Solved Exercises on Vector Representation in Precalculus

Master vector representation: magnitude, direction, component form, and geometric interpretation through these 5 detailed exercises.

Solution: Exercises 1 to 3
1 Component form from initial and terminal points
Exercise 1
Find the component form of the vector v with initial point P(3, -2) and terminal point Q(7, 5).
Definition:

Component form of a vector: If a vector has initial point P(x₁, y₁) and terminal point Q(x₂, y₂), then its component form is v = ⟨x₂ - x₁, y₂ - y₁⟩.

Solution method:
  1. Identify the initial and terminal points
  2. Apply the component form formula: v = ⟨x₂ - x₁, y₂ - y₁⟩
  3. Subtract the coordinates accordingly
  4. Write the result in component form
Initial point
P(3, -2)
Terminal point
Q(7, 5)
Component form
v = ⟨4, 7⟩
Step 1: Identify the coordinates

Initial point P: (x₁, y₁) = (3, -2)

Terminal point Q: (x₂, y₂) = (7, 5)

Step 2: Apply the component form formula

v = ⟨x₂ - x₁, y₂ - y₁⟩

v = ⟨7 - 3, 5 - (-2)⟩

Step 3: Perform the subtractions

v = ⟨4, 5 + 2⟩

v = ⟨4, 7⟩

Step 4: Verify the result

If we start at P(3, -2) and move by vector ⟨4, 7⟩, we reach (3+4, -2+7) = (7, 5), which is Q ✓

v = ⟨4, 7⟩
Final answer:

The component form of the vector is v = ⟨4, 7⟩

Applied rules:

• Component form formula: v = ⟨x₂ - x₁, y₂ - y₁⟩

• Coordinate subtraction: Subtract initial from terminal coordinates

• Order matters: Terminal - Initial, not Initial - Terminal

Tip: Remember "Terminal minus Initial" for the component form.
Key note: The component form represents the change in x and y from start to end.
2 Magnitude of a vector
Exercise 2
Find the magnitude of the vector u = ⟨-3, 4⟩.
Definition:

Magnitude of a vector: If u = ⟨a, b⟩, then the magnitude is ||u|| = √(a² + b²).

Given vector
u = ⟨-3, 4⟩
Magnitude formula
||u|| = √(a² + b²)
Result
||u|| = 5
Step 1: Identify the components

For vector u = ⟨-3, 4⟩, we have a = -3 and b = 4

Step 2: Apply the magnitude formula

||u|| = √(a² + b²)

||u|| = √((-3)² + (4)²)

Step 3: Calculate the squares

(-3)² = 9 and (4)² = 16

||u|| = √(9 + 16)

Step 4: Add and take the square root

||u|| = √25 = 5

Step 5: Verify the result

Using the Pythagorean theorem, a right triangle with legs of length 3 and 4 has hypotenuse of length 5 ✓

||u|| = 5
Final answer:

The magnitude of the vector u is 5

Applied rules:

• Magnitude formula: ||u|| = √(a² + b²)

• Pythagorean theorem: Related to the distance formula

• Positive result: Magnitude is always non-negative

Tip: The magnitude is always positive, regardless of the sign of the components.
Key note: The magnitude represents the length of the vector.
3 Direction of a vector
Exercise 3
Find the direction angle of the vector w = ⟨5, -5⟩.
Definition:

Direction angle of a vector: If w = ⟨a, b⟩, then the direction angle θ satisfies tan(θ) = b/a, and θ is measured counterclockwise from the positive x-axis.

