Unit Circle: A circle centered at the origin with radius 1, where the coordinates of any point are (cos θ, sin θ) for angle θ.
Trigonometric Ratios: sin θ = y-coordinate, cos θ = x-coordinate, tan θ = y/x-coordinate.
- Locate the angle on the unit circle
- Identify the coordinates (x, y) of the corresponding point
- Read off the values: x = cos θ, y = sin θ
- Calculate tan θ = y/x
- Convert angle to radians if needed
30° corresponds to the point where the terminal side of the angle intersects the unit circle
For 30°, the coordinates are \(\left(\frac{\sqrt{3}}{2}, \frac{1}{2}\right)\)
This comes from the 30-60-90 right triangle with sides in ratio 1 : √3 : 2
cos(30°) = x-coordinate = \(\frac{\sqrt{3}}{2}\)
sin(30°) = y-coordinate = \(\frac{1}{2}\)
tan(30°) = \(\frac{\sin(30°)}{\cos(30°)} = \frac{\frac{1}{2}}{\frac{\sqrt{3}}{2}} = \frac{1}{\sqrt{3}} = \frac{\sqrt{3}}{3}\)
30° = \(\frac{\pi}{6}\) radians
sin(\(\frac{\pi}{6}\)) = \(\frac{1}{2}\), cos(\(\frac{\pi}{6}\)) = \(\frac{\sqrt{3}}{2}\), tan(\(\frac{\pi}{6}\)) = \(\frac{\sqrt{3}}{3}\)
sin(30°) = \(\frac{1}{2}\), cos(30°) = \(\frac{\sqrt{3}}{2}\), tan(30°) = \(\frac{\sqrt{3}}{3}\). In radians: sin(\(\frac{\pi}{6}\)) = \(\frac{1}{2}\), cos(\(\frac{\pi}{6}\)) = \(\frac{\sqrt{3}}{2}\), tan(\(\frac{\pi}{6}\)) = \(\frac{\sqrt{3}}{3}\).
• Unit Circle Definition: (cos θ, sin θ) are coordinates of point on unit circle
• Tangent Identity: tan θ = sin θ / cos θ
• Rationalization: \(\frac{1}{\sqrt{3}} = \frac{\sqrt{3}}{3}\)
Reference Angle: The acute angle formed between the terminal side of the given angle and the x-axis.
ASTC Rule: All trig functions positive in QI, Sin positive in QII, Tan positive in QIII, Cos positive in QIV.
135° is in the second quadrant (between 90° and 180°)
Reference angle = 180° - 135° = 45°
(For QII: Reference angle = 180° - θ)
sin(45°) = \(\frac{\sqrt{2}}{2}\), cos(45°) = \(\frac{\sqrt{2}}{2}\), tan(45°) = 1
In QII: Only sine is positive
sin(135°) = +sin(45°) = \(\frac{\sqrt{2}}{2}\)
cos(135°) = -cos(45°) = -\(\frac{\sqrt{2}}{2}\)
tan(135°) = -tan(45°) = -1
135° corresponds to the point \(\left(-\frac{\sqrt{2}}{2}, \frac{\sqrt{2}}{2}\right)\)
This confirms our results: x = cos(135°), y = sin(135°)
The reference angle for 135° is 45°. Since 135° is in QII, sin(135°) = \(\frac{\sqrt{2}}{2}\), cos(135°) = -\(\frac{\sqrt{2}}{2}\), and tan(135°) = -1.
• Reference Angle Calculation: Different formulas for each quadrant
• ASTC Rule: Determines signs of trig functions in each quadrant
• Quadrant Analysis: Helps determine correct signs
Coterminal Angles: Angles that share the same initial and terminal sides, differing by multiples of 360° (or 2π radians).
Coterminal Formula: θ + 360°n (or θ + 2πn) where n is any integer.
