Solved Exercises on Sine, Cosine, and Tangent Ratios in Precalculus

Master sine, cosine, and tangent ratios: definitions, applications, and problem-solving techniques through these 5 detailed exercises.

Solution: Exercises 1 to 3
1 Finding missing side with sine
Exercise 1
In right triangle ABC, where angle C = 90°, angle A = 40°, and hypotenuse AB = 15 cm. Find the length of side BC (opposite to angle A).
Definition:

Sine ratio: sin(θ) = opposite/hypotenuse

Solution method:
  1. Identify the known angle and sides
  2. Select the appropriate trigonometric ratio
  3. Set up the equation using the ratio
  4. Solve for the unknown side
Given
∠A = 40°, AB = 15, BC = ?
Sine ratio
sin(A) = BC/AB
Solution
BC ≈ 9.64 cm
Step 1: Identify known values

We have: ∠C = 90° (right angle), ∠A = 40°, hypotenuse AB = 15 cm

We want to find: side BC (opposite to angle A)

Step 2: Select the appropriate ratio

Since we know the hypotenuse and want the opposite side, we use sine:

sin(40°) = opposite/hypotenuse = BC/AB

Step 3: Set up the equation

sin(40°) = BC/15

From trigonometric tables: sin(40°) ≈ 0.6428

So: 0.6428 = BC/15

Step 4: Solve for BC

Multiply both sides by 15: BC = 0.6428 × 15 ≈ 9.64 cm

BC ≈ 9.64 cm
Final answer:

The length of side BC is approximately 9.64 cm

Applied rules:

• SOHCAHTOA: Remember: Sin = Opposite/Hypotenuse, Cos = Adjacent/Hypotenuse, Tan = Opposite/Adjacent

• Calculator use: Know how to access trigonometric functions

• Algebra: Cross multiply to solve for unknowns

Tip: Always identify which sides are opposite, adjacent, and hypotenuse relative to the given angle.
Key note: The hypotenuse is always the longest side in a right triangle.
2 Finding angle with cosine
Exercise 2
In right triangle PQR, where angle Q = 90°, side PQ = 7 units, and hypotenuse PR = 10 units. Find angle P.
Definition:

Cosine ratio: cos(θ) = adjacent/hypotenuse

Given
PQ = 7, PR = 10, ∠Q = 90°
Cosine ratio
cos(P) = PQ/PR
Angle
∠P ≈ 45.57°
Step 1: Identify the sides relative to angle P

For angle P: PQ is adjacent, PR is hypotenuse, QR is opposite

Known: PQ = 7 (adjacent), PR = 10 (hypotenuse)

Step 2: Apply cosine ratio

cos(P) = adjacent/hypotenuse = PQ/PR = 7/10 = 0.7

Step 3: Find the angle using inverse cosine

P = arccos(0.7) = cos⁻¹(0.7)

Using calculator: P ≈ 45.57°

Step 4: Verify using Pythagorean theorem

QR² = PR² - PQ² = 10² - 7² = 100 - 49 = 51

QR = √51 ≈ 7.14 units

sin(P) = QR/PR ≈ 7.14/10 = 0.714

arcsin(0.714) ≈ 45.57° ✓

∠P ≈ 45.57°
Final answer:

Angle P is approximately 45.57°

Applied rules:

• Inverse trigonometric functions: Use cos⁻¹, sin⁻¹, tan⁻¹ to find angles

• Pythagorean theorem: a² + b² = c² for verification

• Complementary angles: In right triangles, non-right angles sum to 90°

Tip: Always verify your angle calculation by checking another trigonometric ratio.
Key note: The cosine of an angle decreases as the angle increases from 0° to 90°.
3 Finding side with tangent
Exercise 3
A person standing 20 meters away from the base of a tree observes that the angle of elevation to the top of the tree is 35°. How tall is the tree?
Definition:

Tangent ratio: tan(θ) = opposite/adjacent

Given
Angle = 35°, Distance = 20 m
Find
Tree height
Result
Height ≈ 14.00 m
Step 1: Draw and label the right triangle

Let the tree be vertical (opposite side), ground be horizontal (adjacent side)

Angle of elevation = 35°, distance from tree = 20 m

Step 2: Apply the tangent ratio

tan(35°) = opposite/adjacent = height/distance

tan(35°) = height/20

From calculator: tan(35°) ≈ 0.7002

Step 3: Solve for the height

0.7002 = height/20

height = 0.7002 × 20 ≈ 14.00 m

Step 4: Verify with sine and cosine

Using Pythagorean theorem: hypotenuse = √(20² + 14²) = √(400 + 196) = √596 ≈ 24.41 m

sin(35°) ≈ 14/24.41 ≈ 0.5736 (matches calculator value)

