Angle of elevation: The angle between the horizontal and the line of sight to an object above the horizontal.
- Draw a diagram showing the situation
- Set up equations using tangent ratios
- Solve the system of equations
- Find the height of the building
Let the building height be h meters. From the first position (100m from building), angle of elevation is 35°. From the second position (70m from building), angle of elevation is 50°.
From first position: tan(35°) = h/100
From second position: tan(50°) = h/70
Actually, we need to use both positions simultaneously. Let d be the final distance from the building.
Then: tan(35°) = h/(d + 30) and tan(50°) = h/d
From the second equation: h = d·tan(50°)
Substitute into the first equation: d·tan(50°) = (d + 30)·tan(35°)
d·tan(50°) = d·tan(35°) + 30·tan(35°)
d(tan(50°) - tan(35°)) = 30·tan(35°)
d = (30·tan(35°))/(tan(50°) - tan(35°))
tan(35°) ≈ 0.7002, tan(50°) ≈ 1.1918
d = (30 × 0.7002)/(1.1918 - 0.7002) = 21.006/0.4916 ≈ 42.73m
h = d·tan(50°) = 42.73 × 1.1918 ≈ 50.93m
Let me verify: h = (d + 30)·tan(35°) = (42.73 + 30) × 0.7002 = 72.73 × 0.7002 ≈ 50.93m ✓
The height of the building is approximately 50.93 meters
• Angle of elevation: Always measured from horizontal upward
• Tangent ratio: tan(θ) = opposite/adjacent
• System of equations: Use multiple measurements to create solvable system
Angle of depression: The angle between the horizontal and the line of sight to an object below the horizontal.
The vertical leg represents the altitude (10,000 ft), the horizontal leg is the distance from the airport, and the hypotenuse is the flight path.
The angle of descent is 3°, which is the angle between the horizontal and the flight path.
tan(3°) = opposite/adjacent = altitude/distance
tan(3°) = 10,000/distance
distance = 10,000/tan(3°)
tan(3°) ≈ 0.0524
distance = 10,000/0.0524 ≈ 190,809 ft
190,809 ft ÷ 5280 ft/mile ≈ 36.14 miles
The pilot should begin descent approximately 190,809 feet (about 36.14 miles) from the airport
• Angle of depression: Measured from horizontal downward
• Tangent ratio: tan(θ) = opposite/adjacent
• Unit conversion: Convert between feet and miles when necessary
Trigonometric function model: Functions of the form f(t) = A sin(Bt + C) + D, where A is amplitude, period is 2π/B, and D is vertical shift.
h(t) = 3sin(πt/6) + 2 is in the form A sin(Bt) + D
Amplitude A = 3, B = π/6, Vertical shift D = 2
The sine function oscillates between -1 and 1
Maximum occurs when sin(πt/6) = 1
Maximum height = A + D = 3 + 2 = 5 feet
Minimum occurs when sin(πt/6) = -1
Minimum height = -A + D = -3 + 2 = -1 foot
Period = 2π/B = 2π/(π/6) = 2π × 6/π = 12 seconds
The wave height oscillates between -1 foot and 5 feet
It takes 12 seconds to complete one full cycle
Maximum wave height: 5 feet, Minimum wave height: -1 foot, Time between consecutive peaks: 12 seconds
• Sinusoidal function: f(t) = A sin(Bt + C) + D
• Amplitude: Maximum displacement from midline (|A|)
• Period: Time for one complete cycle (2π/B)
Bearing: Direction measured clockwise from north. N40°E means 40° east of north.
