Solved Exercises on Introduction to Limits: Intuition and Notation in Precalculus

Master limits intuition and notation: understanding behavior near points, left/right limits, and function behavior through these 5 detailed exercises.

Solution: Exercises 1 to 3
1 Basic limit evaluation
Exercise 1
Evaluate: \(\lim_{x \to 2} (3x + 1)\)
Definition:

Limit: The value that a function approaches as the input approaches some value. The notation \(\lim_{x \to a} f(x) = L\) means "the limit of f(x) as x approaches a equals L".

Direct substitution method:

For polynomial and rational functions continuous at x = a, we can evaluate the limit by direct substitution: \(\lim_{x \to a} f(x) = f(a)\)

  1. Check if the function is continuous at the point of interest
  2. If continuous, substitute the value directly
  3. Verify the result makes sense
Function
\(f(x) = 3x + 1\)
Point
\(x \to 2\)
Result
\(L = 7\)
Step 1: Analyze the function

The function \(f(x) = 3x + 1\) is a linear polynomial, which is continuous everywhere.

Step 2: Apply direct substitution

Since the function is continuous at \(x = 2\), we can substitute directly:

\(\lim_{x \to 2} (3x + 1) = 3(2) + 1 = 6 + 1 = 7\)

Step 3: Verify the result

As x approaches 2 from both sides, f(x) approaches 7.

\(\lim_{x \to 2} (3x + 1) = 7\)
Final answer:

\(\lim_{x \to 2} (3x + 1) = 7\)

Applied rules:

• Direct substitution: For continuous functions, \(\lim_{x \to a} f(x) = f(a)\)

• Polynomial continuity: Polynomial functions are continuous everywhere

• Arithmetic: Substituting and evaluating the expression

Key Note: Direct substitution works for polynomials, rational functions (where denominator ≠ 0), and continuous functions.
2 Limit with removable discontinuity
Exercise 2
Evaluate: \(\lim_{x \to 3} \frac{x^2 - 9}{x - 3}\)
Definition:

Removable discontinuity: A point where a function is undefined but the limit exists. The function can be made continuous by defining or redefining the function value at that point.

Original
\(\frac{x^2 - 9}{x - 3}\)
Factored
\(\frac{(x-3)(x+3)}{x-3}\)
Simplified
\(x + 3\)
Step 1: Identify the issue

Direct substitution gives \(\frac{3^2 - 9}{3 - 3} = \frac{0}{0}\), which is indeterminate.

Step 2: Factor the numerator

\(x^2 - 9 = (x-3)(x+3)\) (difference of squares)

Step 3: Simplify the expression

\(\frac{x^2 - 9}{x - 3} = \frac{(x-3)(x+3)}{x-3} = x + 3\) for \(x \neq 3\)

Step 4: Evaluate the limit

\(\lim_{x \to 3} \frac{x^2 - 9}{x - 3} = \lim_{x \to 3} (x + 3) = 3 + 3 = 6\)

\(\lim_{x \to 3} \frac{x^2 - 9}{x - 3} = 6\)
Final answer:

\(\lim_{x \to 3} \frac{x^2 - 9}{x - 3} = 6\)

Applied rules:

• Factoring: Difference of squares \(a^2 - b^2 = (a-b)(a+b)\)

• Simplification: Cancel common factors (when \(x \neq 3\))

• Limit preservation: If \(f(x) = g(x)\) for all \(x \neq a\), then \(\lim_{x \to a} f(x) = \lim_{x \to a} g(x)\)

Key Note: Even though the function is undefined at x = 3, the limit still exists and equals 6.
3 One-sided limits
Exercise 3
For \(f(x) = \begin{cases} x + 1 & \text{if } x < 2 \\ 3 & \text{if } x = 2 \\ x - 1 & \text{if } x > 2 \end{cases}\), find \(\lim_{x \to 2^-} f(x)\) and \(\lim_{x \to 2^+} f(x)\)
Definition:

One-sided limits: \(\lim_{x \to a^-} f(x)\) is the limit as x approaches a from the left, and \(\lim_{x \to a^+} f(x)\) is the limit as x approaches a from the right.

