Work Rate Problem: Problems involving the rate at which individuals or machines complete a task, often expressed as "work done per unit time".
- Define variables for unknown rates or times
- Express each worker's rate as "part of job completed per unit time"
- Combine rates when working together: combined rate = rate₁ + rate₂
- Set up equation using: (combined rate) × (time) = 1 complete job
- Solve for the unknown variable
Let \(x\) = time (in hours) for the second painter to complete the job alone
Rate of first painter = \(\frac{1}{10}\) of the job per hour
Rate of second painter = \(\frac{1}{x}\) of the job per hour
Combined rate = Rate of first + Rate of second = \(\frac{1}{10} + \frac{1}{x}\)
Time working together = 6 hours
Equation: \((\frac{1}{10} + \frac{1}{x}) \times 6 = 1\) (complete job)
\(\frac{6}{10} + \frac{6}{x} = 1\)
\(\frac{3}{5} + \frac{6}{x} = 1\)
\(\frac{6}{x} = 1 - \frac{3}{5} = \frac{2}{5}\)
\(\frac{6}{x} = \frac{2}{5}\)
\(6 \times 5 = 2 \times x\)
\(30 = 2x\)
\(x = 15\)
First painter's rate: \(\frac{1}{10}\) job/hour
Second painter's rate: \(\frac{1}{15}\) job/hour
Combined rate: \(\frac{1}{10} + \frac{1}{15} = \frac{3}{30} + \frac{2}{30} = \frac{5}{30} = \frac{1}{6}\) job/hour
In 6 hours: \(\frac{1}{6} \times 6 = 1\) complete job ✓
Combined rate: \(\frac{1}{6}\) job/hour
Second painter rate: \(\frac{1}{15}\) job/hour
Time for second painter alone: 15 hours
The second painter would take 15 hours to paint the house alone.
• Work Rate Formula: Rate = \(\frac{\text{part of job}}{\text{time}}\)
• Combined Rates: When working together, add individual rates
• Verification: Check that combined work equals the total job
Concentration Problem: Problems involving the changing concentration of substances in a solution over time, typically modeled by differential equations that result in rational functions.
Let \(S(t)\) = amount of salt (in kg) in the tank after \(t\) minutes
Initial amount: \(S(0) = 10\) kg
Tank volume: constant at 50 L (same inflow and outflow rates)
Rate of change of salt = Rate in - Rate out
Rate in = 0 (pure water entering)
Rate out = concentration × flow rate = \(\frac{S(t)}{50} \times 3 = \frac{3S(t)}{50}\)
So: \(\frac{dS}{dt} = 0 - \frac{3S(t)}{50} = -\frac{3S(t)}{50}\)
This is a separable differential equation: \(\frac{dS}{S} = -\frac{3}{50}dt\)
Integrating both sides: \(\ln|S| = -\frac{3t}{50} + C\)
Exponentiating: \(S(t) = e^C \cdot e^{-3t/50} = A \cdot e^{-3t/50}\)
At \(t = 0\): \(S(0) = 10 = A \cdot e^0 = A\)
Therefore: \(S(t) = 10e^{-3t/50}\)
The exponential decay shows that salt concentration decreases over time
As \(t \to \infty\), \(S(t) \to 0\), meaning the tank eventually becomes pure water
Initial: \(S(0) = 10\) kg
After 10 min: \(S(10) = 10e^{-0.6} \approx 5.49\) kg
As \(t \to \infty\): \(S(t) \to 0\)
The amount of salt in the tank after \(t\) minutes is given by \(S(t) = 10e^{-3t/50}\) kg.
• Rate Equation: Rate of change = Rate in - Rate out
• Concentration: Concentration = \(\frac{\text{amount of solute}}{\text{volume of solution}}\)
• Exponential Decay: Characteristic of first-order linear differential equations
Average Cost Function: The total cost divided by the number of units produced, often expressed as a rational function where the denominator represents the quantity produced.
