Solved Exercises on Graphing Parametric Equations in Precalculus

Master graphing parametric equations: plotting curves, direction of motion, and geometric interpretation through these 5 detailed exercises.

Solution: Exercises 1 to 3
1 Linear parametric equations
Exercise 1
Graph the parametric equations x = 2t - 1, y = t + 3 for -2 ≤ t ≤ 3. Indicate the direction of motion.
Definition:

Parametric graph: A plot of points (x(t), y(t)) as the parameter t varies over a specified interval.

Solution method:
  1. Choose several values of t in the given interval
  2. Calculate corresponding (x, y) coordinates
  3. Plot the points on the coordinate plane
  4. Connect the points with a smooth curve
  5. Indicate direction of motion with arrows
Interval
-2 ≤ t ≤ 3
Parametric equations
x = 2t - 1, y = t + 3
Direction
Left to right
Step 1: Select values of t in the interval [-2, 3]

Let's choose: t = -2, -1, 0, 1, 2, 3

Step 2: Calculate corresponding coordinates

When t = -2: x = 2(-2) - 1 = -5, y = -2 + 3 = 1 → Point (-5, 1)

When t = -1: x = 2(-1) - 1 = -3, y = -1 + 3 = 2 → Point (-3, 2)

When t = 0: x = 2(0) - 1 = -1, y = 0 + 3 = 3 → Point (-1, 3)

When t = 1: x = 2(1) - 1 = 1, y = 1 + 3 = 4 → Point (1, 4)

When t = 2: x = 2(2) - 1 = 3, y = 2 + 3 = 5 → Point (3, 5)

When t = 3: x = 2(3) - 1 = 5, y = 3 + 3 = 6 → Point (5, 6)

Step 3: Plot the points

Plot points: (-5, 1), (-3, 2), (-1, 3), (1, 4), (3, 5), (5, 6)

Step 4: Connect points with a straight line

Since both x and y are linear functions of t, the graph is a straight line.

Step 5: Indicate direction of motion

As t increases from -2 to 3, x increases from -5 to 5, and y increases from 1 to 6.

The motion is from lower left to upper right.

Line segment from (-5, 1) to (5, 6)
Final answer:

The graph is a line segment from (-5, 1) to (5, 6) with motion from left to right

Applied rules:

• Linear parametric equations: x = at + b, y = ct + d form a straight line

• Direction of motion: Determined by how x and y change as t increases

• Endpoint identification: Evaluate at boundary values of t

Tip: For linear parametric equations, only plot the endpoints to draw the line.
Key note: Direction of motion is shown with arrows on the graph.
2 Circular motion
Exercise 2
Graph the parametric equations x = 3cos(t), y = 3sin(t) for 0 ≤ t ≤ 2π. Indicate the direction of motion.
Definition:

Parametric circle: Equations of the form x = h + r cos(t), y = k + r sin(t) trace a circle with center (h, k) and radius r.

Given
x = 3cos(t), y = 3sin(t)
Center and radius
(0, 0), r = 3
Direction
Counterclockwise
Step 1: Identify the center and radius

Comparing with x = h + r cos(t), y = k + r sin(t):

h = 0, k = 0, r = 3

Center: (0, 0), Radius: 3

Step 2: Select key values of t in [0, 2π]

t = 0, π/2, π, 3π/2, 2π

Step 3: Calculate coordinates

When t = 0: x = 3cos(0) = 3, y = 3sin(0) = 0 → Point (3, 0)

When t = π/2: x = 3cos(π/2) = 0, y = 3sin(π/2) = 3 → Point (0, 3)

When t = π: x = 3cos(π) = -3, y = 3sin(π) = 0 → Point (-3, 0)

When t = 3π/2: x = 3cos(3π/2) = 0, y = 3sin(3π/2) = -3 → Point (0, -3)

When t = 2π: x = 3cos(2π) = 3, y = 3sin(2π) = 0 → Point (3, 0)

Step 4: Plot the points and draw the circle

Plot points (3, 0), (0, 3), (-3, 0), (0, -3) and connect with a smooth circular curve.

Step 5: Determine direction of motion

As t increases from 0 to 2π, the motion is counterclockwise starting from (3, 0).

This is the standard orientation for parametric circles.