Left limit
\(\lim_{x \to 2^-} f(x) = 3\)
Right limit
\(\lim_{x \to 2^+} f(x) = 1\)
Step 1: Understand the piecewise function

For \(x < 2\): \(f(x) = x + 1\)

For \(x = 2\): \(f(x) = 3\)

For \(x > 2\): \(f(x) = x - 1\)

Step 2: Evaluate left-hand limit

As x approaches 2 from the left (\(x \to 2^-\)), we use \(f(x) = x + 1\)

\(\lim_{x \to 2^-} f(x) = \lim_{x \to 2^-} (x + 1) = 2 + 1 = 3\)

Step 3: Evaluate right-hand limit

As x approaches 2 from the right (\(x \to 2^+\)), we use \(f(x) = x - 1\)

\(\lim_{x \to 2^+} f(x) = \lim_{x \to 2^+} (x - 1) = 2 - 1 = 1\)

Step 4: Analyze the results

Since \(\lim_{x \to 2^-} f(x) = 3 \neq 1 = \lim_{x \to 2^+} f(x)\), the overall limit \(\lim_{x \to 2} f(x)\) does not exist.

\(\lim_{x \to 2^-} f(x) = 3\), \(\lim_{x \to 2^+} f(x) = 1\)
Final answer:

\(\lim_{x \to 2^-} f(x) = 3\) and \(\lim_{x \to 2^+} f(x) = 1\)

Applied rules:

• Left-hand limit: Use the function definition for \(x < a\)

• Right-hand limit: Use the function definition for \(x > a\)

• Existence condition: \(\lim_{x \to a} f(x)\) exists if and only if both one-sided limits exist and are equal

Key Note: The actual function value at x = 2 doesn't affect the limit calculation.
Limits - Key Concepts and Notation
\(\lim_{x \to a} f(x) = L\)
Limit Notation
Left Limit
\(\lim_{x \to a^-} f(x)\)
x approaches a from the left
Right Limit
\(\lim_{x \to a^+} f(x)\)
x approaches a from the right
Limit Exists
\(\lim_{x \to a} f(x) = L\)
iff \(\lim_{x \to a^-} f(x) = \lim_{x \to a^+} f(x) = L\)
Key Definitions:

Limit: The value that a function approaches as the input approaches a particular value. It describes the behavior of a function near a point, not necessarily at that point.

Intuitive Understanding: If we can make f(x) arbitrarily close to L by taking x sufficiently close to (but not equal to) a, then \(\lim_{x \to a} f(x) = L\).

One-Sided Limits: Limits approached from only one direction: left (\(x \to a^-\)) or right (\(x \to a^+\)).

Problem-Solving Methodology:
  1. Analyze the function: Identify the type of function and potential issues (division by zero, square roots of negatives, etc.)
  2. Determine the approach: Direct substitution, factoring, rationalizing, or analyzing piecewise functions
  3. Apply appropriate technique: Use algebraic manipulation or limit properties
  4. Check one-sided limits: For piecewise functions or points of discontinuity
  5. Verify existence: Ensure left and right limits agree for overall limit to exist
Tip 1: The limit is about the journey, not the destination - what happens near the point matters, not the function value at the point.
Tip 2: Always check if direct substitution works first - it's the easiest method.
Tip 3: If direct substitution gives 0/0, try factoring, rationalizing, or other algebraic techniques.
Tip 4: For piecewise functions, consider the different pieces separately when evaluating one-sided limits.
Continuity connection: A function is continuous at x = a if \(\lim_{x \to a} f(x) = f(a)\).
Common error: Confusing function value with limit value - they can be different!
Visualization: Think of a point moving along the graph toward the target x-value.
Essential Properties:

• Direct substitution: If f is continuous at a, then \(\lim_{x \to a} f(x) = f(a)\)

• Limit existence: \(\lim_{x \to a} f(x) = L\) iff \(\lim_{x \to a^-} f(x) = \lim_{x \to a^+} f(x) = L\)