Fixed costs: $2000 per month (constant regardless of production)
Variable costs: $15 per item × x items = $15x
Total cost: \(C(x) = 2000 + 15x\)
Average cost per item = \(\frac{\text{total cost}}{\text{number of items}}\)
\(\overline{C}(x) = \frac{2000 + 15x}{x} = \frac{2000}{x} + 15\)
The function \(\overline{C}(x) = \frac{2000}{x} + 15\) shows that:
- As \(x\) increases, the term \(\frac{2000}{x}\) decreases
- The average cost approaches $15 as \(x\) becomes large
- The minimum average cost approaches $15 but is always greater than $15
\(\frac{2000}{x} + 15 < 20\)
\(\frac{2000}{x} < 5\)
\(2000 < 5x\)
\(x > 400\)
Since \(x\) must be a whole number, the company needs to produce at least 401 items
Verification: At \(x = 400\): \(\overline{C}(400) = \frac{2000}{400} + 15 = 5 + 15 = 20\)
At \(x = 401\): \(\overline{C}(401) = \frac{2000}{401} + 15 \approx 4.99 + 15 = 19.99 < 20\) ✓
Minimum items for cost < $20: 401 items
Asymptotic behavior: Approaches $15 as \(x \to \infty\)
Domain: \(x > 0\)
The average cost per item is \(\overline{C}(x) = \frac{2000}{x} + 15\). The company needs to produce at least 401 items to keep the average cost below $20 per item.
• Average Cost: Total cost divided by quantity produced
• Cost Structure: Total cost = Fixed cost + Variable cost
• Asymptotic Behavior: Long-term behavior of rational functions
Optimization Problem: Problems seeking to maximize or minimize a quantity subject to constraints, often resulting in rational functions when the constraint involves ratios or rates.
Let \(x\) = length of the side parallel to the river
Let \(y\) = width of the sides perpendicular to the river
Since no fencing is needed along the river, the constraint is: \(x + 2y = 400\)
Area: \(A = xy\)
From constraint: \(x + 2y = 400 \Rightarrow x = 400 - 2y\)
Substituting: \(A = (400 - 2y)y = 400y - 2y^2\)
Alternatively, solving for \(y\): \(y = \frac{400 - x}{2}\)
So: \(A = x \cdot \frac{400 - x}{2} = \frac{400x - x^2}{2}\)
To maximize \(A(x) = \frac{400x - x^2}{2}\), take the derivative:
\(A'(x) = \frac{400 - 2x}{2} = 200 - x\)
Setting \(A'(x) = 0\): \(200 - x = 0 \Rightarrow x = 200\)
When \(x = 200\): \(y = \frac{400 - 200}{2} = \frac{200}{2} = 100\)
Maximum area: \(A = 200 \times 100 = 20,000\) square meters
Second derivative: \(A''(x) = -1 < 0\), confirming this is a maximum
Also check boundaries: At \(x = 0\), \(A = 0\); At \(x = 400\), \(A = 0\)
Maximum area: 20,000 m²
Area function: \(A(x) = \frac{400x - x^2}{2}\)
Domain: \(0 < x < 400\)
The field should be 200 meters parallel to the river and 100 meters perpendicular to the river, giving a maximum area of 20,000 square meters.
• Optimization: Use derivatives to find maximum/minimum values
• Constraint Equations: Express one variable in terms of another
• Second Derivative Test: Confirm maximum or minimum
Efficacy/Ratio Function: Functions that express ratios, percentages, or efficiencies, often taking the form of rational functions where the numerator represents the beneficial outcome and the denominator represents the total input or effort.
The function \(E(t) = \frac{100t}{t^2 + 25}\) models efficiency as a percentage
At \(t = 0\): \(E(0) = 0\%\) (machine not running)
As \(t \to \infty\): \(E(t) \to 0\%\) (efficiency decreases with excessive runtime)
If \(E(t) = \frac{f(t)}{g(t)} = \frac{100t}{t^2 + 25}\), then:
\(E'(t) = \frac{g(t)f'(t) - f(t)g'(t)}{[g(t)]^2}\)
Where \(f(t) = 100t\), \(f'(t) = 100\), \(g(t) = t^2 + 25\), \(g'(t) = 2t\)
\(E'(t) = \frac{(t^2 + 25)(100) - (100t)(2t)}{(t^2 + 25)^2} = \frac{100t^2 + 2500 - 200t^2}{(t^2 + 25)^2} = \frac{2500 - 100t^2}{(t^2 + 25)^2}\)
\(E'(t) = \frac{100(25 - t^2)}{(t^2 + 25)^2}\)
Set \(E'(t) = 0\): \(\frac{100(25 - t^2)}{(t^2 + 25)^2} = 0\)
This occurs when \(25 - t^2 = 0\)
So \(t^2 = 25\), which gives \(t = 5\) (since time must be positive)
For \(0 < t < 5\): \(25 - t^2 > 0\), so \(E'(t) > 0\) (increasing)
For \(t > 5\): \(25 - t^2 < 0\), so \(E'(t) < 0\) (decreasing)
Therefore, \(t = 5\) gives a maximum efficiency
\(E(5) = \frac{100 \times 5}{5^2 + 25} = \frac{500}{25 + 25} = \frac{500}{50} = 10\)
Maximum efficiency is 10%
Maximum efficiency value: 10%
Efficiency function: \(E(t) = \frac{100t}{t^2 + 25}\)
Behavior: Increases 0→5, Decreases 5→∞
The machine achieves maximum efficiency of 10% after operating for 5 hours.
