Sine ratio: sin(θ) = opposite/hypotenuse
- Identify the known angle and sides
- Select the appropriate trigonometric ratio
- Set up the equation using the ratio
- Solve for the unknown side
We have: ∠C = 90° (right angle), ∠A = 30°, hypotenuse AC = 10 units
We want to find: side BC (opposite to angle A)
Since we know the hypotenuse and want the opposite side, we use sine:
sin(30°) = opposite/hypotenuse = BC/AC
sin(30°) = BC/10
From trigonometric tables: sin(30°) = 1/2 = 0.5
So: 0.5 = BC/10
Multiply both sides by 10: BC = 0.5 × 10 = 5
The length of side BC is 5 units
• SOHCAHTOA: Remember: Sin = Opposite/Hypotenuse, Cos = Adjacent/Hypotenuse, Tan = Opposite/Adjacent
• Special angles: Know exact values for 30°, 45°, 60°
• Algebra: Cross multiply to solve for unknowns
Cosine ratio: cos(θ) = adjacent/hypotenuse
For angle X: XY is adjacent, XZ is hypotenuse, YZ is opposite
Known: XY = 8 (adjacent), XZ = 10 (hypotenuse)
cos(X) = adjacent/hypotenuse = XY/XZ = 8/10 = 0.8
X = arccos(0.8) = cos⁻¹(0.8)
Using calculator: X ≈ 36.87°
YZ² = XZ² - XY² = 10² - 8² = 100 - 64 = 36
YZ = 6 units
sin(X) = YZ/XZ = 6/10 = 0.6
arcsin(0.6) ≈ 36.87° ✓
Angle X is approximately 36.87°
• Inverse trigonometric functions: Use cos⁻¹, sin⁻¹, tan⁻¹ to find angles
• Pythagorean theorem: a² + b² = c² for verification
• Complementary angles: In right triangles, non-right angles sum to 90°
Tangent ratio: tan(θ) = opposite/adjacent
Let the wall be vertical (opposite side), ground be horizontal (adjacent side), and ladder be hypotenuse
Angle between ground and ladder = 60°, distance from wall = 5 ft
tan(60°) = opposite/adjacent = height/5
√3 = height/5 (since tan(60°) = √3 ≈ 1.732)
height = 5√3 ≈ 8.66 ft
Ladder² = height² + base²
Ladder² = (5√3)² + 5² = 75 + 25 = 100
Ladder = √100 = 10 ft
cos(60°) = adjacent/hypotenuse = 5/Ladder
1/2 = 5/Ladder
Ladder = 10 ft
The ladder is 10 feet long
• Real-world modeling: Translate word problems into geometric diagrams
• Multiple approaches: Same problem can be solved using different ratios
• Exact vs approximate: Use exact values when possible (√3 instead of 1.732)
Angle of elevation: The angle between the horizontal and the line of sight to an object above the horizontal.
Draw two right triangles sharing the same vertical height (building).
First position: angle = 45°, distance = d₁ from building
Second position: angle = 60°, distance = d₂ = d₁ - 30 from building
For first position: tan(45°) = h/d₁ → h = d₁ (since tan(45°) = 1)
For second position: tan(60°) = h/d₂ → h = d₂·√3 (since tan(60°) = √3)
Since both expressions equal h: d₁ = d₂·√3
Also: d₂ = d₁ - 30
Substituting: d₁ = (d₁ - 30)·√3
d₁ = d₁·√3 - 30√3
d₁ - d₁·√3 = -30√3
d₁(1 - √3) = -30√3
d₁ = -30√3/(1 - √3) = 30√3/(√3 - 1)
d₁ = 30√3/(√3 - 1) × (√3 + 1)/(√3 + 1)
d₁ = 30√3(√3 + 1)/(3 - 1) = 30√3(√3 + 1)/2 = 15√3(√3 + 1)
d₁ = 15(3 + √3) = 45 + 15√3 ≈ 45 + 25.98 = 70.98m
Since h = d₁, the height is approximately 70.98 meters.
The building is approximately 70.98 meters tall
• System of equations: Use multiple measurements to create solvable systems
• Rationalization: Multiply by conjugate to simplify expressions with radicals
• Angle of elevation: Always measured from horizontal upward
Complete triangle solution: Finding all three sides and all three angles when given partial information.