Add multiples of 360° to 45°:
First positive: 45° + 360° = 405°
Second positive: 45° + 2(360°) = 45° + 720° = 765°
Subtract multiples of 360° from 45°:
First negative: 45° - 360° = -315°
Second negative: 45° - 2(360°) = 45° - 720° = -675°
sin(45°) = \(\frac{\sqrt{2}}{2}\), cos(45°) = \(\frac{\sqrt{2}}{2}\), tan(45°) = 1
sin(405°) = sin(45° + 360°) = sin(45°) = \(\frac{\sqrt{2}}{2}\)
cos(405°) = cos(45° + 360°) = cos(45°) = \(\frac{\sqrt{2}}{2}\)
tan(405°) = tan(45° + 360°) = tan(45°) = 1
Coterminal angles have the same terminal side, so they intersect the unit circle at the same point
Therefore, they have identical x and y coordinates, resulting in identical trig values
Positive coterminal angles: 405°, 765°; Negative coterminal angles: -315°, -675°. All five angles (including 45°) have identical trigonometric values because they are coterminal and share the same terminal side on the unit circle.
• Coterminal Formula: θ + 360°n (or θ + 2πn) for integer n
• Periodicity: Trig functions repeat every 360° (or 2π radians)
• Unit Circle Property: Coterminal angles have same coordinates
Unit Circle: A circle with center at origin (0,0) and radius 1. Any point on the unit circle can be represented as (cos θ, sin θ) where θ is the angle from the positive x-axis.
Reference Angle: The acute angle that the terminal side of a given angle makes with the x-axis. Used to find trig values in any quadrant.
Coterminal Angles: Angles that have the same initial and terminal sides, differing by multiples of 360° or 2π radians.
- Memorize Key Angles: 0°, 30°, 45°, 60°, 90° and their equivalents in other quadrants
- Understand Coordinates: (cos θ, sin θ) where cos is x-coordinate and sin is y-coordinate
- Apply Reference Angles: Use reference angle to find magnitude, then determine sign based on quadrant
- Use ASTC Rule: Determine which functions are positive in each quadrant
- Verify with Identities: Use Pythagorean identity to check calculations
• Unit Circle Definition: (cos θ, sin θ) are coordinates of point on unit circle
• Pythagorean Identity: \(\cos^2 θ + \sin^2 θ = 1\) for all θ
• Periodicity: Trigonometric functions repeat every 360° or 2π radians
• Reference Angle Formulas: QI: θ, QII: 180° - θ, QIII: θ - 180°, QIV: 360° - θ
Quadrantal Angles: Angles whose terminal sides lie along the x-axis or y-axis (multiples of 90°).
Undefined Functions: Tangent is undefined when cosine equals zero, cotangent when sine equals zero.
0°: (1, 0) - positive x-axis
90°: (0, 1) - positive y-axis
180°: (-1, 0) - negative x-axis
270°: (0, -1) - negative y-axis
360°: (1, 0) - same as 0°
For each angle θ, sin θ = y-coordinate, cos θ = x-coordinate
sin(0°) = 0, cos(0°) = 1
sin(90°) = 1, cos(90°) = 0
sin(180°) = 0, cos(180°) = -1
sin(270°) = -1, cos(270°) = 0
sin(360°) = 0, cos(360°) = 1
tan θ = sin θ / cos θ
tan(0°) = 0/1 = 0
tan(90°) = 1/0 = undefined
tan(180°) = 0/(-1) = 0
tan(270°) = (-1)/0 = undefined
tan(360°) = 0/1 = 0
Tangent is undefined when cos θ = 0 because division by zero is undefined
At 90° and 270°, the terminal side is on the y-axis where x-coordinate (cosine) is 0
For all angles: cos²θ + sin²θ = 1
Example: cos²(90°) + sin²(90°) = 0² + 1² = 1 ✓
For quadrantal angles: sin(0°)=0, cos(0°)=1, tan(0°)=0; sin(90°)=1, cos(90°)=0, tan(90°) undefined; sin(180°)=0, cos(180°)=-1, tan(180°)=0; sin(270°)=-1, cos(270°)=0, tan(270°) undefined; sin(360°)=0, cos(360°)=1, tan(360°)=0.
