Determinants of 2x2 and 3x3 Matrices

Master matrix determinants: calculation methods, properties, geometric interpretations, and applications through these 5 detailed exercises.

Determinant Concepts & Properties
\(\det\begin{pmatrix} a & b \\ c & d \end{pmatrix} = ad - bc\)
2×2 Determinant
\(\det\begin{pmatrix} a & b & c \\ d & e & f \\ g & h & i \end{pmatrix} = a(ei-fh) - b(di-fg) + c(dh-eg)\)
3×3 Determinant (Rule of Sarrus)
Key Definitions:

Determinant: A scalar value computed from the elements of a square matrix that provides important information about the matrix

Singular Matrix: A matrix whose determinant is zero (not invertible)

Nonsingular Matrix: A matrix whose determinant is non-zero (invertible)

Cofactor: The signed minor of an element in a matrix

Minor: The determinant of a submatrix formed by deleting one row and one column

Calculation Methods:
  1. 2×2 Matrix: Cross-multiplication method: \(ad - bc\)
  2. 3×3 Matrix: Sarrus rule or cofactor expansion along any row/column
  3. Cofactor Expansion: Sum of products of elements and their cofactors
Geometric Interpretation: The absolute value of the determinant represents the scaling factor of area/volume under the linear transformation.
Linear Independence: Non-zero determinant indicates that matrix columns are linearly independent vectors.
Tip 1: For 2×2 matrices, remember "product of main diagonal minus product of anti-diagonal".
Tip 2: For 3×3 matrices, use Sarrus rule: positive diagonals minus negative diagonals.
Tip 3: Always check that the matrix is square before attempting to calculate determinant.
Solution: Exercises 1 to 3
1 Basic 2×2 Determinant
Exercise 1
Calculate the determinant of:
\(A = \begin{pmatrix} 3 & 5 \\ 2 & 7 \end{pmatrix}\)
Formula Application:

For 2×2 matrix \(\begin{pmatrix} a & b \\ c & d \end{pmatrix}\), \(\det = ad - bc\)

Identify Elements
\(a=3, b=5, c=2, d=7\)
Apply Formula
\(ad - bc\)
Step 1: Identify matrix elements

\(a = 3\) (top-left), \(b = 5\) (top-right), \(c = 2\) (bottom-left), \(d = 7\) (bottom-right)

Step 2: Apply the 2×2 determinant formula

\(\det(A) = ad - bc = (3)(7) - (5)(2) = 21 - 10 = 11\)

Step 3: Verify calculation

Main diagonal product: \(3 \times 7 = 21\), Anti-diagonal product: \(5 \times 2 = 10\), Difference: \(21 - 10 = 11\)

\(\det(A) = 11\)
Final Answer:

\(\det(A) = 11\)

Key Properties:

• Since \(\det(A) \neq 0\), matrix \(A\) is invertible

• The absolute value represents the area scaling factor

• Sign indicates orientation preservation/reversal

2 3×3 Determinant (Sarrus Rule)
Exercise 2
Calculate the determinant of:
\(B = \begin{pmatrix} 1 & 2 & 3 \\ 4 & 5 & 6 \\ 7 & 8 & 9 \end{pmatrix}\)
Sarrus Rule:

Add products of positive diagonals and subtract products of negative diagonals

Step 1: Identify all positive diagonal products

Positive diagonals: \(1 \times 5 \times 9 = 45\), \(2 \times 6 \times 7 = 84\), \(3 \times 4 \times 8 = 96\)

Step 2: Identify all negative diagonal products

Negative diagonals: \(3 \times 5 \times 7 = 105\), \(1 \times 6 \times 8 = 48\), \(2 \times 4 \times 9 = 72\)

Step 3: Apply Sarrus rule

\(\det(B) = (45 + 84 + 96) - (105 + 48 + 72) = 225 - 225 = 0\)

Step 4: Alternative method (cofactor expansion)

Expanding along first row: \(\det(B) = 1\begin{vmatrix} 5 & 6 \\ 8 & 9 \end{vmatrix} - 2\begin{vmatrix} 4 & 6 \\ 7 & 9 \end{vmatrix} + 3\begin{vmatrix} 4 & 5 \\ 7 & 8 \end{vmatrix}\)