• Indeterminate forms: Forms like 0/0, ∞/∞ require algebraic manipulation

• Algebraic manipulation: Factoring, rationalizing, simplifying can resolve indeterminate forms

Solution: Exercises 4 to 5
4 Limit at infinity
Exercise 4
Evaluate: \(\lim_{x \to \infty} \frac{2x^2 + 3x - 1}{x^2 + 5}\)
Definition:

Limit at infinity: Describes the behavior of a function as x becomes very large (positive or negative). \(\lim_{x \to \infty} f(x) = L\) means f(x) approaches L as x increases without bound.

Original
\(\frac{2x^2 + 3x - 1}{x^2 + 5}\)
Divide by highest power
\(\frac{2 + \frac{3}{x} - \frac{1}{x^2}}{1 + \frac{5}{x^2}}\)
Result
2
Step 1: Identify the highest power of x

Both numerator and denominator have highest power \(x^2\)

Step 2: Divide numerator and denominator by \(x^2\)

\(\frac{2x^2 + 3x - 1}{x^2 + 5} = \frac{\frac{2x^2}{x^2} + \frac{3x}{x^2} - \frac{1}{x^2}}{\frac{x^2}{x^2} + \frac{5}{x^2}} = \frac{2 + \frac{3}{x} - \frac{1}{x^2}}{1 + \frac{5}{x^2}}\)

Step 3: Evaluate the limit of each term

As \(x \to \infty\): \(\frac{3}{x} \to 0\), \(\frac{1}{x^2} \to 0\), \(\frac{5}{x^2} \to 0\)

Step 4: Apply limit properties

\(\lim_{x \to \infty} \frac{2 + \frac{3}{x} - \frac{1}{x^2}}{1 + \frac{5}{x^2}} = \frac{2 + 0 - 0}{1 + 0} = \frac{2}{1} = 2\)

\(\lim_{x \to \infty} \frac{2x^2 + 3x - 1}{x^2 + 5} = 2\)
Final answer:

\(\lim_{x \to \infty} \frac{2x^2 + 3x - 1}{x^2 + 5} = 2\)

Applied rules:

• Leading coefficient rule: For rational functions, compare leading coefficients of numerator and denominator

• Limit of quotients: \(\lim \frac{f(x)}{g(x)} = \frac{\lim f(x)}{\lim g(x)}\) when limits exist and denominator ≠ 0

• Terms going to zero: \(\lim_{x \to \infty} \frac{1}{x^n} = 0\) for n > 0

5 Non-existent limit
Exercise 5
Evaluate: \(\lim_{x \to 0} \frac{|x|}{x}\)
Definition:

Non-existent limit: Occurs when the left-hand limit and right-hand limit are not equal, or when the function oscillates without approaching a specific value.

Left limit
\(\lim_{x \to 0^-} \frac{|x|}{x} = -1\)
Right limit
\(\lim_{x \to 0^+} \frac{|x|}{x} = 1\)
Overall
Does not exist
Step 1: Analyze the absolute value function

\(|x| = \begin{cases} -x & \text{if } x < 0 \\ x & \text{if } x \geq 0 \end{cases}\)

Step 2: Evaluate left-hand limit

As \(x \to 0^-\), we have \(x < 0\), so \(|x| = -x\)

\(\lim_{x \to 0^-} \frac{|x|}{x} = \lim_{x \to 0^-} \frac{-x}{x} = \lim_{x \to 0^-} (-1) = -1\)

Step 3: Evaluate right-hand limit

As \(x \to 0^+\), we have \(x > 0\), so \(|x| = x\)

\(\lim_{x \to 0^+} \frac{|x|}{x} = \lim_{x \to 0^+} \frac{x}{x} = \lim_{x \to 0^+} (1) = 1\)

Step 4: Compare the one-sided limits

Since \(\lim_{x \to 0^-} \frac{|x|}{x} = -1 \neq 1 = \lim_{x \to 0^+} \frac{|x|}{x}\), the overall limit does not exist.

