Compound Interest: Interest calculated on the initial principal and also on the accumulated interest of previous periods, forming a geometric sequence.
- Identify initial amount, interest rate, and time period
- Recognize the geometric pattern in compound interest
- Apply the compound interest formula: \(A = P(1 + r)^t\)
- Calculate the final amount and derived quantities
- Verify the result using simpler calculations
Principal (P) = $1000
Annual interest rate (r) = 5% = 0.05
Time (t) = 10 years
Compounding frequency = annually (once per year)
Year 1: \(A_1 = 1000 \cdot (1.05)^1 = 1050\)
Year 2: \(A_2 = 1000 \cdot (1.05)^2 = 1102.50\)
Year 3: \(A_3 = 1000 \cdot (1.05)^3 = 1157.63\)
Year n: \(A_n = 1000 \cdot (1.05)^n\)
For annual compounding: \(A = P(1 + r)^t\)
Where A = final amount, P = principal, r = rate, t = time
\(A = 1000 \cdot (1 + 0.05)^{10}\)
\(A = 1000 \cdot (1.05)^{10}\)
\(A = 1000 \cdot 1.62889\)
\(A = 1628.89\)
Interest = Final amount - Principal
Interest = \$1628.89 - \$1000 = \$628.89
Interest rate: 5% annually
Time: 10 years
Final balance: $1628.89
Total interest: $628.89
After 10 years, the balance will be $1628.89, with a total interest earned of $628.89.
• Compound Interest: \(A = P(1 + r)^t\)
• Geometric Growth: Each year multiplies by (1 + r)
• Interest Calculation: Interest = A - P
Exponential Growth Model: A model where the rate of increase of a quantity is proportional to the current amount, following the formula \(N(t) = N_0 \cdot a^{t/k}\) where \(N_0\) is the initial amount, \(a\) is the growth factor, and \(k\) is the doubling/tripling time.
Initial population: \(N_0 = 500\) bacteria
Doubling time: 3 hours
Since the population doubles every 3 hours, the model is:
\(N(t) = 500 \cdot 2^{t/3}\) where t is time in hours
At \(t = 24\) hours:
\(N(24) = 500 \cdot 2^{24/3}\)
\(N(24) = 500 \cdot 2^8\)
\(N(24) = 500 \cdot 256\)
\(N(24) = 128,000\) bacteria
Set \(N(t) = 1,000,000\):
\(1,000,000 = 500 \cdot 2^{t/3}\)
\(\frac{1,000,000}{500} = 2^{t/3}\)
\(2000 = 2^{t/3}\)
Take the natural logarithm of both sides:
\(\ln(2000) = \ln(2^{t/3})\)
\(\ln(2000) = \frac{t}{3} \cdot \ln(2)\)
\(7.601 = \frac{t}{3} \cdot 0.693\)
\(7.601 = 0.231t\)
\(t = \frac{7.601}{0.231} \approx 32.9\) hours
Check: \(N(32.9) = 500 \cdot 2^{32.9/3} = 500 \cdot 2^{10.97} \approx 500 \cdot 2000 = 1,000,000\) ✓
Doubling time: 3 hours
Growth model: \(N(t) = 500 \cdot 2^{t/3}\)
Population after 24 hours: 128,000
Time to reach 1 million: ~32.9 hours
After 24 hours, there will be 128,000 bacteria. The population will reach 1 million after approximately 32.9 hours.
• Exponential Growth: \(N(t) = N_0 \cdot a^{t/k}\)
• Doubling Model: Use base 2 with time divided by doubling period
• Logarithmic Solution: Use logs to solve for time in exponential equations
Geometric Sequence in Finance: When a quantity increases by a fixed percentage each period, it forms a geometric sequence with ratio \(r = 1 + \text{percentage rate}\).
First term: \(a_1 = 45,000\) (initial salary)
Common ratio: \(r = 1 + 0.03 = 1.03\) (103% of previous year)
General term: \(a_n = 45000 \cdot (1.03)^{n-1}\)
For the 15th year (\(n = 15\)):
\(a_{15} = 45000 \cdot (1.03)^{15-1}\)
\(a_{15} = 45000 \cdot (1.03)^{14}\)
\(a_{15} = 45000 \cdot 1.513\)
\(a_{15} = 68,085\)
This is the sum of the first 15 terms of a geometric series:
\(S_n = a_1 \cdot \frac{r^n - 1}{r - 1}\)
\(S_{15} = 45000 \cdot \frac{(1.03)^{15} - 1}{1.03 - 1}\)
\(S_{15} = 45000 \cdot \frac{1.558 - 1}{0.03}\)
\(S_{15} = 45000 \cdot \frac{0.558}{0.03}\)
\(S_{15} = 45000 \cdot 18.6\)
\(S_{15} = 837,000\)
First few terms: 45000, 46350, 47740.50, 49172.72, ...