Step 6: Verify by eliminating the parameter

x² + y² = (3cos(t))² + (3sin(t))² = 9cos²(t) + 9sin²(t) = 9(cos²(t) + sin²(t)) = 9

So x² + y² = 9, which is indeed a circle with center (0, 0) and radius 3.

Circle: x² + y² = 9
Final answer:

The graph is a circle with center (0, 0) and radius 3, traced counterclockwise

Applied rules:

• Circle parametric form: x = h + r cos(t), y = k + r sin(t)

• Direction: Standard form traces counterclockwise

• Pythagorean identity: cos²(t) + sin²(t) = 1 for verification

Tip: For circles, use key angle values (0, π/2, π, 3π/2, 2π).
Key note: The parameter t represents the angle in circular motion.
3 Cycloid curve
Exercise 3
Graph the parametric equations x = t - sin(t), y = 1 - cos(t) for 0 ≤ t ≤ 4π. This is called a cycloid.
Definition:

Cycloid: The curve traced by a point on the circumference of a circle as the circle rolls along a straight line.

Given
x = t - sin(t), y = 1 - cos(t)
Interval
0 ≤ t ≤ 4π
Curve type
Cycloid
Step 1: Select values of t in [0, 4π]

Let's choose: t = 0, π/2, π, 3π/2, 2π, 5π/2, 3π, 7π/2, 4π

Step 2: Calculate coordinates using key values

When t = 0: x = 0 - sin(0) = 0, y = 1 - cos(0) = 0 → Point (0, 0)

When t = π/2: x = π/2 - sin(π/2) = π/2 - 1 ≈ 0.57, y = 1 - cos(π/2) = 1 → Point (0.57, 1)

When t = π: x = π - sin(π) = π - 0 = π, y = 1 - cos(π) = 1 - (-1) = 2 → Point (π, 2)

When t = 3π/2: x = 3π/2 - sin(3π/2) = 3π/2 - (-1) = 3π/2 + 1 ≈ 5.71, y = 1 - cos(3π/2) = 1 → Point (5.71, 1)

When t = 2π: x = 2π - sin(2π) = 2π - 0 = 2π, y = 1 - cos(2π) = 1 - 1 = 0 → Point (2π, 0)

When t = 3π: x = 3π - sin(3π) = 3π - 0 = 3π, y = 1 - cos(3π) = 1 - (-1) = 2 → Point (3π, 2)

When t = 4π: x = 4π - sin(4π) = 4π - 0 = 4π, y = 1 - cos(4π) = 1 - 1 = 0 → Point (4π, 0)

Step 3: Plot the points

Plot the calculated points and connect with a smooth curve.

Step 4: Observe the pattern

The cycloid has arches that repeat every 2π units along the x-axis.

Each arch rises to a maximum height of 2 and touches the x-axis at regular intervals.

Step 5: Analyze the motion

As t increases, x increases continuously while y oscillates between 0 and 2.

This represents a point on a rolling wheel moving forward while oscillating vertically.

Step 6: Verify the characteristic features

• The curve starts at (0, 0) and ends at (4π, 0)

• The maximum height of 2 occurs at t = π and t = 3π

• The curve touches the x-axis at t = 0, 2π, and 4π

Cycloid: x = t - sin(t), y = 1 - cos(t)
Final answer:

The graph is a cycloid with two complete arches from (0, 0) to (4π, 0)

Applied rules:

• Cycloid parametric form: x = at - a sin(t), y = a - a cos(t)

• Periodicity: The pattern repeats every 2π units

• Trigonometric evaluation: Use exact values for special angles

Tip: For cycloids, focus on critical points where sin(t) and cos(t) have known values.
Key note: Cycloids have applications in physics and engineering, particularly in pendulum design.
Graphing Parametric Equations Fundamentals
(x(t), y(t))
Parametric Point
Line
x = x₀ + at, y = y₀ + bt
Parametric line
Circle
x = h + r cos(t), y = k + r sin(t)
Parametric circle
Cycloid
x = at - a sin(t), y = a - a cos(t)
Parametric cycloid
dx/dt = x'(t), dy/dt = y'(t)
Parametric Derivatives
Parameter interval: Determines the portion of the curve to be graphed.
Direction of motion: Shown by arrows indicating how the curve is traced as t increases.
Solution: Exercises 4 to 5
4 Elliptical motion
Exercise 4
Graph the parametric equations x = 4cos(t), y = 2sin(t) for 0 ≤ t ≤ 2π. Find the Cartesian equation and identify the curve.
Definition:

Parametric ellipse: Equations of the form x = h + a cos(t), y = k + b sin(t) trace an ellipse with center (h, k) and semi-axes a and b.