\(\lim_{x \to 0} \frac{|x|}{x}\) does not exist
Final answer:

\(\lim_{x \to 0} \frac{|x|}{x}\) does not exist

Applied rules:

• Definition of absolute value: Split into cases based on sign

• One-sided limits: Evaluate separately for left and right approaches

• Limit existence: Both one-sided limits must exist and be equal

Complete Limits Reference Guide
\(\lim_{x \to a} f(x) = L\)
Limit Definition
Key definitions:

Limit: The value that f(x) approaches as x approaches a, denoted \(\lim_{x \to a} f(x) = L\). The function may not be defined at x = a, but the limit describes the behavior near that point.

Intuitive interpretation: We can make f(x) as close to L as we want by making x sufficiently close to (but not equal to) a.

One-sided limits: Left-hand limit \(\lim_{x \to a^-} f(x)\) and right-hand limit \(\lim_{x \to a^+} f(x)\) describe approach from specific directions.

Complete methodology:
  1. Direct substitution: Try substituting x = a if function is continuous at a
  2. Check for indeterminate forms: If result is 0/0, ∞/∞, ∞ - ∞, etc., use algebraic techniques
  3. Algebraic manipulation: Factor, rationalize, simplify, or use conjugates
  4. Analyze piecewise functions: Consider different pieces for one-sided limits
  5. Check for existence: Verify left and right limits agree
  6. Consider special cases: Absolute values, trigonometric functions, limits at infinity
Tip 1: The limit is independent of the function value at the point - focus on behavior near the point.
Tip 2: For rational functions, factor numerator and denominator to identify removable discontinuities.
Tip 3: When dealing with absolute values, split into cases based on the sign of the expression inside.
Tip 4: For limits at infinity of rational functions, compare degrees of numerator and denominator.
Tip 5: Always check both one-sided limits when the function behaves differently on either side of the point.
Common errors: Forgetting to check one-sided limits, confusing function value with limit value, not recognizing indeterminate forms.
Continuity connection: A function f is continuous at x = a if and only if \(\lim_{x \to a} f(x) = f(a)\).
Real-world applications: Instantaneous rates of change, tangent line slopes, optimization problems.
Essential rules and properties:

• Direct substitution: If f is continuous at a, then \(\lim_{x \to a} f(x) = f(a)\)

• Limit existence: \(\lim_{x \to a} f(x) = L\) exists if and only if \(\lim_{x \to a^-} f(x) = \lim_{x \to a^+} f(x) = L\)

• Algebraic properties: Limits preserve addition, subtraction, multiplication, division (when denominator ≠ 0)

• Indeterminate forms: 0/0, ∞/∞, ∞ - ∞, 0·∞, 1^∞, 0^0, ∞^0 require special techniques

• Comparison for rational functions: At infinity, compare leading terms and coefficients

Visual Analysis: Function Behavior Near Points
Exercise 6: Comparing Function Behaviors
Compare the behavior of functions near critical points:
\(f(x) = \frac{x^2-1}{x-1}\) (removable discontinuity)
\(g(x) = \frac{1}{x-2}\) (vertical asymptote)
\(h(x) = |x|\) (sharp corner at origin)

Analysis: The chart demonstrates different types of function behavior near critical points.

  • \(f(x) = \frac{x^2-1}{x-1}\): Approaches 2 as x approaches 1 (removable discontinuity)
  • \(g(x) = \frac{1}{x-2}\): Approaches ±∞ as x approaches 2 (vertical asymptote)
  • \(h(x) = |x|\): Approaches 0 from both sides as x approaches 0 (continuous at 0)

Questions & Answers

Question: I'm confused about the difference between the function value at a point and the limit at that point. Can you clarify?

Answer: This is a crucial distinction in calculus:

Function value f(a): The actual value of the function when x = a. This requires the function to be defined at x = a.

Limit \(\lim_{x \to a} f(x)\): What the function values approach as x gets arbitrarily close to a, but not necessarily at a. The function doesn't need to be defined at x = a for the limit to exist.