Sum of first 5 terms ≈ 237,633 (using geometric series formula)
This confirms our approach is correct
Common ratio: 1.03
15th year salary: $68,085
Total 15-year earnings: $837,000
Series formula: \(S_n = a_1 \cdot \frac{r^n - 1}{r - 1}\)
In the 15th year, the salary will be $68,085. The total earnings over the first 15 years will be $837,000.
• Geometric Sequence: \(a_n = a_1 \cdot r^{n-1}\)
• Geometric Series: \(S_n = a_1 \cdot \frac{r^n - 1}{r - 1}\)
• Percentage Growth: \(r = 1 + \text{rate as decimal}\)
Exponential Decay Model: A model where the value of an asset decreases by a fixed percentage each period, following the formula \(V(t) = V_0 \cdot (1 - r)^t\) where \(V_0\) is the initial value and \(r\) is the depreciation rate.
Initial value: \(V_0 = \$20,000\)
Depreciation rate: 15% per year = 0.15
Remaining value each year: \(1 - 0.15 = 0.85\)
Model: \(V(t) = 20000 \cdot (0.85)^t\)
At \(t = 8\) years:
\(V(8) = 20000 \cdot (0.85)^8\)
\(V(8) = 20000 \cdot 0.2725\)
\(V(8) = 5450\)
Set \(V(t) = 5000\):
\(5000 = 20000 \cdot (0.85)^t\)
\(\frac{5000}{20000} = (0.85)^t\)
\(0.25 = (0.85)^t\)
Take the natural logarithm of both sides:
\(\ln(0.25) = \ln((0.85)^t)\)
\(\ln(0.25) = t \cdot \ln(0.85)\)
\(-1.386 = t \cdot (-0.163)\)
\(t = \frac{-1.386}{-0.163} \approx 8.5\) years
Since we need the value to be below $5,000, we round up to 9 years.
At 8 years: $5,450 (still above $5,000)
At 9 years: \(V(9) = 20000 \cdot (0.85)^9 = 20000 \cdot 0.2315 = 4630\) (below $5,000)
Depreciation rate: 15% annually
Decay model: \(V(t) = 20000 \cdot (0.85)^t\)
Value after 8 years: $5,450
Value below $5,000: After 9 years
After 8 years, the equipment will be worth $5,450. Its value will fall below $5,000 after 9 years.
• Exponential Decay: \(V(t) = V_0 \cdot (1 - r)^t\)
• Depreciation: Value decreases by a fixed percentage each period
• Logarithmic Solution: Use logs to solve for time in exponential equations
Recursive Drug Elimination Model: A model where a fixed percentage of a substance is removed at regular intervals, followed by the addition of a fixed amount, creating a recursive sequence that often approaches a steady state.
Let \(A_n\) be the amount of drug after the nth dose
Each hour: 70% remains, then 200mg is added
Recurrence relation: \(A_n = 0.7 \cdot A_{n-1} + 200\)
Initial condition: \(A_0 = 0\) (before first dose)
After 1st dose: \(A_1 = 0.7 \cdot 0 + 200 = 200\) mg
After 2nd dose: \(A_2 = 0.7 \cdot 200 + 200 = 140 + 200 = 340\) mg
After 3rd dose: \(A_3 = 0.7 \cdot 340 + 200 = 238 + 200 = 438\) mg
After 4th dose: \(A_4 = 0.7 \cdot 438 + 200 = 306.6 + 200 = 506.6\) mg
After 5th dose: \(A_5 = 0.7 \cdot 506.6 + 200 = 354.62 + 200 = 554.62\) mg
At steady state: \(A_n = A_{n-1} = S\) (stable level)
So: \(S = 0.7S + 200\)
\(S - 0.7S = 200\)
\(0.3S = 200\)
\(S = \frac{200}{0.3} = 666.67\) mg
If 666.67 mg is present:
After elimination: \(0.7 \times 666.67 = 466.67\) mg
After adding 200 mg: \(466.67 + 200 = 666.67\) mg
This confirms the steady state is maintained.
