Graphing Sine, Cosine, and Tangent Functions: Amplitude, Period, Phase Shift, and Vertical Shift

Master graphing trigonometric functions with focus on transformations: amplitude, period, phase shift, and vertical shift for sine, cosine, and tangent functions.

Solution: Exercises 1 to 3
1 Basic Sine Function
Exercise 1
Graph the function f(x) = 2sin(x) for one complete period. Identify the amplitude, period, and key points.
Key Definitions:

Amplitude: Maximum displacement from the midline, equals |A| in A·sin(x)

Period: Length of one complete cycle, 2π for basic sin(x)

Midline: Horizontal line y = 0 for basic sine function

Solution Method:
  1. Identify the amplitude: |A| = |2| = 2
  2. Identify the period: 2π (unchanged from basic function)
  3. Identify the phase shift: 0 (no horizontal shift)
  4. Identify the vertical shift: 0 (no vertical shift)
  5. Plot key points: (0,0), (π/2,2), (π,0), (3π/2,-2), (2π,0)
Function
f(x) = 2sin(x)
Amplitude
A = 2
Period
2π
Step 1: Identify the amplitude

For f(x) = 2sin(x), the amplitude is |2| = 2

The function oscillates between -2 and 2

Step 2: Identify the period

Since there's no coefficient on x, the period remains 2π

One complete cycle occurs over the interval [0, 2π]

Step 3: Plot key points

At x = 0: f(0) = 2sin(0) = 0

At x = π/2: f(π/2) = 2sin(π/2) = 2

At x = π: f(π) = 2sin(π) = 0

At x = 3π/2: f(3π/2) = 2sin(3π/2) = -2

At x = 2π: f(2π) = 2sin(2π) = 0

Amplitude = 2, Period = 2π
Final answer:

The function f(x) = 2sin(x) has amplitude 2 and period 2π, oscillating between -2 and 2.

Applied rules:

• Amplitude formula: |A| in A·sin(x)

• Period formula: 2π/B in sin(Bx)

• Key points: Standard positions for sine function

Key Concept:

Multiplying the sine function by a constant changes only the amplitude, stretching the graph vertically by that factor.

2 Cosine with Transformations
Exercise 2
Graph the function g(x) = 3cos(2x - π) + 1 for two complete periods. Identify amplitude, period, phase shift, and vertical shift.
Key Definitions:

Phase shift: Horizontal displacement, calculated as C/B in A·cos(Bx - C) + D

Vertical shift: Upward/downward displacement, equals D in A·cos(Bx - C) + D

Transformed form: A·cos(Bx - C) + D where A affects amplitude, B affects period

Function
g(x) = 3cos(2x - π) + 1
Rewrite
3cos(2(x - π/2)) + 1
Identify
A=3, B=2, C=π, D=1
Step 1: Rewrite in standard form

g(x) = 3cos(2x - π) + 1 = 3cos(2(x - π/2)) + 1

Comparing to A·cos(B(x - h)) + k: A = 3, B = 2, h = π/2, k = 1

Step 2: Identify parameters

Amplitude: |A| = |3| = 3

Period: 2π/B = 2π/2 = π

Phase shift: h = π/2 (to the right)

Vertical shift: k = 1 (upward)

Step 3: Determine key features

The function oscillates between 1-3=-2 and 1+3=4

Each period has length π, starting at x = π/2

Standard cosine points are shifted accordingly

A = 3, P = π, Phase shift = π/2 right, V-shift = 1 up
Final answer:

The function g(x) = 3cos(2x - π) + 1 has amplitude 3, period π, phase shift π/2 right, and vertical shift 1 unit up.

Applied rules:

• General form: A·cos(B(x - h)) + k

• Amplitude: |A|

• Period: 2π/|B|

• Phase shift: h units right

• Vertical shift: k units up

Key Concept:

When rewriting A·cos(Bx - C) + D, factor out B to get A·cos(B(x - C/B)) + D. The phase shift is C/B, not C.

3 Tangent Function
Exercise 3
Graph the function h(x) = tan(3x) for one complete period. Identify the period and asymptotes.
Key Definitions:

Asymptotes: Vertical lines where the function approaches infinity, occurring at undefined points

Tangent period: π for basic tan(x), π/B for tan(Bx)

Basic tangent: tan(x) = sin(x)/cos(x), undefined when cos(x) = 0

Function
h(x) = tan(3x)
Period
π/3
Asymptotes
x = π/6 + nπ/3
Step 1: Identify the period

For tan(Bx), the period is π/B

Here, B = 3, so period = π/3

Step 2: Find the asymptotes

Tangent is undefined when its argument equals π/2 + nπ

So 3x = π/2 + nπ, which means x = π/6 + nπ/3

For one period [0, π/3]: asymptotes at x = π/6

Step 3: Plot key points

At x = 0: h(0) = tan(0) = 0

At x = π/12: h(π/12) = tan(π/4) = 1

At x = π/6: undefined (asymptote)

At x = π/4: h(π/4) = tan(3π/4) = -1

Period = π/3, Asymptotes: x = π/6 + nπ/3
Final answer:

The function h(x) = tan(3x) has period π/3 and vertical asymptotes at x = π/6 + nπ/3 for integer n.