Example: Consider \(f(x) = \frac{x^2-1}{x-1}\). At x = 1, f(1) is undefined (division by zero), but \(\lim_{x \to 1} \frac{x^2-1}{x-1} = 2\) because as x approaches 1, the function values approach 2.

A function is continuous at x = a if and only if \(\lim_{x \to a} f(x) = f(a)\). This means the function value equals the limit at that point.

Question: When I get 0/0 after direct substitution, how do I know which algebraic technique to use?

Answer: The 0/0 form indicates an indeterminate expression that needs algebraic manipulation. Here's a systematic approach:

For polynomials: Factor both numerator and denominator, then cancel common factors. This often reveals removable discontinuities.

For expressions with radicals: Rationalize by multiplying numerator and denominator by the conjugate.

For rational expressions: Find a common denominator or simplify complex fractions.

General strategy:

  1. Try factoring first - it's the most common technique
  2. Look for special factoring patterns (difference of squares, sum/difference of cubes)
  3. Consider rationalizing if radicals are involved
  4. Try algebraic simplification techniques

Example: For \(\frac{x^2-4}{x-2}\), factoring gives \(\frac{(x-2)(x+2)}{x-2} = x+2\), revealing that the limit is 4 as x approaches 2.

Question: How do I handle limits involving absolute value functions? They seem tricky.

Answer: Absolute value functions require splitting into cases based on the sign of the expression inside the absolute value:

Step 1: Identify where the expression inside the absolute value equals zero.

Step 2: Determine the sign of the expression on either side of that point.

Step 3: Rewrite the absolute value function without absolute value bars using piecewise notation.

Step 4: Evaluate one-sided limits separately using the appropriate piece of the function.

Example: For \(\lim_{x \to 0} \frac{|x|}{x}\):

  • When x > 0: |x| = x, so \(\frac{|x|}{x} = \frac{x}{x} = 1\)
  • When x < 0: |x| = -x, so \(\frac{|x|}{x} = \frac{-x}{x} = -1\)
  • Therefore: \(\lim_{x \to 0^+} \frac{|x|}{x} = 1\) and \(\lim_{x \to 0^-} \frac{|x|}{x} = -1\)
  • Since the one-sided limits are different, the overall limit does not exist.

Question: What's the intuition behind one-sided limits? Why do we need them?

Answer: One-sided limits capture the behavior of functions that approach different values depending on the direction of approach:

Left-hand limit (\(\lim_{x \to a^-} f(x)\)): The value approached as x approaches a from values less than a (from the left).

Right-hand limit (\(\lim_{x \to a^+} f(x)\)): The value approached as x approaches a from values greater than a (from the right).

Why they're important:

  • Some functions behave differently on either side of a point (piecewise functions)
  • They help identify jump discontinuities
  • They're essential for defining continuity
  • They're necessary for understanding derivatives from the left or right

The overall limit \(\lim_{x \to a} f(x)\) exists if and only if both one-sided limits exist and are equal. If they differ, the limit does not exist, indicating a jump discontinuity.

Question: How do I approach limits at infinity? What's the general strategy?

Answer: Limits at infinity describe the end behavior of functions. Here's the systematic approach for rational functions:

Strategy for \(\lim_{x \to \infty} \frac{P(x)}{Q(x)}\):

  1. Identify the highest power of x in the denominator
  2. Divide both numerator and denominator by this highest power
  3. Simplify the expression
  4. Evaluate the limit, noting that terms with x in the denominator approach 0

General rules for rational functions:

  • If degree of numerator < degree of denominator: limit is 0
  • If degree of numerator = degree of denominator: limit is ratio of leading coefficients
  • If degree of numerator > degree of denominator: limit is ±∞ (depends on signs of leading coefficients)

Example: For \(\lim_{x \to \infty} \frac{3x^2 + 2x - 1}{2x^2 + 5}\), dividing by \(x^2\) gives \(\frac{3 + \frac{2}{x} - \frac{1}{x^2}}{2 + \frac{5}{x^2}}\), which approaches \(\frac{3}{2}\) as x approaches infinity.