Given vector
w = ⟨5, -5⟩
Tangent ratio
tan(θ) = -5/5 = -1
Direction angle
θ = 315°
Step 1: Identify the components

For vector w = ⟨5, -5⟩, we have a = 5 and b = -5

Step 2: Determine the quadrant

Since a > 0 and b < 0, the vector is in Quadrant IV

Step 3: Apply the direction angle formula

tan(θ) = b/a = -5/5 = -1

Step 4: Find the reference angle

arctan(|-1|) = arctan(1) = 45°

Step 5: Find the actual angle in Quadrant IV

In Quadrant IV: θ = 360° - 45° = 315°

Step 6: Verify the result

cos(315°) = √2/2 ≈ 0.707 and sin(315°) = -√2/2 ≈ -0.707

The vector in unit form would be ⟨0.707, -0.707⟩, which has the same direction as ⟨5, -5⟩ ✓

θ = 315°
Final answer:

The direction angle of the vector w is 315°

Applied rules:

• Direction angle formula: tan(θ) = b/a

• Quadrant consideration: Adjust the angle based on the signs of a and b

• Angle measurement: Counterclockwise from positive x-axis

Tip: Always consider the quadrant when finding direction angles.
Key note: The direction angle is always between 0° and 360°.
Vector Representation Fundamentals
v = ⟨x₂ - x₁, y₂ - y₁⟩
Component Form
Magnitude
||v|| = √(a² + b²)
Magnitude of vector v = ⟨a, b⟩
Direction
tan(θ) = b/a
Direction angle of v = ⟨a, b⟩
Unit Vector
û = u/||u||
Unit vector in direction of u
v = ||v||·⟨cos(θ), sin(θ)⟩
Magnitude-Direction Form
Component form: Represents vector as change in x and y coordinates.
Direction angle: Always measured counterclockwise from positive x-axis.
Solution: Exercises 4 to 5
4 Unit vector
Exercise 4
Find the unit vector in the direction of v = ⟨-6, 8⟩.
Definition:

Unit vector: A vector with magnitude 1 that points in the same direction as the original vector. For vector v, the unit vector is û = v/||v||.

Given vector
v = ⟨-6, 8⟩
Magnitude
||v|| = 10
Unit vector
û = ⟨-3/5, 4/5⟩
Step 1: Find the magnitude of v

||v|| = √((-6)² + (8)²)

= √(36 + 64)

= √100 = 10

Step 2: Apply the unit vector formula

û = v/||v|| = ⟨-6, 8⟩/10

Step 3: Divide each component by the magnitude

û = ⟨-6/10, 8/10⟩

û = ⟨-3/5, 4/5⟩

Step 4: Verify that the unit vector has magnitude 1

||û|| = √((-3/5)² + (4/5)²)

= √(9/25 + 16/25)

= √(25/25) = √1 = 1 ✓

Step 5: Confirm it points in the same direction

Both v and û have the same direction angle, since they're scalar multiples of each other

û = ⟨-3/5, 4/5⟩
Final answer:

The unit vector in the direction of v is û = ⟨-3/5, 4/5⟩

Applied rules:

• Unit vector formula: û = v/||v||

• Magnitude calculation: ||v|| = √(a² + b²)

• Scalar division: Divide each component by the magnitude

Tip: The unit vector preserves the direction while normalizing the magnitude to 1.
Key note: Unit vectors are useful for indicating direction without magnitude.
5 Vector from magnitude and direction
Exercise 5
Find the component form of a vector with magnitude 10 and direction angle 120°.
Definition:

Vector from magnitude and direction: If a vector has magnitude ||v|| and direction angle θ, then v = ⟨||v||cos(θ), ||v||sin(θ)⟩.

Given
||v|| = 10, θ = 120°
Formula
v = ⟨||v||cos(θ), ||v||sin(θ)⟩
Result
v = ⟨-5, 5√3⟩
Step 1: Apply the formula for component form

v = ⟨||v||cos(θ), ||v||sin(θ)⟩

v = ⟨10cos(120°), 10sin(120°)⟩

Step 2: Evaluate the trigonometric functions

cos(120°) = cos(180° - 60°) = -cos(60°) = -1/2

sin(120°) = sin(180° - 60°) = sin(60°) = √3/2

Step 3: Multiply by the magnitude

x-component: 10 × (-1/2) = -5

y-component: 10 × (√3/2) = 5√3

Step 4: Write the component form

v = ⟨-5, 5√3⟩

Step 5: Verify the result

Magnitude: √((-5)² + (5√3)²) = √(25 + 75) = √100 = 10 ✓

Direction: tan(θ) = (5√3)/(-5) = -√3, which corresponds to θ = 120° ✓

v = ⟨-5, 5√3⟩
Final answer:

