 1) = x + 1 for x ≠ 1, so lim(x→1) f(x) = 2, but f(1) is undefined → removable discontinuity (hole)
  • At x = 2: denominator is 0 but numerator is not → vertical asymptote

More generally, rational functions often have:

  • Zeros of the numerator that are also zeros of the denominator → removable discontinuities
  • Zeros of the denominator that are not zeros of the numerator → vertical asymptotes

So yes, one graph can contain both holes and vertical asymptotes.