The amount after n doses can also be expressed as:
\(A_n = 200 + 200(0.7) + 200(0.7)^2 + ... + 200(0.7)^{n-1}\)
\(A_n = 200[1 + 0.7 + (0.7)^2 + ... + (0.7)^{n-1}]\)
\(A_n = 200 \cdot \frac{1-(0.7)^n}{1-0.7} = 200 \cdot \frac{1-(0.7)^n}{0.3}\)
As \(n \to \infty\), \((0.7)^n \to 0\), so \(A_{\infty} = \frac{200}{0.3} = 666.67\) mg
After 5 doses: 554.62 mg
Steady state: 666.67 mg
Series: \(A_n = 200 \cdot \frac{1-(0.7)^n}{0.3}\)
Long-term: \(A_{\infty} = \frac{200}{1-0.7} = 666.67\) mg
After 5 doses, there will be 554.62 mg of drug in the system. The long-term stable level is 666.67 mg.
• Recursive Sequence: \(A_n = r \cdot A_{n-1} + c\)
• Steady State: Solve \(S = rS + c\) for stable value
• Geometric Series: Sum of repeated additions with decay factor
Arithmetic Sequence: A sequence where each term is obtained by adding a constant value to the previous term.
Geometric Sequence: A sequence where each term is obtained by multiplying the previous term by a constant value.
Arithmetic Series: The sum of terms in an arithmetic sequence.
Geometric Series: The sum of terms in a geometric sequence.
- Read the problem carefully: Identify what is happening and what is being asked
- Identify the pattern: Determine if it's arithmetic or geometric
- Define variables: Assign symbols to unknown quantities
- Set up the model: Write the appropriate formula
- Solve mathematically: Use algebraic techniques
- Interpret results: Translate mathematical results back to the real world
- Verify reasonableness: Check if the answer makes sense
• Compound Interest: \(A = P(1 + r)^t\) for growth, \(A = P(1 - r)^t\) for decay
• Arithmetic Sequence: \(a_n = a_1 + (n-1)d\), \(S_n = \frac{n}{2}[2a_1 + (n-1)d]\)
• Geometric Sequence: \(a_n = a_1 \cdot r^{n-1}\), \(S_n = a_1 \cdot \frac{r^n - 1}{r - 1}\)
• Infinite Series: \(S_{\infty} = \frac{a_1}{1-r}\) when \(|r| < 1\)
Question: How do I know whether to use arithmetic or geometric sequences for real-world problems?
Answer: The key is to identify the pattern in how the quantity changes:
Arithmetic Sequences: Use when the quantity changes by a constant amount each period.
- Keywords: "increases by $50", "decreases by 10 units", "adds 5 each day"
- Example: A salary that increases by $1000 each year
- Pattern: 30000, 31000, 32000, 33000, ... (add 1000 each time)
Geometric Sequences: Use when the quantity changes by a constant percentage or factor each period.
- Keywords: "increases by 5%", "triples every day", "halves each hour", "multiplied by 2"
- Example: An investment that grows by 8% annually
- Pattern: 1000, 1080, 1166.40, 1259.71, ... (multiply by 1.08 each time)
In arithmetic sequences, the difference between consecutive terms is constant. In geometric sequences, the ratio between consecutive terms is constant.
Question: Why do we use the formula \(A = P(1 + r)^t\) for compound interest?
Answer: The compound interest formula arises from the geometric growth pattern:
Year 1: Amount = \(P + P \cdot r = P(1 + r)\)
Year 2: Amount = \(P(1+r) + P(1+r) \cdot r = P(1+r)[1+r] = P(1+r)^2\)
Year 3: Amount = \(P(1+r)^2 + P(1+r)^2 \cdot r = P(1+r)^2[1+r] = P(1+r)^3\)
Year t: Amount = \(P(1+r)^t\)
Each year, the entire amount (including previously earned interest) earns interest, creating the exponential growth pattern characteristic of geometric sequences.
For example, with P=$1000, r=0.05 (5%), after 3 years: \(A = 1000(1.05)^3 = 1000(1.157625) = 1157.63\)
Question: What's the difference between simple interest and compound interest?
Answer: The key difference is how interest is calculated:
Simple Interest: Interest is calculated only on the original principal amount.
- Formula: \(I = P \cdot r \cdot t\)
- Total amount: \(A = P + I = P(1 + rt)\)
- Linear growth: Same amount of interest earned each year
- Example: $1000 at 5% for 3 years: \(I = 1000 \cdot 0.05 \cdot 3 = 150\), Total = $1150
Compound Interest: Interest is calculated on the principal plus any previously earned interest.
- Formula: \(A = P(1 + r)^t\)
- Exponential growth: More interest earned each year as the base amount increases
- Example: $1000 at 5% for 3 years: \(A = 1000(1.05)^3 = 1157.63\)
Over longer periods, compound interest results in significantly higher returns due to the exponential nature of growth.