Applied rules:

• Tangent period: π/B for tan(Bx)

• Asymptotes: Occur when argument equals π/2 + nπ

• Range: All real numbers

Key Concept:

Unlike sine and cosine, tangent has no amplitude restriction and extends infinitely in both vertical directions, but has vertical asymptotes where cosine equals zero.

Trigonometric Graphing Fundamentals
f(x) = A·sin(B(x - h)) + k
General Transformation Form
Sine Function
f(x) = A·sin(Bx - C) + D
Amplitude: |A|, Period: 2π/|B|
Cosine Function
f(x) = A·cos(Bx - C) + D
Amplitude: |A|, Period: 2π/|B|
Tangent Function
f(x) = A·tan(Bx - C) + D
Period: π/|B|, Asymptotes: Bx - C = π/2 + nπ
Comprehensive Parameter Analysis:

Amplitude (A): Controls vertical stretch/compression. The graph oscillates between -|A| and |A| for basic functions.

Period (related to B): Determines the length of one complete cycle.

  • Sine/Cosine: Period = 2π/|B|
  • Tangent: Period = π/|B|

Phase Shift (C/B): Horizontal displacement of the graph.

  • Positive C/B: Shift right
  • Negative C/B: Shift left

Vertical Shift (D): Moves the entire graph up or down by D units.

Basic Characteristics: Sine and cosine have range [-1,1], tangent has range (-∞,∞). Sine starts at 0, cosine starts at 1.
Asymptotes: Tangent has vertical asymptotes where cosine equals zero. Sine and cosine have none.
Key Points: Sine: (0,0), (π/2,1), (π,0), (3π/2,-1), (2π,0). Cosine: (0,1), (π/2,0), (π,-1), (3π/2,0), (2π,1).
Tip 1: Always rewrite functions in standard form A·sin(B(x - h)) + k to easily identify transformations.
Tip 2: For tangent functions, remember that asymptotes occur halfway between zeros.
Tip 3: Plot key points before drawing the full curve to ensure accuracy.
Solution: Exercises 4 to 5
4 Complex Transformation
Exercise 4
Graph the function j(x) = -2sin(4x + π/2) - 3 for two complete periods. State all characteristics.
Key Definitions:

Negative amplitude: Reflects the graph across the x-axis

Phase shift: For A·sin(Bx + C), phase shift is -C/B

Combined transformations: Multiple changes applied simultaneously

Function
j(x) = -2sin(4x + π/2) - 3
Rewrite
-2sin(4(x + π/8)) - 3
Parameters
A=-2, B=4, h=-π/8, k=-3
Step 1: Rewrite in standard form

j(x) = -2sin(4x + π/2) - 3 = -2sin(4(x + π/8)) - 3

Comparing to A·sin(B(x - h)) + k: A = -2, B = 4, h = -π/8, k = -3

Step 2: Identify characteristics

Amplitude: |A| = |-2| = 2 (negative reflects across x-axis)

Period: 2π/B = 2π/4 = π/2

Phase shift: h = -π/8 (to the left)

Vertical shift: k = -3 (downward)

Step 3: Determine range and key features

The graph oscillates between -3-2=-5 and -3+2=-1

Reflection causes the graph to start at minimum instead of maximum

Midline is y = -3

A = 2, P = π/2, Phase shift = π/8 left, V-shift = 3 down
Final answer:

The function j(x) = -2sin(4x + π/2) - 3 has amplitude 2, period π/2, phase shift π/8 left, and vertical shift 3 units down.

Applied rules:

• Negative amplitude: Reflects across x-axis

• Phase shift: -C/B for sin(Bx + C)

• Amplitude: Always positive |A|

Key Concept:

A negative amplitude coefficient reflects the entire graph across the x-axis while preserving the amplitude value as positive.

5 Real-World Application
Exercise 5
The height of a Ferris wheel rider is modeled by h(t) = 20sin(πt/5) + 25, where h is in feet and t is in minutes. Find the maximum height, minimum height, period, and graph one complete cycle.
Key Definitions:

Real-world modeling: Using trigonometric functions to represent periodic phenomena

Maximum value: Midline + Amplitude

Minimum value: Midline - Amplitude

Function
h(t) = 20sin(πt/5) + 25
Compare
A=20, B=π/5, D=25
Results
Max=45, Min=5, P=10
Step 1: Identify parameters

h(t) = 20sin(πt/5) + 25

A = 20 (amplitude), B = π/5, D = 25 (vertical shift)

Step 2: Calculate characteristics

Amplitude: |20| = 20 feet

Period: 2π/B = 2π/(π/5) = 10 minutes

Vertical shift: 25 feet (midline)

Maximum height: 25 + 20 = 45 feet

Minimum height: 25 - 20 = 5 feet

Step 3: Interpret in context

The Ferris wheel completes one revolution every 10 minutes

Riders travel between 5 feet (minimum) and 45 feet (maximum) above ground

The average height is 25 feet

Max = 45ft, Min = 5ft, Period = 10min
Final answer:

The Ferris wheel has a maximum height of 45 feet, minimum height of 5 feet, and completes a cycle every 10 minutes.