Tree height ≈ 14.00 meters
Final answer:

The tree is approximately 14.00 meters tall

Applied rules:

• Real-world modeling: Translate word problems into geometric diagrams

• Angle of elevation: Always measured from horizontal upward

• Verification: Check results using alternative methods

Tip: Draw a diagram first to visualize the problem clearly.
Key note: For small angles (less than 45°), the tangent value is less than 1.
Trigonometric Ratios and Fundamental Laws
SOH CAH TOA
Memory Aid for Trigonometric Ratios
Sine
sin(θ) = opp/hyp
Sine = Opposite over Hypotenuse
Cosine
cos(θ) = adj/hyp
Cosine = Adjacent over Hypotenuse
Tangent
tan(θ) = opp/adj
Tangent = Opposite over Adjacent
a² + b² = c²
Pythagorean Theorem
Triangle sides: Hypotenuse (longest, opposite right angle), Opposite (across from reference angle), Adjacent (next to reference angle).
Special angles: sin(30°)=1/2, cos(30°)=√3/2, tan(30°)=1/√3; sin(45°)=cos(45°)=√2/2; sin(60°)=√3/2, cos(60°)=1/2, tan(60°)=√3.
Solution: Exercises 4 to 5
4 Multi-step problem with all ratios
Exercise 4
In right triangle LMN with right angle at M, angle L = 20°, and side MN = 8 cm. Find all sides and angles of the triangle, then calculate sin(L), cos(L), and tan(L).
Definition:

Complete triangle solution: Finding all three sides and all three angles when given partial information.

Given
∠M = 90°, ∠L = 20°, MN = 8
Find
LM, LN, ∠N
Results
LM ≈ 22.0cm, LN ≈ 23.4cm, ∠N = 70°
Step 1: Identify what's known and needed

Given: ∠M = 90° (right angle), ∠L = 20°, MN = 8 cm (opposite to ∠L)

Need to find: LM (adjacent to ∠L), LN (hypotenuse), ∠N

Step 2: Find the third angle

In any triangle: ∠L + ∠M + ∠N = 180°

20° + 90° + ∠N = 180°

∠N = 180° - 110° = 70°

Step 3: Find LM using tangent

tan(L) = opposite/adjacent = MN/LM

tan(20°) = 8/LM

From calculator: tan(20°) ≈ 0.3640

LM = 8/0.3640 ≈ 21.98 ≈ 22.0 cm

Step 4: Find LN using sine

sin(L) = opposite/hypotenuse = MN/LN

sin(20°) = 8/LN

From calculator: sin(20°) ≈ 0.3420

LN = 8/0.3420 ≈ 23.4 cm

Step 5: Verify with Pythagorean theorem

MN² + LM² = LN²

8² + 22.0² = 64 + 484 = 548

23.4² ≈ 547.6

The small difference is due to rounding. ✓

Step 6: Calculate the trigonometric ratios for angle L

sin(L) = MN/LN = 8/23.4 ≈ 0.3420

cos(L) = LM/LN = 22.0/23.4 ≈ 0.9402

tan(L) = MN/LM = 8/22.0 ≈ 0.3636

LM ≈ 22.0cm, LN ≈ 23.4cm, ∠N = 70°
Final answer:

All sides: MN = 8cm, LM ≈ 22.0cm, LN ≈ 23.4cm

All angles: ∠L = 20°, ∠M = 90°, ∠N = 70°

Trig ratios: sin(20°) ≈ 0.3420, cos(20°) ≈ 0.9402, tan(20°) ≈ 0.3636

Applied rules:

• Angle sum property: Triangle angles sum to 180°

• Trigonometric ratios: Choose based on known and unknown sides

• Verification: Always check results with Pythagorean theorem

Tip: In right triangles, knowing one acute angle automatically gives you the other.
Key note: Complementary angles in right triangles: 20° and 70° sum to 90°.
5 Real-world application
Exercise 5
A pilot flying at an altitude of 3000 feet needs to descend at an angle of 5° to land safely. How far horizontally from the runway should the pilot begin the descent?
Definition:

Angle of depression: The angle between the horizontal and the line of sight to an object below the horizontal.

Given
Altitude = 3000 ft, Angle = 5°
Find
Horizontal distance
Result
Distance ≈ 34,377 ft
Step 1: Draw the situation

Create a right triangle where the vertical leg is the altitude (3000 ft), the horizontal leg is the distance to the runway, and the hypotenuse is the flight path.

The angle of depression from the plane to the runway is 5°.

Step 2: Identify the appropriate ratio

Looking at the angle of depression (5°), the altitude is the opposite side and the horizontal distance is the adjacent side.