\(= 1(45-48) - 2(36-42) + 3(32-35) = 1(-3) - 2(-6) + 3(-3) = -3 + 12 - 9 = 0\)

\(\det(B) = 0\)
Final Answer:

\(\det(B) = 0\)

Important Implications:

• Since \(\det(B) = 0\), matrix \(B\) is singular (not invertible)

• The rows/columns are linearly dependent

• The volume scaling factor is zero (degenerate parallelepiped)

3 3×3 Determinant (Cofactor Expansion)
Exercise 3
Calculate the determinant of:
\(C = \begin{pmatrix} 2 & -1 & 0 \\ 1 & 3 & 4 \\ -2 & 0 & 5 \end{pmatrix}\)
Cofactor Expansion:

Expanding along row/column with most zeros simplifies calculation

Step 1: Choose row/column for expansion

First row has one zero element, making it a good choice: expand along row 1

Step 2: Apply cofactor expansion formula

\(\det(C) = a_{11}C_{11} + a_{12}C_{12} + a_{13}C_{13}\)

Where \(C_{ij} = (-1)^{i+j}M_{ij}\) and \(M_{ij}\) is the minor

Step 3: Calculate each cofactor

\(C_{11} = (-1)^{1+1}\begin{vmatrix} 3 & 4 \\ 0 & 5 \end{vmatrix} = 1(15 - 0) = 15\)

\(C_{12} = (-1)^{1+2}\begin{vmatrix} 1 & 4 \\ -2 & 5 \end{vmatrix} = -1(5 - (-8)) = -13\)

\(C_{13} = (-1)^{1+3}\begin{vmatrix} 1 & 3 \\ -2 & 0 \end{vmatrix} = 1(0 - (-6)) = 6\)

Step 4: Compute final determinant

\(\det(C) = 2(15) + (-1)(-13) + 0(6) = 30 + 13 + 0 = 43\)

\(\det(C) = 43\)
Final Answer:

\(\det(C) = 43\)

Strategic Tips:

• Always expand along the row/column with the most zeros

• The sign pattern alternates: + - + for 3×3 matrix

• Each minor is a 2×2 determinant calculation

Solution: Exercises 4 to 5
4 Parameterized Determinant
Exercise 4
For what values of parameter \(k\) does the determinant of
\(D = \begin{pmatrix} k & 2 \\ 3 & k \end{pmatrix}\) equal zero?
Problem Setup:

We need to solve: \(\det(D) = 0\)

Step 1: Calculate the determinant in terms of \(k\)

\(\det(D) = k \cdot k - 2 \cdot 3 = k^2 - 6\)

Step 2: Set determinant equal to zero

\(k^2 - 6 = 0\)

Step 3: Solve for \(k\)

\(k^2 = 6\)

\(k = \pm\sqrt{6}\)

Step 4: Verify solutions

When \(k = \sqrt{6}\): \(\det(D) = (\sqrt{6})^2 - 6 = 6 - 6 = 0\) ✓

When \(k = -\sqrt{6}\): \(\det(D) = (-\sqrt{6})^2 - 6 = 6 - 6 = 0\) ✓

\(k = \sqrt{6}\) or \(k = -\sqrt{6}\)
Final Answer:

The determinant equals zero when \(k = \sqrt{6}\) or \(k = -\sqrt{6}\)

Parameter Analysis:

• When \(\det(D) = 0\), matrix \(D\) is singular

• These critical values indicate where the matrix loses invertibility

• The quadratic nature of the determinant creates two critical points

5 Geometric Application
Exercise 5
Find the area of the triangle with vertices at (1, 2), (4, 6), and (7, 3) using the determinant method.
Triangle Area Formula:

Area = \(\frac{1}{2}|\det\begin{pmatrix} x_1 & y_1 & 1 \\ x_2 & y_2 & 1 \\ x_3 & y_3 & 1 \end{pmatrix}|\)

Step 1: Set up the coordinate matrix

\(M = \begin{pmatrix} 1 & 2 & 1 \\ 4 & 6 & 1 \\ 7 & 3 & 1 \end{pmatrix}\)