Given: ∠E = 90° (right angle), DE = 12 cm (adjacent to ∠D), ∠D = 25°
Need to find: EF (opposite to ∠D), DF (hypotenuse), ∠F
In any triangle: ∠D + ∠E + ∠F = 180°
25° + 90° + ∠F = 180°
∠F = 180° - 115° = 65°
tan(D) = opposite/adjacent = EF/DE
tan(25°) = EF/12
EF = 12 × tan(25°) ≈ 12 × 0.4663 ≈ 5.59 cm
cos(D) = adjacent/hypotenuse = DE/DF
cos(25°) = 12/DF
DF = 12/cos(25°) ≈ 12/0.9063 ≈ 13.27 cm
DE² + EF² = DF²
12² + 5.59² = 144 + 31.25 = 175.25
13.27² ≈ 176.1
The small difference is due to rounding. ✓
All sides: DE = 12cm, EF ≈ 5.59cm, DF ≈ 13.27cm
All angles: ∠D = 25°, ∠E = 90°, ∠F = 65°
• Angle sum property: Triangle angles sum to 180°
• Trigonometric ratios: Choose based on known and unknown sides
• Verification: Always check results with Pythagorean theorem
Trigonometric ratios: Relationships between sides of a right triangle and its angles.
SOHCAHTOA: Mnemonic for sine, cosine, and tangent definitions.
Angle of elevation/depression: Angles measured from horizontal to line of sight.
- Diagram creation: Draw the right triangle and label all known values.
- Side identification: Determine which sides are opposite, adjacent, and hypotenuse relative to the angle of interest.
- Ratio selection: Choose the appropriate trigonometric ratio based on known and unknown values.
- Equation setup: Write the trigonometric equation and solve for the unknown.
- Verification: Check results using alternative methods or the Pythagorean theorem.
• Basic ratios: sin(θ) = opp/hyp, cos(θ) = adj/hyp, tan(θ) = opp/adj
• Reciprocal ratios: csc(θ) = 1/sin(θ), sec(θ) = 1/cos(θ), cot(θ) = 1/tan(θ)
• Pythagorean theorem: a² + b² = c²
• Pythagorean identities: sin²(θ) + cos²(θ) = 1, 1 + tan²(θ) = sec²(θ)
• Special angle values: sin(30°)=1/2, sin(45°)=√2/2, sin(60°)=√3/2, etc.
Questions & Answers
Question: I'm confused about when to use sine versus cosine in right triangle problems. How do I decide which one to use?
Answer: Great question! The choice depends on which sides you know and which you need to find:
- Use sine when you have or need the opposite side and the hypotenuse: sin(θ) = opposite/hypotenuse
- Use cosine when you have or need the adjacent side and the hypotenuse: cos(θ) = adjacent/hypotenuse
- Use tangent when you have or need the opposite and adjacent sides: tan(θ) = opposite/adjacent
Remember SOHCAHTOA: Sine = Opposite over Hypotenuse, Cosine = Adjacent over Hypotenuse, Tangent = Opposite over Adjacent.
Example: If you know the hypotenuse and want the side opposite to the angle, use sine. If you know the hypotenuse and want the side adjacent to the angle, use cosine.
Question: How do I know if I should use regular trigonometric ratios or inverse trigonometric functions?
Answer: The decision depends on what you're trying to find:
- Use regular trig ratios (sin, cos, tan) when you know an angle and want to find a side length
- Use inverse trig functions (sin⁻¹, cos⁻¹, tan⁻¹) when you know two sides and want to find an angle
Think of it this way: regular ratios take an angle and give you a ratio of sides, while inverse ratios take a ratio of sides and give you an angle.
Examples:
- Finding a side: Given angle A = 30° and hypotenuse = 10, find opposite side → sin(30°) = opp/10
- Finding an angle: Given opposite = 5 and adjacent = 5, find angle → tan⁻¹(5/5) = angle
Question: I have trouble remembering the exact values for special angles like 30°, 45°, and 60°. Any memory aids?
Answer: Here are effective memory aids for special angle values:
For sine values: Think of the sequence √0/2, √1/2, √2/2, √3/2, √4/2 for angles 0°, 30°, 45°, 60°, 90°
For cosine values: It's the reverse sequence: √4/2, √3/2, √2/2, √1/2, √0/2
For tangent values: Just divide sine by cosine for each angle
Visual memory: Think of the 45-45-90 triangle (sides 1-1-√2) and 30-60-90 triangle (sides 1-√3-2) to derive values.
Practice drawing these triangles frequently to reinforce the relationships!