N40°E = 90° - 40° = 50° from positive x-axis (east)
S60°E = 180° - 60° = 120° from positive x-axis (east)
After sailing 25 km at 50°: x₁ = 25cos(50°), y₁ = 25sin(50°)
x₁ = 25 × 0.6428 ≈ 16.07 km
y₁ = 25 × 0.7660 ≈ 19.15 km
From point (16.07, 19.15), sail 18 km at 120°:
Δx = 18cos(120°) = 18 × (-0.5) = -9 km
Δy = 18sin(120°) = 18 × 0.8660 ≈ 15.59 km
Final position: x₂ = 16.07 - 9 = 7.07 km, y₂ = 19.15 + 15.59 = 34.74 km
Distance = √(x₂² + y₂²) = √(7.07² + 34.74²) = √(49.98 + 1206.87) = √1256.85 ≈ 35.45 km
θ = arctan(y₂/x₂) = arctan(34.74/7.07) = arctan(4.91) ≈ 78.5°
This is 78.5° from east, or 90° - 78.5° = 11.5° from north
So the bearing is N11.5°E
The ship is approximately 35.45 km from its starting point on a bearing of N11.5°E
• Bearing conversion: Convert to standard mathematical angles
• Component resolution: Break vectors into x and y components
• Vector addition: Add displacements to find final position
Angle of incidence: The angle between the incoming ray and the normal (perpendicular) to the surface.
E₁ = 100cos(15°)
cos(15°) ≈ 0.9659
E₁ = 100 × 0.9659 = 96.59%
E₂ = 100cos(45°)
cos(45°) = √2/2 ≈ 0.7071
E₂ = 100 × 0.7071 = 70.71%
Absolute decrease = E₁ - E₂ = 96.59% - 70.71% = 25.88%
Percent decrease = (Absolute decrease / Initial efficiency) × 100%
= (25.88 / 96.59) × 100% ≈ 26.8%
Starting at 96.59% and ending at 70.71%
Change: (96.59 - 70.71)/96.59 × 100% = 25.88/96.59 × 100% ≈ 26.8%
The efficiency decreases by approximately 26.8% when the angle changes from 15° to 45°
• Percent change: (New - Old)/Old × 100%
• Cosine function: Efficiency decreases as angle increases
• Angle of incidence: Critical for optimal energy collection
Angle of elevation: The angle between the horizontal and the line of sight to an object above the horizontal.
Angle of depression: The angle between the horizontal and the line of sight to an object below the horizontal.
Bearing: Direction measured clockwise from north.
Sinusoidal function: Function of the form f(t) = A sin(Bt + C) + D.
- Understand the problem: Read carefully and identify what is being asked.
- Draw a diagram: Sketch the situation to visualize the problem.
- Identify known and unknown values: List all given information.
- Select appropriate formulas: Choose trigonometric ratios or models.
- Solve the problem: Perform calculations and solve for unknowns.
- Check reasonableness: Verify that the answer makes sense in context.
• Basic ratios: sin(θ) = opp/hyp, cos(θ) = adj/hyp, tan(θ) = opp/adj
• Sinusoidal function: f(t) = A sin(Bt + C) + D
• Period: T = 2π/B
• Bearing conversions: Nθ°E = 90° - θ, Sθ°E = 180° - θ
• Vector components: x = r cos(θ), y = r sin(θ)
Comprehensive Summary: Applications in Problem Solving
This section provides a detailed overview of trigonometric applications in problem solving, including definitions, rules, methods, examples, and tips for mastering real-world scenarios.
Definitions & Keywords
Angle of Elevation: The angle between the horizontal and the line of sight to an object above the horizontal.
Angle of Depression: The angle between the horizontal and the line of sight to an object below the horizontal.
Bearing: Direction measured clockwise from north.
Sinusoidal Function: Function of the form f(t) = A sin(Bt + C) + D.
Amplitude: Maximum displacement from the midline of a periodic function.
Period: The length of one complete cycle of a periodic function.
Phase Shift: Horizontal shift of a periodic function.
Core Rules & Principles
Tangent Ratio: tan(θ) = opposite/adjacent, commonly used for height-distance problems.
Angle Measurement: Always measure angles from the horizontal line.
Sinusoidal Parameters: In f(t) = A sin(Bt + C) + D: A=amplitude, 2π/B=period, C=phase shift, D=vertical shift.