Given
x = 4cos(t), y = 2sin(t)
Center and axes
(0, 0), a = 4, b = 2
Cartesian equation
x²/16 + y²/4 = 1
Step 1: Identify the center and semi-axes

Comparing with x = h + a cos(t), y = k + b sin(t):

h = 0, k = 0, a = 4, b = 2

Center: (0, 0), Semi-major axis: 4, Semi-minor axis: 2

Step 2: Select key values of t in [0, 2π]

t = 0, π/2, π, 3π/2, 2π

Step 3: Calculate coordinates

When t = 0: x = 4cos(0) = 4, y = 2sin(0) = 0 → Point (4, 0)

When t = π/2: x = 4cos(π/2) = 0, y = 2sin(π/2) = 2 → Point (0, 2)

When t = π: x = 4cos(π) = -4, y = 2sin(π) = 0 → Point (-4, 0)

When t = 3π/2: x = 4cos(3π/2) = 0, y = 2sin(3π/2) = -2 → Point (0, -2)

When t = 2π: x = 4cos(2π) = 4, y = 2sin(2π) = 0 → Point (4, 0)

Step 4: Plot the points and draw the ellipse

Plot points (4, 0), (0, 2), (-4, 0), (0, -2) and connect with a smooth elliptical curve.

Step 5: Find the Cartesian equation

From x = 4cos(t), we get cos(t) = x/4

From y = 2sin(t), we get sin(t) = y/2

Using cos²(t) + sin²(t) = 1:

(x/4)² + (y/2)² = 1

x²/16 + y²/4 = 1

Step 6: Identify the curve

This is the standard form of an ellipse with center at (0, 0), semi-major axis a = 4 (horizontal), and semi-minor axis b = 2 (vertical).

x²/16 + y²/4 = 1
Final answer:

The graph is an ellipse with center (0, 0), semi-major axis 4, semi-minor axis 2, traced counterclockwise

Applied rules:

• Ellipse parametric form: x = h + a cos(t), y = k + b sin(t)

• Cartesian conversion: Use cos²(t) + sin²(t) = 1

• Ellipse standard form: (x-h)²/a² + (y-k)²/b² = 1

Tip: For ellipses, use the same key angle values as for circles.
Key note: The larger coefficient corresponds to the longer semi-axis.
5 Projectile motion
Exercise 5
A projectile is launched with initial velocity 20 m/s at an angle of 45°. The parametric equations are x = 10√2 t, y = 10√2 t - 4.9t². Graph the trajectory for 0 ≤ t ≤ 2.88 seconds (until it hits the ground).
Definition:

Projectile motion: Motion under gravity with parametric equations x = v₀cos(θ)t, y = v₀sin(θ)t - (1/2)gt², where v₀ is initial velocity, θ is launch angle, and g is gravitational acceleration.

Given
x = 10√2 t, y = 10√2 t - 4.9t²
Time interval
0 ≤ t ≤ 2.88
Trajectory
Parabolic path
Step 1: Verify the parametric equations

Initial velocity: v₀ = 20 m/s, Launch angle: θ = 45°

v₀cos(45°) = 20 × (√2/2) = 10√2 ≈ 14.14 m/s

v₀sin(45°) = 20 × (√2/2) = 10√2 ≈ 14.14 m/s

So x = 10√2 t and y = 10√2 t - 4.9t² (with g = 9.8 m/s²)

Step 2: Select values of t in [0, 2.88]

Let's choose: t = 0, 0.5, 1, 1.5, 2, 2.5, 2.88

Step 3: Calculate coordinates

When t = 0: x = 0, y = 0 → Point (0, 0)

When t = 0.5: x = 10√2(0.5) ≈ 7.07, y = 10√2(0.5) - 4.9(0.25) ≈ 5.82 → Point (7.07, 5.82)

When t = 1: x = 10√2 ≈ 14.14, y = 10√2 - 4.9 ≈ 9.24 → Point (14.14, 9.24)

When t = 1.5: x = 15√2 ≈ 21.21, y = 15√2 - 4.9(2.25) ≈ 10.19 → Point (21.21, 10.19)

When t = 2: x = 20√2 ≈ 28.28, y = 20√2 - 4.9(4) ≈ 8.68 → Point (28.28, 8.68)

When t = 2.5: x = 25√2 ≈ 35.36, y = 25√2 - 4.9(6.25) ≈ 4.71 → Point (35.36, 4.71)

When t = 2.88: x = 28.8√2 ≈ 40.73, y = 28.8√2 - 4.9(8.29) ≈ 0.00 → Point (40.73, 0)

Step 4: Plot the points and draw the trajectory

Plot the calculated points and connect with a smooth parabolic curve.

