Periodic Function: A function that repeats its values at regular intervals called the period.
General Form: \(f(t) = A\sin(B(t - C)) + D\) or \(f(t) = A\cos(B(t - C)) + D\)
- Identify the amplitude (A): half the distance between max and min values
- Find the period: time for one complete cycle
- Calculate B: \(B = \frac{2\pi}{\text{period}}\)
- Determine vertical shift (D): average of max and min values
- Find phase shift (C): adjust for initial conditions
\(A = \frac{\text{Max} - \text{Min}}{2} = \frac{40 - 10}{2} = \frac{30}{2} = 15\) feet
Period = 10 minutes
\(B = \frac{2\pi}{\text{period}} = \frac{2\pi}{10} = \frac{\pi}{5}\)
\(D = \frac{\text{Max} + \text{Min}}{2} = \frac{40 + 10}{2} = \frac{50}{2} = 25\) feet
Since the car starts at the bottom (minimum height) at t = 0, we use a cosine function with a phase shift.
At t = 0: \(f(0) = 10\), so we need: \(10 = 15\cos(C) + 25\)
\(\cos(C) = -1\), so \(C = 0\), but we need a negative cosine to start at minimum
Therefore: \(f(t) = 25 - 15\cos\left(\frac{\pi}{5}t\right)\)
The height function is \(f(t) = 25 - 15\cos\left(\frac{\pi}{5}t\right)\) where t is in minutes and f(t) is in feet.
• Amplitude Formula: \(A = \frac{\text{Max} - \text{Min}}{2}\)
• Period Formula: \(B = \frac{2\pi}{\text{period}}\)
• Vertical Shift: \(D = \frac{\text{Max} + \text{Min}}{2}\)
Seasonal Variation: Many natural phenomena follow periodic patterns based on Earth's orbit and axial tilt.
Phase Shift: Adjusts the horizontal position of the function to match real-world timing.
\(A = \frac{\text{Max} - \text{Min}}{2} = \frac{15 - 9}{2} = \frac{6}{2} = 3\) hours
The pattern repeats annually, so the period is 365 days.
\(B = \frac{2\pi}{\text{period}} = \frac{2\pi}{365}\)
\(D = \frac{\text{Max} + \text{Min}}{2} = \frac{15 + 9}{2} = \frac{24}{2} = 12\) hours
Maximum occurs at day 172, so we want the cosine function to reach its maximum at t = 172.
\(\cos(B(t - C)) = 1\) when \(t = 172\)
\(B(172 - C) = 0\), so \(C = 172\)
Therefore: \(f(t) = 12 + 3\cos\left(\frac{2\pi}{365}(t - 172)\right)\)
The daylight hours function is \(f(t) = 12 + 3\cos\left(\frac{2\pi}{365}(t - 172)\right)\) where t is the day of the year.
• Annual Period: 365 days for seasonal variation
• Phase Shift Calculation: Adjust to match timing of maximum
• Cosine Function: Starts at maximum when phase shift is properly set
Biological Rhythms: Many physiological processes follow periodic patterns such as heart rate, breathing, and brain waves.
Medical Applications: Understanding periodic models is crucial for medical monitoring and treatment.
\(A = \frac{\text{Max} - \text{Min}}{2} = \frac{120 - 80}{2} = \frac{40}{2} = 20\) mmHg
Period = 1 second
\(B = \frac{2\pi}{\text{period}} = \frac{2\pi}{1} = 2\pi\)
\(D = \frac{\text{Max} + \text{Min}}{2} = \frac{120 + 80}{2} = \frac{200}{2} = 100\) mmHg
Since the pressure starts at the maximum (systolic = 120 mmHg) at t = 0, we use a cosine function without phase shift.
At t = 0: \(P(0) = 100 + 20\cos(0) = 100 + 20 = 120\) mmHg ✓
Therefore: \(P(t) = 100 + 20\cos(2\pi t)\)
The blood pressure function is \(P(t) = 100 + 20\cos(2\pi t)\) where t is in seconds and P(t) is in mmHg.
• Biological Periods: Heart rate typically 1 beat per second
• Initial Conditions: Starting at maximum requires cosine function
• Medical Accuracy: Models help predict and monitor vital signs
Tidal Patterns: Ocean tides follow predictable periodic patterns influenced by the moon and sun's gravitational forces.