Vector Components: x = r cos(θ), y = r sin(θ) for resolving directions.
Bearing Conversion: Nθ°E = 90° - θ, Sθ°E = 180° - θ, etc.
Percent Change: (New - Old)/Old × 100% for efficiency calculations.
Pythagorean Theorem: a² + b² = c² for finding distances in right triangles.
Step-by-Step Methods
Method 1 - Height-Distance Problems:
- Draw a right triangle representing the situation
- Identify the known angle and distance
- Select the appropriate trigonometric ratio
- Set up the equation and solve for the unknown
- Check that the answer is reasonable
Method 2 - Sinusoidal Modeling:
- Identify the amplitude (A) from the maximum variation
- Determine the period (T) from the time for one complete cycle
- Find B using B = 2π/T
- Determine the vertical shift (D) from the average value
- Identify phase shift (C) if needed
Examples & Applications
Simple Example: Finding building height using angle of elevation: tan(θ) = height/distance.
Intermediate Example: Modeling daily temperature variations with sinusoidal functions.
Advanced Example: Navigation using multiple bearings and vector resolution.
Physics Application: Simple harmonic motion and wave behavior.
Engineering Application: Signal processing and alternating current analysis.
Geometric Application: Surveying and construction measurements.
Tips & Common Pitfalls
Tips:
- Always draw a diagram to visualize the problem
- Identify which trigonometric ratio to use based on known values
- Check that your calculator is in the correct mode (degrees vs radians)
- Verify that your answer makes sense in the context of the problem
- Convert all measurements to consistent units before solving
Common Pitfalls:
- Misidentifying the angle of elevation vs depression
- Using the wrong trigonometric ratio for the given situation
- Forgetting to convert between degrees and radians
- Making calculation errors with decimals or fractions
- Not considering the practical constraints of the problem
Key Notes for Memorization
SOHCAHTOA: The fundamental memory aid for trigonometric ratios.
Angle Convention: Angles of elevation and depression are always measured from horizontal.
Sinusoidal Patterns: Remember A, B, C, D in f(t) = A sin(Bt + C) + D.
Period Formula: T = 2π/B for sinusoidal functions.
Bearing System: Bearings are measured clockwise from north (0° to 360°).
Efficiency Models: Many physical systems follow cosine relationships with angle of incidence.
Questions & Answers
Question: I'm confused about when to use angle of elevation versus angle of depression. How do I know which one to use?
Answer: The key is to look at the direction of the line of sight:
- Angle of elevation: Used when looking UP from the horizontal to see an object above you
- Angle of depression: Used when looking DOWN from the horizontal to see an object below you
Both angles are measured from the horizontal line. For example, if you're standing on the ground looking up at the top of a building, you use angle of elevation. If you're in an airplane looking down at an object on the ground, you use angle of depression.
Question: How do I convert between bearings and standard mathematical angles?
Answer: Standard mathematical angles are measured counterclockwise from the positive x-axis (east), while bearings are measured clockwise from north:
- Nθ°E: Convert to standard angle: 90° - θ
- Nθ°W: Convert to standard angle: 90° + θ
- Sθ°E: Convert to standard angle: 180° - θ
- Sθ°W: Convert to standard angle: 180° + θ
For example, N40°E converts to 90° - 40° = 50° from the positive x-axis.
Question: In sinusoidal models, how do I determine which parameters to use when modeling real-world data?
Answer: For a function of the form f(t) = A sin(Bt + C) + D:
- Amplitude (A): A = (max value - min value)/2
- Vertical shift (D): D = (max value + min value)/2
- Period (T): Time for one complete cycle; then B = 2π/T
- Phase shift (C): Determine from initial conditions or when the function reaches its maximum
For example, if temperature varies from 15°C to 25°C over 24 hours, A = (25-15)/2 = 5, D = (25+15)/2 = 20, and T = 24, so B = 2π/24 = π/12.