Applied rules:

• Maximum: Midline + Amplitude

• Minimum: Midline - Amplitude

• Period: 2π/B

Key Concept:

Trigonometric functions model many real-world periodic phenomena including tides, sound waves, alternating current, and circular motion like Ferris wheels.

Graphing Trigonometric Functions Master Guide
f(x) = A·sin(B(x - h)) + k
Transformation Analysis Framework
Essential Definitions:

Amplitude: Half the distance between maximum and minimum values of the function, determines vertical stretch.

Period: The length of one complete cycle of the function, determines horizontal compression/stretch.

Phase shift: Horizontal displacement of the function, shifts the graph left or right.

Vertical shift: Displacement of the midline, moves the entire graph up or down.

Midline: Horizontal line y = k around which the function oscillates.

Complete Graphing Methodology:
  1. Identify standard form: Rewrite function as A·sin(B(x - h)) + k or A·cos(B(x - h)) + k
  2. Extract parameters: Determine A, B, h, and k values
  3. Calculate characteristics: Find amplitude, period, phase shift, and vertical shift
  4. Establish coordinate system: Set up axes with appropriate scales
  5. Plot key points: Mark important points like maxima, minima, and x-intercepts
  6. Sketch the curve: Draw smooth periodic curve through key points
  7. Verify: Check that the graph matches all calculated characteristics
Tip 1: For functions like A·sin(Bx + C), rewrite as A·sin(B(x + C/B)) to identify phase shift as -C/B.
Tip 2: Negative coefficients cause reflections: negative A reflects across x-axis, negative B reflects across y-axis.
Tip 3: For tangent functions, locate asymptotes first, then plot points between them.
Tip 4: Always verify your graph by checking a couple of calculated points.
Function Differences: Sine starts at origin, cosine at maximum. Tangent has asymptotes and infinite range.
Common Mistakes: Confusing phase shift direction, miscalculating period, forgetting to consider negative amplitudes.
Applications: Physics (waves, oscillations), engineering (signal processing), economics (cyclical patterns).
Critical Formulas and Properties:

• Sine/Cosine: A·sin(B(x - h)) + k or A·cos(B(x - h)) + k

• Amplitude: |A|

• Period: 2π/|B|

• Phase shift: h units right (or -h units left)

• Vertical shift: k units up

• Tangent: A·tan(B(x - h)) + k, Period = π/|B|

• Range: [k - |A|, k + |A|] for sine/cosine, (-∞, ∞) for tangent

Questions & Answers

Question: How do I know whether a negative sign in front of the function reflects across the x-axis or changes the phase shift?

Answer: The location of the negative sign determines its effect:

  • Negative amplitude: f(x) = -A·sin(x) reflects across the x-axis (vertical reflection)
  • Negative inside argument: f(x) = sin(-x) reflects across the y-axis (horizontal reflection)
  • Negative phase shift: f(x) = sin(x - (-h)) = sin(x + h) shifts h units left

For example, f(x) = -2sin(x) has amplitude 2 and is reflected across the x-axis, while f(x) = 2sin(-x) has amplitude 2 and is reflected across the y-axis. The negative sign directly multiplying the function affects amplitude/vertical orientation, while negatives inside the argument affect horizontal transformations.

Question: I keep getting confused about phase shifts. How do I determine the direction and amount of shift?

Answer: The key is to rewrite the function in standard form A·sin(B(x - h)) + k:

  • Standard form: Look for the format A·sin(B(x - h)) + k
  • Positive h: Shifts graph to the right
  • Negative h: Shifts graph to the left
  • For A·sin(Bx + C): Factor out B: A·sin(B(x + C/B)) = A·sin(B(x - (-C/B)))

Example: f(x) = sin(2x + π) = sin(2(x + π/2)) = sin(2(x - (-π/2))). Here h = -π/2, so the graph shifts π/2 units to the left. The phase shift is always the value that makes the argument equal to zero: 2x + π = 0 → x = -π/2.

Question: How are trigonometric graphs used in engineering applications?

Answer: Trigonometric functions are fundamental in engineering for modeling periodic phenomena:

  • Electrical Engineering: AC voltage/current follows sinusoidal patterns: V(t) = V₀sin(ωt + φ)
  • Mechanical Engineering: Vibrations, oscillations, and harmonic motion in structures and machines
  • Signal Processing: Fourier analysis decomposes complex signals into trigonometric components
  • Control Systems: Analyzing system responses to periodic inputs

For example, when designing a bridge, engineers analyze how it might resonate at certain frequencies. The oscillation patterns follow trigonometric functions. In audio engineering, sound waves are modeled as combinations of sine waves. Understanding how to manipulate these functions is crucial for filtering, amplification, and signal processing.