Mean Sea Level: The average water level used as a reference point.
\(A = \frac{\text{Max} - \text{Min}}{2} = \frac{12 - (-4)}{2} = \frac{16}{2} = 8\) feet
From high tide at 6 AM to the next high tide is 24 hours (full tidal cycle).
Actually, from high tide to low tide is 12 hours, so full period is 24 hours.
\(B = \frac{2\pi}{\text{period}} = \frac{2\pi}{24} = \frac{\pi}{12}\)
Mean sea level is the reference, so D = 0 (since high tide is +12 and low tide is -4 relative to mean sea level)
Wait: Actually, the midpoint between +12 and -4 is: \(D = \frac{12 + (-4)}{2} = \frac{8}{2} = 4\) feet above mean sea level
High tide occurs at 6 AM (t = 6), when the function should reach its maximum.
Using cosine: \(\cos\left(\frac{\pi}{12}(6 - C)\right) = 1\)
\(\frac{\pi}{12}(6 - C) = 0\), so \(C = 6\)
Therefore: \(L(t) = 4 + 8\cos\left(\frac{\pi}{12}(t - 6)\right)\)
The water level function is \(L(t) = 4 + 8\cos\left(\frac{\pi}{12}(t - 6)\right)\) where t is hours after midnight.
• Tidal Period: Approximately 12.4 hours for semidiurnal tides
• Reference Point: Mean sea level as baseline
• Phase Adjustment: Align function with actual timing
Sound Waves: Mechanical waves that propagate through a medium by causing particles to oscillate.
Frequency: Number of cycles per second (measured in Hertz, Hz).
The maximum displacement is the amplitude: \(A = 0.002\) mm
Frequency = 440 Hz means 440 cycles per second.
Period = \(\frac{1}{\text{frequency}} = \frac{1}{440}\) seconds per cycle
\(B = \frac{2\pi}{\text{period}} = \frac{2\pi}{\frac{1}{440}} = 2\pi \times 440 = 880\pi\)
Since the equilibrium position is 0 (no net displacement), \(D = 0\)
Without specific initial conditions, we can assume the displacement starts at 0 moving in the positive direction, so we use a sine function with no phase shift.
Therefore: \(d(t) = 0.002\sin(880\pi t)\)
The displacement function is \(d(t) = 0.002\sin(880\pi t)\) where t is in seconds and d(t) is in millimeters.
• Frequency-Period Relationship: \(\text{period} = \frac{1}{\text{frequency}}\)
• B Parameter: \(B = 2\pi \times \text{frequency}\)
• Wave Physics: Sound waves are longitudinal pressure waves
Periodic Phenomena: Events or quantities that repeat in regular intervals over time, such as tides, heartbeats, sound waves, and seasonal changes.
Amplitude (A): The maximum deviation from the midline; half the distance between maximum and minimum values.
Period: The time required for one complete cycle of the phenomenon.
Frequency: The number of cycles per unit time, which is the reciprocal of the period.
Phase Shift (C): Horizontal displacement that adjusts the starting point of the cycle.
Vertical Shift (D): Average value around which the function oscillates.
- Identify the phenomenon: Determine what is being modeled and its characteristics.
- Gather data: Find maximum and minimum values, timing of events, and cycle duration.
- Calculate parameters: Compute amplitude, period, vertical shift, and phase shift.
- Select function type: Choose sine or cosine based on initial conditions.
- Verify model: Test the function against known data points.
• Amplitude: \(A = \frac{\text{Max} - \text{Min}}{2}\)
• Vertical Shift: \(D = \frac{\text{Max} + \text{Min}}{2}\)
• B Parameter: \(B = \frac{2\pi}{\text{period}}\)
• Period: \(\text{period} = \frac{2\pi}{|B|}\)
• Frequency: \(\text{frequency} = \frac{|B|}{2\pi}\)
Analysis: The chart shows how each parameter affects the shape and position of the periodic function.
- Amplitude controls the height of the wave
- Period determines how frequently the wave repeats
- Phase shift moves the wave horizontally
- Vertical shift moves the wave up/down