• Unit Circle Definition: (cos θ, sin θ) coordinates
• Division by Zero: Functions undefined when denominator is zero
• Pythagorean Identity: cos²θ + sin²θ = 1 always holds
Exact Values: Trigonometric values expressed using radicals rather than decimal approximations.
Angle Evaluation: Breaking down complex expressions into individual trigonometric evaluations.
210° is in QIII (reference angle = 210° - 180° = 30°)
In QIII, sine is negative
sin(210°) = -sin(30°) = -\(\frac{1}{2}\)
300° is in QIV (reference angle = 360° - 300° = 60°)
In QIV, cosine is positive
cos(300°) = cos(60°) = \(\frac{1}{2}\)
135° is in QII (reference angle = 180° - 135° = 45°)
In QII, tangent is negative
tan(135°) = -tan(45°) = -1
\(\sin(210°) \cdot \cos(300°) + \tan(135°)\)
= \(\left(-\frac{1}{2}\right) \cdot \left(\frac{1}{2}\right) + (-1)\)
= \(-\frac{1}{4} - 1 = -\frac{1}{4} - \frac{4}{4} = -\frac{5}{4}\)
Check each component using unit circle coordinates:
210°: \(\left(-\frac{\sqrt{3}}{2}, -\frac{1}{2}\right)\) → sin = -\(\frac{1}{2}\) ✓
300°: \(\left(\frac{1}{2}, -\frac{\sqrt{3}}{2}\right)\) → cos = \(\frac{1}{2}\) ✓
135°: \(\left(-\frac{\sqrt{2}}{2}, \frac{\sqrt{2}}{2}\right)\) → tan = -1 ✓
\(\sin(210°) \cdot \cos(300°) + \tan(135°) = -\frac{5}{4}\).
• Reference Angle Method: Find reference angle and apply quadrant sign
• ASTC Rule: Determine correct signs in each quadrant
• Order of Operations: Multiplication before addition
Unit Circle: A circle with center at origin (0,0) and radius 1. Any point on the unit circle can be represented as (cos θ, sin θ) where θ is the angle from the positive x-axis measured counterclockwise. This provides a geometric interpretation of trigonometric functions.
Reference Angle: The acute angle formed between the terminal side of a given angle and the nearest x-axis. The reference angle is always positive and less than 90° (or π/2 radians). It helps determine the absolute values of trigonometric functions in any quadrant.
Coterminal Angles: Angles that share the same initial and terminal sides, differing by multiples of 360° (or 2π radians). They have identical trigonometric values.
- Memorize Special Triangles: Know the 30-60-90 and 45-45-90 triangles to derive unit circle values
- Understand Coordinate System: Remember that cos θ = x-coordinate and sin θ = y-coordinate
- Determine Quadrant: Identify which quadrant the angle falls in
- Find Reference Angle: Calculate the acute angle to the nearest x-axis
- Apply Sign Rules: Use ASTC rule to determine correct signs
- Calculate All Functions: Find sine, cosine, and tangent values
- Verify with Identities: Check using Pythagorean identity
• Unit Circle Definition: (cos θ, sin θ) are coordinates of point on unit circle
• Pythagorean Identity: \(\cos^2 θ + \sin^2 θ = 1\) for all θ
• Periodicity: Trigonometric functions repeat every 360° or 2π radians
• Reference Angle Formulas: QI: θ, QII: 180° - θ, QIII: θ - 180°, QIV: 360° - θ
• ASTC Rule: All positive in QI, Sin in QII, Tan in QIII, Cos in QIV
• Tangent Identity: \(\tan θ = \frac{\sin θ}{\cos θ}\) (undefined when cos θ = 0)
0° to 90°: sin increases, cos decreases
90° to 180°: sin decreases, cos becomes more negative
180° to 270°: sin becomes more negative, cos increases from negative
270° to 360°: sin increases, cos approaches 1
Analysis: The graphs show the periodic nature and symmetry of sine and cosine functions.
- Sine function reaches maximum at 90°, minimum at 270°
- Cosine function reaches maximum at 0° and 360°, minimum at 180°
- Both functions have range [-1, 1]