Exponential model: A nonlinear model of the form y = a·e^(bx), where a is the initial value and b is the growth rate.
- Take the natural logarithm of both sides: ln(y) = ln(a) + bx
- Fit a linear regression to the transformed data (ln(y) vs x)
- Extract coefficients: intercept = ln(a), slope = b
- Transform back: a = e^(intercept)
- Interpret the parameters in original scale
Hours (x): 0, 1, 2, 3, 4
ln(Population): 4.605, 5.011, 5.416, 5.821, 6.226
ln(ŷ) = 4.605 + 0.405x
(using least squares regression)
â = e^4.605 = 100
b̂ = 0.405
Model: ŷ = 100·e^(0.405x)
a = 100: Initial population at time 0
b = 0.405: Growth rate per hour
Growth factor: e^0.405 ≈ 1.5 (50% increase per hour)
At x=1: ŷ = 100·e^(0.405) = 150 ✓
At x=2: ŷ = 100·e^(0.81) = 225 ✓
The exponential model is ŷ = 100·e^(0.405x), where the population starts at 100 and grows at a rate of 40.5% per hour (multiplying by 1.5 each hour).
• Linearization: Take log to transform to linear form
• Parameter interpretation: a = initial value, b = rate
• Validation: Check model fits original data
• Initial population: 100 bacteria
• Growth rate: 40.5% per hour
• Population doubles approximately every 1.7 hours
Logistic model: A nonlinear model of the form y = L/(1 + ae^(-bx)), describing growth that starts exponentially but levels off as it approaches a maximum.
y = L/(1 + ae^(-bx))
L = carrying capacity (maximum value)
a = determines initial value
b = growth rate
From the data, L ≈ 100% (approaching 100% market share)
Using nonlinear regression techniques
â ≈ 19, b̂ ≈ 1.1
ŷ = 100/(1 + 19e^(-1.1x))
L = 100: Maximum possible market share
a = 19: Related to initial market share
b = 1.1: Rate of market penetration
Early growth: Rapid (exponential-like)
Mid growth: Sigmoidal curve
Late growth: Approaches maximum slowly
Week 6: ŷ ≈ 92%
Week 8: ŷ ≈ 98%
The logistic model is ŷ = 100/(1 + 19e^(-1.1x)), predicting a maximum market share of 100% with rapid early adoption and slower late adoption.
• S-shaped curve: Characteristic of logistic growth
• Asymptotic behavior: Approaches maximum value
• Inflection point: Where growth rate is maximum
• Maximum market share: 100%
• Fastest growth occurs at ~50% market share
• Approaches saturation gradually
Polynomial model: A nonlinear model of the form y = aₙxⁿ + aₙ₋₁xⁿ⁻¹ + ... + a₁x + a₀, where the highest power determines the degree.
Model: y = ax² + bx + c
At t=0: 0 = a(0)² + b(0) + c → c = 0
At t=1: 48 = a(1)² + b(1) + 0 → a + b = 48
At t=2: 64 = a(4) + b(2) + 0 → 4a + 2b = 64
From equation 2: b = 48 - a
Substitute into equation 3: 4a + 2(48-a) = 64
4a + 96 - 2a = 64
2a = -32
a = -16
b = 48 - (-16) = 64
ŷ = -16t² + 64t
c = 0: Ball starts at ground level
b = 64: Initial velocity component
a = -16: Acceleration due to gravity (-16 ft/s²)
Maximum height occurs at t = -b/(2a) = -64/(2×-16) = 2 seconds
Maximum height = -16(4) + 64(2) = 64 feet
The quadratic model is ŷ = -16t² + 64t, representing projectile motion with initial velocity of 64 ft/s and acceleration due to gravity of -32 ft/s².
• Projectile motion: Parabolic trajectory follows quadratic model
• Vertex form: Maximum occurs at t = -b/(2a)
• Physics connection: Coefficients relate to physical parameters
• Initial height: 0 feet
• Initial velocity: 64 ft/s
• Gravity acceleration: -32 ft/s²
Nonlinear regression: A statistical technique to model relationships that are not linear in the parameters.
Linearizable models: Nonlinear models that can be transformed into linear models through mathematical transformations.
Iterative methods: Algorithms that approach parameter estimates through successive approximations.
Goodness of fit: Measures how well the model fits the observed data.
Model selection: The process of choosing the most appropriate model for the data.