Step 2: Calculate the 3×3 determinant

Expanding along the third column: \(\det(M) = 1\begin{vmatrix} 4 & 6 \\ 7 & 3 \end{vmatrix} - 1\begin{vmatrix} 1 & 2 \\ 7 & 3 \end{vmatrix} + 1\begin{vmatrix} 1 & 2 \\ 4 & 6 \end{vmatrix}\)

\(= 1(12 - 42) - 1(3 - 14) + 1(6 - 8) = 1(-30) - 1(-11) + 1(-2) = -30 + 11 - 2 = -21\)

Step 3: Calculate the area

Area = \(\frac{1}{2}|−21| = \frac{1}{2} \times 21 = 10.5\)

Step 4: Verify using alternative method

Using the shoelace formula: Area = \(\frac{1}{2}|x_1(y_2-y_3) + x_2(y_3-y_1) + x_3(y_1-y_2)|\)

= \(\frac{1}{2}|1(6-3) + 4(3-2) + 7(2-6)| = \frac{1}{2}|3 + 4 - 28| = \frac{1}{2}|-21| = 10.5\) ✓

Area = 10.5 square units
Final Answer:

The area of the triangle is 10.5 square units

Geometric Applications:

• Determinants provide a direct method for calculating areas and volumes

• The sign of the determinant indicates orientation

• This method generalizes to higher dimensions

Comprehensive Summary: Determinants
Core Concepts:

Determinant: A scalar value computed from a square matrix that reveals important properties about the matrix, including whether it's invertible and how it scales areas/volumes.

Geometric Meaning: The absolute value of the determinant represents the factor by which the matrix scales n-dimensional volumes.

Calculation Methods:
  1. 2×2 Matrices: \(\det\begin{pmatrix} a & b \\ c & d \end{pmatrix} = ad - bc\)
  2. 3×3 Matrices - Sarrus Rule: Sum of positive diagonal products minus sum of negative diagonal products
  3. Cofactor Expansion: \(\det(A) = \sum_{j=1}^{n} a_{ij}C_{ij}\) for any row \(i\) or column \(j\)
Key Properties:

• \(\det(A) = \det(A^T)\) (transposes have same determinant)

• \(\det(kA) = k^n\det(A)\) for \(n \times n\) matrix

• \(\det(AB) = \det(A)\det(B)\) (multiplicative property)

• \(\det(A^{-1}) = \frac{1}{\det(A)}\) when \(A\) is invertible

• Swapping rows/columns changes sign of determinant

Memory Tip: For 2×2: "Diagonal product minus cross product"
Efficiency Tip: Always expand along the row/column with the most zeros
Verification Tip: Check your work by using an alternative method
Application Tip: Non-zero determinant means matrix is invertible
Problem-Solving Strategy
1
Verify Square Matrix
2
Choose Method
3
Apply Formula
4
Verify Result

Questions & Answers

Question: When should I use Sarrus rule vs cofactor expansion for 3×3 determinants?

Answer: Both methods are equivalent, but here's when to choose each:

  • Sarrus Rule: Best for general 3×3 matrices with no obvious zeros. It's systematic and hard to make arithmetic errors.
  • Cofactor Expansion: Best when there are zeros in a row or column. Choose the row/column with the most zeros to minimize calculations.

For example, if you have \(\begin{pmatrix} 1 & 0 & 2 \\ 3 & 4 & 5 \\ 6 & 0 & 7 \end{pmatrix}\), expand along the second column since it has two zeros, reducing the calculation to just one 2×2 determinant.

Question: What's the geometric meaning of a determinant being zero?

Answer: When a determinant is zero, the matrix transformation "collapses" space:

  • 2×2 case: The transformation maps the plane onto a line or point, resulting in zero area
  • 3×3 case: The transformation maps 3D space onto a plane, line, or point, resulting in zero volume

This geometric interpretation explains why singular matrices (determinant = 0) are not invertible - the transformation loses information and cannot be reversed.

Question: How do I remember the sign pattern in cofactor expansion?

Answer: The sign pattern follows \((-1)^{i+j}\) for element at position (i,j). Remember this checkerboard pattern:

+ - + - + - + - +

Start with positive in the top-left corner, then alternate signs in both directions. The pattern starts positive at (1,1) and continues with alternating signs.