The component form of the vector is v = ⟨-5, 5√3⟩

Applied rules:

• Conversion formula: v = ⟨||v||cos(θ), ||v||sin(θ)⟩

• Trigonometric evaluation: Know exact values for special angles

• Quadrant verification: Check that signs match the given direction

Tip: Use reference angles to evaluate trig functions for angles in other quadrants.
Key note: At 120°, the vector points into Quadrant II, so x is negative and y is positive.
Fundamental Laws, Methods, and Key Concepts in Vector Representation
||v|| = √(a² + b²)
Magnitude Formula
Key definitions:

Vector: A quantity that has both magnitude and direction.

Component form: Representation of a vector as v = ⟨a, b⟩ where a and b are the horizontal and vertical components.

Magnitude: The length of the vector, calculated as ||v|| = √(a² + b²).

Direction angle: The angle the vector makes with the positive x-axis, measured counterclockwise.

Unit vector: A vector with magnitude 1 that indicates direction.

Complete methodology:
  1. Identify the form: Determine if given initial/terminal points, components, magnitude/direction, etc.
  2. Select the formula: Choose the appropriate conversion formula.
  3. Apply the formula: Substitute values and perform calculations.
  4. Consider quadrants: Account for the correct signs and angles.
  5. Verify the result: Check that magnitude and direction are consistent.
Tip 1: Remember that magnitude is always non-negative.
Tip 2: Direction angles are measured counterclockwise from the positive x-axis.
Tip 3: Always consider the quadrant when finding direction angles.
Tip 4: Unit vectors preserve direction while normalizing magnitude to 1.
Common errors: Forgetting to consider quadrants, miscalculating magnitudes, incorrect sign handling.
Exam preparation: Practice all conversion forms, memorize formulas, master quadrant considerations.
Formulas to know by heart:

• Component form: v = ⟨x₂ - x₁, y₂ - y₁⟩

• Magnitude: ||v|| = √(a² + b²)

• Direction: tan(θ) = b/a (with quadrant consideration)

• Unit vector: û = v/||v||

• From magnitude/direction: v = ⟨||v||cos(θ), ||v||sin(θ)⟩

• Standard unit vectors: i = ⟨1, 0⟩, j = ⟨0, 1⟩

Comprehensive Summary: Vector Representation

This section provides a detailed overview of vector representation, including definitions, rules, methods, examples, and tips for mastering vector concepts in precalculus.

Definitions & Keywords

Vector: A mathematical object with both magnitude and direction.

Component Form: Vector expressed as v = ⟨a, b⟩ indicating horizontal and vertical changes.

Magnitude: The length of a vector, denoted ||v|| = √(a² + b²).

Direction Angle: Angle measured counterclockwise from positive x-axis to the vector.

Unit Vector: Vector with magnitude 1 that preserves direction information.

Standard Unit Vectors: i = ⟨1, 0⟩ and j = ⟨0, 1⟩ basis vectors.

Position Vector: Vector from origin to a specific point.

Core Rules & Principles

Component Formula: v = ⟨x₂ - x₁, y₂ - y₁⟩ for initial point (x₁, y₁) and terminal point (x₂, y₂).

Magnitude Formula: ||v|| = √(a² + b²) for vector v = ⟨a, b⟩.

Direction Formula: tan(θ) = b/a, with quadrant adjustment.

Unit Vector Formula: û = v/||v||.

Conversion Formula: v = ⟨||v||cos(θ), ||v||sin(θ)⟩ from magnitude and direction.