So we use: tan(5°) = opposite/adjacent = altitude/distance

Step 3: Set up the equation

tan(5°) = 3000/distance

From calculator: tan(5°) ≈ 0.0875

0.0875 = 3000/distance

Step 4: Solve for distance

Multiply both sides by distance: 0.0875 × distance = 3000

distance = 3000/0.0875 ≈ 34,377 feet

Step 5: Convert to miles if needed

34,377 feet ÷ 5280 feet/mile ≈ 6.51 miles

The pilot should begin descent about 6.51 miles from the runway.

Horizontal distance ≈ 34,377 feet
Final answer:

The pilot should begin descent approximately 34,377 feet (about 6.51 miles) from the runway

Applied rules:

• Real-world modeling: Translate word problems into geometric diagrams

• Angle of depression: Measured from horizontal downward

• Unit conversion: Convert between different units when necessary

Tip: Small angles of descent mean large horizontal distances.
Key note: For small angles (less than 10°), the tangent value is approximately equal to the angle in radians.
Fundamental Laws, Methods, and Key Concepts in Sine, Cosine, and Tangent Ratios
sin²(θ) + cos²(θ) = 1
Pythagorean Identity
Key definitions:

Trigonometric ratios: Relationships between sides of a right triangle and its angles.

SOHCAHTOA: Mnemonic for sine, cosine, and tangent definitions.

Angle of elevation/depression: Angles measured from horizontal to line of sight.

Complete methodology:
  1. Diagram creation: Draw the right triangle and label all known values.
  2. Side identification: Determine which sides are opposite, adjacent, and hypotenuse relative to the angle of interest.
  3. Ratio selection: Choose the appropriate trigonometric ratio based on known and unknown values.
  4. Equation setup: Write the trigonometric equation and solve for the unknown.
  5. Verification: Check results using alternative methods or the Pythagorean theorem.
Tip 1: Always draw a diagram first, even if the problem seems simple.
Tip 2: Remember that sine and cosine values are always between -1 and 1.
Tip 3: In right triangles, the two acute angles are complementary (sum to 90°).
Tip 4: For special angles (30°, 45°, 60°), memorize exact values rather than decimal approximations.
Common errors: Confusing opposite/adjacent sides, using wrong trigonometric ratio, forgetting to convert between degrees/radians.
Exam preparation: Practice all six trigonometric ratios, memorize special angle values, master word problem translation.
Formulas to know by heart:

• Basic ratios: sin(θ) = opp/hyp, cos(θ) = adj/hyp, tan(θ) = opp/adj

• Reciprocal ratios: csc(θ) = 1/sin(θ), sec(θ) = 1/cos(θ), cot(θ) = 1/tan(θ)

• Pythagorean theorem: a² + b² = c²

• Pythagorean identities: sin²(θ) + cos²(θ) = 1, 1 + tan²(θ) = sec²(θ)

• Special angle values: sin(30°)=1/2, sin(45°)=√2/2, sin(60°)=√3/2, etc.

Comprehensive Summary: Sine, Cosine, and Tangent Ratios

This section provides a detailed overview of sine, cosine, and tangent ratios, including definitions, rules, methods, examples, and tips for mastering these fundamental trigonometric concepts.

Definitions & Keywords

Right Triangle: A triangle with one 90° angle.

Hypotenuse: The longest side, opposite the right angle.

Opposite Side: The side across from the reference angle.

Adjacent Side: The side next to the reference angle (not the hypotenuse).

Sine (sin): Ratio of opposite side to hypotenuse.

Cosine (cos): Ratio of adjacent side to hypotenuse.

Tangent (tan): Ratio of opposite side to adjacent side.

SOHCAHTOA: Memory aid for ratios (Sin=Opp/Hyp, Cos=Adj/Hyp, Tan=Opp/Adj).

Core Rules & Principles

Pythagorean Theorem: a² + b² = c² (where c is the hypotenuse).

Pythagorean Identity: sin²(θ) + cos²(θ) = 1.

Complementary Angles: In right triangles, non-right angles sum to 90°.

Range of Values: sin(θ) and cos(θ) range from -1 to 1, tan(θ) ranges from -∞ to ∞.

Angle of Elevation: Angle from horizontal upward to line of sight.

Angle of Depression: Angle from horizontal downward to line of sight.

Reciprocal Identities: csc(θ) = 1/sin(θ), sec(θ) = 1/cos(θ), cot(θ) = 1/tan(θ).