- Visual inspection: Plot data to identify potential nonlinear patterns
- Model selection: Choose appropriate nonlinear model based on theory/data pattern
- Parameter estimation: Use linearization or iterative methods
- Model fitting: Estimate model parameters
- Goodness of fit: Assess how well the model fits the data
- Residual analysis: Check model adequacy
- Interpretation: Understand parameter meanings in context
- Prediction: Use model for forecasting
• Exponential: Constant proportional growth/decay
• Logistic: Growth with upper limit (saturation)
• Polynomial: Smooth curves of various shapes
• Power: Scaling relationships (area-volume)
• Nonlinear models may have multiple local minima
• Good starting values are crucial for convergence
• Parameter interpretation can be complex
• Extrapolation can be unreliable
Power model: A nonlinear model of the form y = ax^b, often representing scaling relationships in science.
Take logarithms of both sides: ln(y) = ln(a) + b·ln(x)
This converts the power model to linear: Y = A + bX
ln(Radius): 0, 0.693, 1.099, 1.386, 1.609
ln(Area): 1.145, 2.530, 3.342, 3.919, 4.363
ln(ŷ) = 1.145 + 2.000·ln(x)
(slope ≈ 2, intercept ≈ 1.145)
â = e^1.145 ≈ 3.14
b̂ = 2.000
Model: ŷ = 3.14·x²
Theoretical: Area = π·radius²
π ≈ 3.14159, so model ŷ = 3.14·x² matches theory
a ≈ π: The mathematical constant
b = 2: The exponent confirming area scales with radius squared
The power model is ŷ = 3.14·x², which confirms the theoretical relationship Area = π·radius² with b = 2 confirming the quadratic scaling.
• Log-log transformation: Converts power model to linear
• Theoretical validation: Model matches physical law
• Scaling exponent: b = 2 confirms quadratic relationship
Model comparison: The process of evaluating multiple models to determine which best describes the data.
Transform: ln(y) vs x
Linear regression: ln(ŷ) = 0.693 + 0.693x
Exponential model: ŷ = 2·e^(0.693x)
R² ≈ 0.98
Direct polynomial fitting: ŷ = 2x²
Perfect fit: R² = 1.0
Transform: ln(y) vs ln(x)
Linear regression: ln(ŷ) = 0.693 + 2·ln(x)
Power model: ŷ = 2·x²
R² = 1.0
Quadratic: ŷ = 2x², R² = 1.0
Power: ŷ = 2x², R² = 1.0
Exponential: ŷ = 2·e^(0.693x), R² ≈ 0.98
Data follows y = 2x² exactly
Both quadratic and power models are identical
Exponential model is less appropriate
Quadratic and power models both perfectly describe the data
Based on simplicity and direct interpretation, quadratic is preferred
The quadratic model ŷ = 2x² provides the best fit with R² = 1.0. The data follows a perfect quadratic relationship where y = 2x².
• Model selection: Choose based on goodness of fit and interpretability
• Pattern recognition: Identify the true underlying relationship
• Simplicity principle: Prefer simpler models when fit is equal
Regression analysis: A statistical method to model the relationship between dependent and independent variables.
Nonlinear least squares: An optimization method that minimizes the sum of squared residuals in nonlinear models.
Parameter estimation: The process of determining the values of model parameters that best fit the data.
Convergence: The process by which iterative algorithms approach the optimal parameter values.
Local vs global optima: Local optima are best in a neighborhood; global optima are best overall.
- Exploratory analysis: Visualize data and identify patterns
- Model specification: Choose appropriate functional form
- Parameter initialization: Set starting values for iterative methods
- Optimization: Minimize objective function using iterative algorithms
- Convergence assessment: Verify algorithm converged to optimal solution
- Model validation: Check adequacy and predictive capability
- Residual analysis: Evaluate model assumptions
- Diagnostic checking: Identify outliers and influential points
• Model complexity: Balance fit and parsimony
• Physical meaning: Parameters should have interpretable meanings
• Extrapolation: Be cautious when predicting beyond data range
• Model validation: Use multiple criteria to assess adequacy
• Robustness: Check sensitivity to outliers and influential points
• Nonlinear models may require specialized software for estimation
• Convergence issues are common with complex models
• Standard errors and confidence intervals require special methods
• Model selection criteria (AIC, BIC) help compare models