Step 5: Analyze the motion

The projectile starts at the origin, rises to a maximum height, then falls back to ground level.

The horizontal motion is uniform (constant velocity), while the vertical motion is accelerated due to gravity.

Step 6: Find the maximum height and range

Maximum height occurs when dy/dt = 0: 10√2 - 9.8t = 0 → t = 10√2/9.8 ≈ 1.44s

Max height: y = 10√2(1.44) - 4.9(1.44)² ≈ 10.39m

Range: x = 10√2(2.88) ≈ 40.73m

Parabolic trajectory from (0,0) to (40.73,0)
Final answer:

The graph is a parabolic trajectory with maximum height approximately 10.39m and range approximately 40.73m

Applied rules:

• Projectile parametric form: x = v₀cos(θ)t, y = v₀sin(θ)t - (1/2)gt²

• Maximum height: Occurs when vertical velocity dy/dt = 0

• Range: Horizontal distance when projectile returns to ground level

Tip: For projectile motion, always consider the physics: horizontal motion is uniform, vertical is accelerated.
Key note: The trajectory is symmetric about the maximum height point.
Fundamental Laws, Methods, and Key Concepts in Graphing Parametric Equations
x = f(t), y = g(t)
General Parametric Form
Key definitions:

Parametric equations: Expressions for x and y in terms of a parameter t: x = f(t), y = g(t).

Parametric curve: The path traced by the point (x(t), y(t)) as t varies over an interval.

Direction of motion: The orientation of the curve as t increases.

Parameter interval: The range of values for the parameter t that defines the portion of the curve to be graphed.

Complete methodology:
  1. Analyze the equations: Identify the type of curve (linear, circular, etc.).
  2. Select parameter values: Choose appropriate values of t in the given interval.
  3. Calculate coordinates: Find (x, y) values for each selected t value.
  4. Plot points: Mark the calculated points on the coordinate plane.
  5. Draw the curve: Connect points with a smooth curve following the direction of motion.
  6. Label and indicate: Show direction with arrows and label key features.
Tip 1: For circular motion, use key angles: 0, π/2, π, 3π/2, 2π.
Tip 2: Always indicate the direction of motion with arrows.
Tip 3: For projectile motion, the horizontal velocity is constant while vertical velocity changes due to gravity.
Tip 4: Use technology to verify hand-drawn graphs when possible.
Common errors: Forgetting direction arrows, incorrect scale, missing key points, miscalculating coordinates.
Exam preparation: Practice graphing standard curves, memorize parametric forms, master direction analysis.
Formulas to know by heart:

• Line: x = x₀ + at, y = y₀ + bt

• Circle: x = h + r cos(t), y = k + r sin(t)

• Ellipse: x = h + a cos(t), y = k + b sin(t)

• Cycloid: x = at - a sin(t), y = a - a cos(t)

• Projectile: x = v₀cos(θ)t, y = v₀sin(θ)t - (1/2)gt²

• Direction: determined by how x and y change as t increases

Comprehensive Summary: Graphing Parametric Equations

This section provides a detailed overview of graphing parametric equations, including definitions, rules, methods, examples, and tips for mastering parametric curve visualization.

Definitions & Keywords

Parametric Equations: A pair of equations expressing x and y in terms of a parameter t.

Parametric Curve: The path traced by the point (x(t), y(t)) as t varies.

Direction of Motion: The orientation of the curve as the parameter increases.

Parameter Interval: The range of values for t that defines the portion of the curve.

Parametric Point: A point (x(t), y(t)) on the curve corresponding to a specific value of t.

Key Points: Points on the curve corresponding to significant parameter values.

Cartesian Conversion: The process of eliminating the parameter to find a relationship between x and y.