Step-by-Step Methods

Method 1 - Finding a Side:

  1. Identify the known angle and known side
  2. Determine which sides are opposite, adjacent, and hypotenuse
  3. Choose the appropriate ratio (SOHCAHTOA)
  4. Set up the equation with the ratio
  5. Solve for the unknown side using algebra
  6. Verify with Pythagorean theorem

Method 2 - Finding an Angle:

  1. Identify two known sides
  2. Choose the appropriate ratio based on known sides
  3. Set up the ratio equation
  4. Use inverse trig function (sin⁻¹, cos⁻¹, tan⁻¹)
  5. Calculate the angle
  6. Verify with other trig ratios

Examples & Applications

Simple Example: In a 30-60-90 triangle with hypotenuse 10, find the side opposite 30°.

sin(30°) = opp/hyp → 0.5 = opp/10 → opp = 5

Intermediate Example: Find angle θ if adjacent = 8 and hypotenuse = 10.

cos(θ) = 8/10 = 0.8 → θ = cos⁻¹(0.8) ≈ 36.87°

Advanced Example: From point A, angle of elevation to top of tower is 40°. Moving 15m closer, angle becomes 60°. Find tower height.

Uses system of equations: h = d₁×tan(40°) = (d₁-15)×tan(60°)

Tips & Common Pitfalls

Tips:

  • Always draw a diagram first
  • Label sides clearly relative to the angle of interest
  • Check that your answer makes sense (e.g., hypotenuse should be longest)
  • Verify using alternative methods
  • Memorize special angle values (30°, 45°, 60°)

Common Pitfalls:

  • Mixing up opposite and adjacent sides
  • Using wrong trigonometric ratio
  • Forgetting to set calculator to correct mode (degrees vs radians)
  • Not checking if answer is reasonable
  • Confusing angle of elevation with depression

Key Notes for Memorization

SOHCAHTOA: The most important memory aid - Sin=Opp/Hyp, Cos=Adj/Hyp, Tan=Opp/Adj.

Special Triangles: 30-60-90 has sides in ratio 1:√3:2; 45-45-90 has sides in ratio 1:1:√2.

Angle Relationships: As angle increases from 0° to 90°, sin increases from 0 to 1, cos decreases from 1 to 0, tan increases from 0 to ∞.

Quadrant Signs: In first quadrant (0° to 90°), all ratios are positive.

Pythagorean Connection: The identity sin²(θ) + cos²(θ) = 1 comes directly from a² + b² = c².

Calculator Skills: Know how to use sin, cos, tan, sin⁻¹, cos⁻¹, tan⁻¹ functions.

Questions & Answers

Question: I'm confused about when to use sine versus cosine in right triangle problems. How do I decide which one to use?

Answer: Great question! The choice depends on which sides you know and which you need to find:

  • Use sine when you have or need the opposite side and the hypotenuse: sin(θ) = opposite/hypotenuse
  • Use cosine when you have or need the adjacent side and the hypotenuse: cos(θ) = adjacent/hypotenuse
  • Use tangent when you have or need the opposite and adjacent sides: tan(θ) = opposite/adjacent

Remember SOHCAHTOA: Sine = Opposite over Hypotenuse, Cosine = Adjacent over Hypotenuse, Tangent = Opposite over Adjacent.

Example: If you know the hypotenuse and want the side opposite to the angle, use sine. If you know the hypotenuse and want the side adjacent to the angle, use cosine.

Question: How do I know if I should use regular trigonometric ratios or inverse trigonometric functions?

Answer: The decision depends on what you're trying to find:

  • Use regular trig ratios (sin, cos, tan) when you know an angle and want to find a side length
  • Use inverse trig functions (sin⁻¹, cos⁻¹, tan⁻¹) when you know two sides and want to find an angle

Think of it this way: regular ratios take an angle and give you a ratio of sides, while inverse ratios take a ratio of sides and give you an angle.

Examples:
- Finding a side: Given angle A = 30° and hypotenuse = 10, find opposite side → sin(30°) = opp/10
- Finding an angle: Given opposite = 5 and adjacent = 5, find angle → tan⁻¹(5/5) = angle

Question: I have trouble remembering the exact values for special angles like 30°, 45°, and 60°. Any memory aids?

Answer: Here are effective memory aids for special angle values:

For sine values: Think of the sequence √0/2, √1/2, √2/2, √3/2, √4/2 for angles 0°, 30°, 45°, 60°, 90°

For cosine values: It's the reverse sequence: √4/2, √3/2, √2/2, √1/2, √0/2

For tangent values: Just divide sine by cosine for each angle

Visual memory: Think of the 45-45-90 triangle (sides 1-1-√2) and 30-60-90 triangle (sides 1-√3-2) to derive values.

Practice drawing these triangles frequently to reinforce the relationships!