Quadrant Rules: QI: (+,+), QII: (-,+), QIII: (-,-), QIV: (+,-).

Angle Range: Direction angles are typically between 0° and 360°.

Step-by-Step Methods

Method 1 - Component Form:

  1. Identify initial and terminal points
  2. Apply formula: v = ⟨x₂ - x₁, y₂ - y₁⟩
  3. Subtract coordinates in order
  4. Express as ordered pair in brackets

Method 2 - Magnitude:

  1. Identify vector components
  2. Apply formula: ||v|| = √(a² + b²)
  3. Square each component
  4. Add and take square root

Examples & Applications

Simple Example: Vector from (1,2) to (4,6) is ⟨3,4⟩ with magnitude 5.

Intermediate Example: Vector ⟨-3,4⟩ has magnitude 5 and direction angle ≈ 126.87°.

Advanced Example: Physics problems involving force, velocity, and acceleration vectors.

Application: Navigation, computer graphics, engineering design.

Physics Connection: Representing displacement, velocity, and acceleration.

Engineering Use: Force analysis and structural design.

Tips & Common Pitfalls

Tips:

  • Always sketch vectors to visualize the problem
  • Remember "Terminal minus Initial" for component form
  • Check that your direction angle is in the correct quadrant
  • Verify that unit vectors have magnitude 1
  • Use reference angles for non-quadrant angles

Common Pitfalls:

  • Reversing the order in component form calculation
  • Forgetting to consider quadrants for direction angles
  • Miscalculating squares and square roots
  • Assuming magnitude can be negative
  • Not adjusting angles for correct quadrant

Key Notes for Memorization

Component Form: Remember "Terminal - Initial" for both x and y coordinates.

Magnitude: Always positive, based on Pythagorean theorem.

Direction Angles: Counterclockwise from positive x-axis, adjust for quadrant.

Unit Vectors: Preserve direction, normalize magnitude to 1.

Quadrant Signs: Memorize which components are positive/negative in each quadrant.

Conversion: Magnitude/direction ↔ component form using cosine and sine.

Questions & Answers

Question: I'm confused about how to find the direction angle when the vector is in different quadrants. How do I handle that?

Answer: The key is to find the reference angle first, then adjust based on the quadrant:

  • Quadrant I: Direction angle = reference angle
  • Quadrant II: Direction angle = 180° - reference angle
  • Quadrant III: Direction angle = 180° + reference angle
  • Quadrant IV: Direction angle = 360° - reference angle

For example, if you have vector ⟨-3, -4⟩, then tan(θ) = -4/-3 = 4/3. The reference angle is arctan(4/3) ≈ 53.13°. Since both components are negative, the vector is in QIII, so θ = 180° + 53.13° = 233.13°.

Question: What's the difference between a vector and a unit vector? Why would I want a unit vector?

Answer: A unit vector is a special type of vector that has a magnitude of exactly 1:

  • Regular vector: Has both magnitude and direction
  • Unit vector: Preserves only the direction information (magnitude normalized to 1)
  • Formula: û = v/||v|| (divide vector by its magnitude)

Unit vectors are useful when you only care about direction, not magnitude. They're also helpful for expressing vectors in terms of standard unit vectors: v = ||v||(cos(θ)i + sin(θ)j).

Question: How do I convert between component form and magnitude-direction form?

Answer: There are two conversion formulas:

  1. Component to magnitude-direction:
    • Magnitude: ||v|| = √(a² + b²)
    • Direction: tan(θ) = b/a (adjust for quadrant)
  2. Magnitude-direction to component:
    • v = ⟨||v||cos(θ), ||v||sin(θ)⟩

For example, if v = ⟨3, 4⟩, then ||v|| = 5 and θ ≈ 53.13°. Going the other way: if ||v|| = 5 and θ = 53.13°, then v = ⟨5cos(53.13°), 5sin(53.13°)⟩ = ⟨3, 4⟩.