Geometric sequence: A sequence where each term after the first is found by multiplying the previous term by a constant called the common ratio (r). The general form is: \(a_n = a_1 \cdot r^{n-1}\).
- Identify the first term (\(a_1\))
- Find the common ratio (r) by dividing any term by the previous term
- Identify which term you're looking for (n)
- Apply the formula: \(a_n = a_1 \cdot r^{n-1}\)
- Calculate the result
The first term is \(a_1 = 3\)
Divide any term by the previous term: \(r = \frac{6}{3} = 2\)
Verify: \(\frac{12}{6} = 2\), \(\frac{24}{12} = 2\)
Using \(a_n = a_1 \cdot r^{n-1}\) with \(n = 8\)
\(a_8 = 3 \cdot 2^{8-1} = 3 \cdot 2^7\)
\(2^7 = 128\)
\(a_8 = 3 \times 128 = 384\)
The 8th term of the sequence is 384.
• Geometric sequence formula: \(a_n = a_1 \cdot r^{n-1}\)
• Common ratio: \(r = \frac{a_{n+1}}{a_n}\) for any n
• Exponentiation: Calculate the power before multiplication
Finite geometric series: The sum of the first n terms of a geometric sequence. The formula is: \(S_n = a_1 \cdot \frac{1-r^n}{1-r}\) where \(a_1\) is the first term, r is the common ratio, and n is the number of terms.
First term (\(a_1\)) = 5
Common ratio (\(r\)) = 15/5 = 3
Number of terms (\(n\)) = 6
\(S_n = a_1 \cdot \frac{1-r^n}{1-r}\)
\(S_6 = 5 \cdot \frac{1-3^6}{1-3}\)
\(3^6 = 729\)
\(S_6 = 5 \cdot \frac{1-729}{1-3} = 5 \cdot \frac{-728}{-2} = 5 \cdot 364 = 1820\)
The sum of the first 6 terms is 1820.
• Finite geometric series: \(S_n = a_1 \cdot \frac{1-r^n}{1-r}\)
• Common ratio: \(r = \frac{a_{n+1}}{a_n}\)
• Sign handling: Dividing two negative numbers gives a positive result
Infinite geometric series: A geometric series with infinitely many terms. The sum converges to a finite value if and only if the absolute value of the common ratio is less than 1 (\(|r| < 1\)). The formula is: \(S = \frac{a_1}{1-r}\).
First term (\(a_1\)) = 8
Common ratio (\(r\)) = 4/8 = 1/2
For infinite series to converge: \(|r| < 1\)
\(|1/2| = 1/2 < 1\) ✓
\(S = \frac{a_1}{1-r} = \frac{8}{1-\frac{1}{2}}\)
\(1 - \frac{1}{2} = \frac{2}{2} - \frac{1}{2} = \frac{1}{2}\)
\(S = \frac{8}{\frac{1}{2}} = 8 \times \frac{2}{1} = 16\)
The sum of the infinite series is 16.
• Infinite geometric series: \(S = \frac{a_1}{1-r}\) (when \(|r| < 1\))
• Convergence condition: Series converges if and only if \(|r| < 1\)
• Division by fraction: \(\frac{a}{\frac{b}{c}} = a \times \frac{c}{b}\)
Constant multiplier between consecutive terms
\(|r| < 1\): Decay
\(|r| \geq 1\): Diverges
Each term equals previous term times ratio
Direct calculation of any term
Sum of first n terms
Geometric sequence: A sequence of numbers where each term after the first is found by multiplying the previous term by a fixed, non-zero number called the common ratio.
Common ratio (r): The constant factor between consecutive terms in a geometric sequence, calculated as the quotient of any term and the previous term.
Geometric series: The sum of the terms in a geometric sequence.
Convergence: A property of infinite series where the partial sums approach a finite limit as the number of terms increases indefinitely.