• Quotient Rule: For differentiating rational functions
• Optimization: Critical points occur where derivative equals zero
• Behavior Analysis: Understand function behavior at extremes
Rational Function: A function that can be expressed as the quotient of two polynomials, \(f(x) = \frac{P(x)}{Q(x)}\), where \(Q(x) \neq 0\).
Rate Problems: Problems involving quantities that change over time, often expressed as ratios of distance/time, work/time, or other related measures.
Average/Mean Value: A measure calculated by dividing a total by the number of units, often resulting in rational functions.
- Read and interpret: Understand the real-world scenario and identify what is being asked
- Define variables: Assign variables to unknown quantities
- Set up equations: Translate the relationships into mathematical expressions
- Formulate rational function: Express the desired quantity as a rational function
- Solve mathematically: Use algebraic techniques, calculus, or other mathematical tools
- Interpret results: Translate mathematical results back to the real-world context
- Verify reasonableness: Check if the answer makes sense in the given context
• Work Rate Addition: When people/machines work together, their rates add: \(R_{total} = R_1 + R_2 + ... + R_n\)
• Concentration Formula: \(C = \frac{\text{amount of substance}}{\text{total volume}}\)
• Average Calculation: Average = \(\frac{\text{total}}{\text{quantity}}\)
• Optimization: Find extrema using derivatives: \(f'(x) = 0\) for critical points
Questions & Answers
Question: Why do we add rates instead of times when solving work rate problems? It seems counterintuitive.
Answer: This is a common source of confusion! Think about it this way:
Rate = Work Done per Unit Time
If Person A completes a job in 4 hours, their rate is \(\frac{1}{4}\) of the job per hour.
If Person B completes the same job in 6 hours, their rate is \(\frac{1}{6}\) of the job per hour.
When working together, in one hour they complete \(\frac{1}{4} + \frac{1}{6} = \frac{5}{12}\) of the job.
It wouldn't make sense to add the times (4 + 6 = 10 hours) because working together should be faster, not slower!
The key insight is that rates are additive because they represent simultaneous progress toward the same goal.
Time is not additive because it represents duration, not progress rate.
Question: In concentration problems, why do we use differential equations? Can't we just use regular algebra?
Answer: Great question! Differential equations are necessary when the concentration is changing over time:
- Regular algebra works when we have a static situation (fixed amounts)
- Differential equations are needed when we're modeling how something changes over time
In the concentration problem, the amount of salt is continuously changing as pure water flows in and the mixture flows out. We need to model the rate of change: \(\frac{dS}{dt}\).
However, many of these problems result in exponential functions that can be analyzed using precalculus techniques, as we saw in the example.
The differential equation gives us the underlying model, but we often solve it using precalculus methods like separation of variables.
In simpler cases where the system reaches equilibrium instantly, regular algebra would suffice.
Question: How do I know when a word problem will result in a rational function versus some other type of function?
Answer: Look for these key phrases and situations that typically lead to rational functions:
- "Average" or "per": Average cost, average speed, rate per unit
- Ratios or proportions: One quantity divided by another
- Work rate problems: Jobs completed per unit time
- Concentration problems: Amount per unit volume
- Optimization with constraints: Maximizing area with fixed perimeter
- Combining rates: Mixing solutions, combining workers
For example:
- "Average cost per item" → Rational function: \(\frac{\text{total cost}}{\text{number of items}}\)
- "Speed is distance divided by time" → Rational function if one variable changes
- "Combined work rate" → Rational function: \(\frac{1}{\text{time}_1} + \frac{1}{\text{time}_2}\)
The common thread is division of one quantity by another, especially when one of the quantities is variable.