Core Rules & Principles

General Form: x = f(t), y = g(t) for some functions f and g.

Direction Determination: As t increases, observe how x and y change to determine motion direction.

Linear Parametrics: x = x₀ + at, y = y₀ + bt forms a straight line.

Circular Parametrics: x = h + r cos(t), y = k + r sin(t) forms a circle.

Elliptical Parametrics: x = h + a cos(t), y = k + b sin(t) forms an ellipse.

Projectile Motion: x = v₀cos(θ)t, y = v₀sin(θ)t - (1/2)gt² describes trajectory.

Pythagorean Identity: cos²(t) + sin²(t) = 1 for circular/elliptical verification.

Step-by-Step Methods

Method 1 - Graphing Process:

  1. Identify the type of curve from the parametric equations
  2. Select appropriate values of t in the given interval
  3. Calculate corresponding (x, y) coordinates
  4. Plot the points on the coordinate plane
  5. Connect points with a smooth curve
  6. Indicate direction of motion with arrows
  7. Label key features and endpoints

Method 2 - Direction Analysis:

  1. Examine how x changes as t increases
  2. Examine how y changes as t increases
  3. Determine the combined effect on motion direction
  4. Sketch arrows to indicate the direction of motion

Examples & Applications

Simple Example: Line x = t, y = 2t: straight line y = 2x with slope 2.

Intermediate Example: Circle x = cos(t), y = sin(t): unit circle traced counterclockwise.

Advanced Example: Cycloid x = t - sin(t), y = 1 - cos(t): curve traced by point on rolling wheel.

Physics Application: Projectile motion trajectories and orbital mechanics.

Engineering Use: Designing curved structures and robotic path planning.

Computer Graphics: Drawing curves and animating motion paths.

Tips & Common Pitfalls

Tips:

  • Always indicate direction of motion with arrows on the graph
  • Use key angle values (0, π/2, π, 3π/2, 2π) for circular functions
  • Check that your plotted points satisfy the original parametric equations
  • Consider the scale of your axes to properly represent the curve
  • For projectile motion, note that horizontal velocity is constant

Common Pitfalls:

  • Forgetting to indicate the direction of motion
  • Choosing too few points leading to an inaccurate curve
  • Miscalculating coordinates due to arithmetic errors
  • Not considering the parameter interval restrictions
  • Confusing the direction of motion based on parameter increase

Key Notes for Memorization

Standard Forms: Memorize parametric equations for lines, circles, and ellipses.

Direction Rule: As t increases, trace the curve in the direction of motion.

Trigonometric Identities: Use cos²(t) + sin²(t) = 1 to verify circular/elliptical curves.

Projectile Motion: Horizontal motion is uniform, vertical motion is accelerated.

Scale Consideration: Choose appropriate axis scales to show curve features clearly.

Verification Strategy: Always verify a few points by substituting parameter values.

Questions & Answers

Question: How do I determine the direction of motion for a parametric curve?

Answer: The direction of motion is determined by how the coordinates change as the parameter increases:

  • Track coordinate changes: As t increases, see how x and y change individually
  • Combine effects: Determine the overall direction based on both x and y changes
  • Plot sequential points: Plot points for increasing t values to visualize the path

For example, if x increases and y increases as t increases, the motion is toward the upper right. If x decreases and y increases, the motion is toward the upper left.

Question: How many points should I plot to accurately graph a parametric curve?

Answer: The number of points depends on the complexity of the curve:

  • Linear parametrics: Only 2 points (endpoints) are needed
  • Circular/elliptical: 4-5 points at key angles (0, π/2, π, 3π/2, 2π)
  • Complex curves: 6-8 points or more to capture shape accurately
  • General rule: Plot enough points so that the curve's shape is clear and smooth

Always include points at the boundaries of the parameter interval and any critical points where the curve changes direction significantly.

Question: What's the advantage of using parametric equations instead of regular functions for graphing?

Answer: Parametric equations offer several advantages:

  1. Represent non-functions: Can graph curves that fail the vertical line test (like circles)
  2. Provide motion information: Show how a point moves over time or along a path
  3. Describe complex curves: Some curves are easier to express parametrically than as y = f(x)
  4. Include direction: Show the orientation and direction of traversal
  5. Physics applications: Naturally model position, velocity, and acceleration over time

Parametric equations give more information than standard functions, including temporal and directional aspects of curves.