- Identify the sequence type: Confirm it's geometric by checking if the ratio between consecutive terms is constant
- Find the first term and common ratio: Identify \(a_1\) and calculate r
- Determine what's being asked: Find a specific term, sum of terms, or other property
- Select the appropriate formula: Use explicit formula, finite sum, or infinite sum as needed
- Substitute values and calculate: Apply the formula with the known values
- Verify the solution: Check if the answer makes sense in context
• nth term: \(a_n = a_1 \cdot r^{n-1}\)
• Finite sum: \(S_n = a_1 \cdot \frac{1-r^n}{1-r}\) (when \(r \neq 1\))
• Infinite sum: \(S = \frac{a_1}{1-r}\) (when \(|r| < 1\))
• Common ratio: \(r = \frac{a_{n+1}}{a_n}\)
• Recursive formula: \(a_n = a_{n-1} \cdot r\)
Geometric sequence: A sequence where each term is obtained by multiplying the previous term by a constant value called the common ratio (r). The general form is: \(a_1, a_1r, a_1r^2, a_1r^3, ...\)
Common ratio (r): The constant multiplier in a geometric sequence, calculated as \(r = \frac{a_{n+1}}{a_n}\) for any valid n. It determines the sequence's behavior.
Geometric series: The sum of the terms in a geometric sequence. It can be finite (sum of first n terms) or infinite.
Convergence: An infinite series converges if its partial sums approach a finite limit. For geometric series, this happens only when |r| < 1.
• Constant ratio property: In a geometric sequence, the ratio between any two consecutive terms is always the same value r.
• Explicit formula: The nth term can be calculated directly: \(a_n = a_1 \cdot r^{n-1}\).
• Recursive formula: Each term is calculated from the previous term: \(a_n = a_{n-1} \cdot r\).
• Convergence condition: Infinite geometric series converge only if |r| < 1; otherwise they diverge.
• Behavior based on r: If |r| > 1, terms grow without bound; if |r| < 1, terms approach 0; if r = 1, all terms equal the first term.
- Sequence identification: Check if the ratio between consecutive terms is constant.
- Parameter calculation: Find the first term (a₁) and common ratio (r).
- Term calculation: Use \(a_n = a_1 \cdot r^{n-1}\) to find any specific term.
- Finite sum calculation: Use \(S_n = a_1 \cdot \frac{1-r^n}{1-r}\) for first n terms.
- Infinite sum calculation: Use \(S = \frac{a_1}{1-r}\) only if |r| < 1.
- Verification: Check that your solution satisfies the original conditions.
Simple example: Sequence 2, 6, 18, 54, ... has a₁ = 2 and r = 3. The 5th term is \(a_5 = 2 \cdot 3^4 = 2 \cdot 81 = 162\).
Intermediate example: Sequence 16, -8, 4, -2, ... has a₁ = 16 and r = -1/2. The 4th term is \(a_4 = 16 \cdot (-1/2)^3 = 16 \cdot (-1/8) = -2\).
Advanced example: The infinite series 1 + 1/2 + 1/4 + 1/8 + ... has a₁ = 1 and r = 1/2. Since |r| = 1/2 < 1, the sum is \(S = \frac{1}{1-1/2} = \frac{1}{1/2} = 2\).
Question: How can I tell if a sequence is geometric or arithmetic?
Answer: To distinguish between geometric and arithmetic sequences:
- Arithmetic sequence: Check if the difference between consecutive terms is constant. If \(a_2 - a_1 = a_3 - a_2 = a_4 - a_3\), it's arithmetic.
- Geometric sequence: Check if the ratio between consecutive terms is constant. If \(\frac{a_2}{a_1} = \frac{a_3}{a_2} = \frac{a_4}{a_3}\), it's geometric.
For example: 2, 5, 8, 11... has constant difference 3 (arithmetic), while 2, 6, 18, 54... has constant ratio 3 (geometric).
Question: Why does the infinite geometric series only converge when |r| < 1? What happens if |r| ≥ 1?
Answer: The convergence condition relates to the behavior of the terms:
- When |r| < 1: Each successive term becomes smaller (approaches 0), so the sum approaches a finite limit.
- When |r| > 1: Each successive term becomes larger, so the sum grows without bound (diverges to infinity).
- When |r| = 1: Terms don't change in magnitude, so the sum continues to grow with more terms (diverges).
The series can only converge if the terms eventually become negligible, which only happens when |r| < 1.
Question: What happens when the common ratio is negative? Does the formula still work?
Answer: Yes, the formulas work perfectly with negative ratios! When r is negative:
- The terms alternate in sign (positive, negative, positive, negative, ...)
- The nth term formula \(a_n = a_1 \cdot r^{n-1}\) still applies
- The sum formulas work as long as |r| < 1 for infinite series
For example, in the sequence 8, -4, 2, -1, ..., r = -1/2. The 5th term is \(a_5 = 8 \cdot (-1/2)^4 = 8 \cdot (1/16) = 1/2\).