Dot Plot: A simple graphical representation where each data point is shown as a dot above its value on a number line.
Shape: The overall pattern of the distribution (symmetric, skewed, uniform).
Center: The middle value (median) or average (mean).
Spread: How spread out the data is (range, interquartile range).
- Identify the range of values
- Draw a horizontal axis with evenly spaced marks
- Place one dot for each occurrence of each value
- Stack dots vertically for repeated values
- Analyze the resulting pattern
Sorted: 75, 75, 75, 78, 78, 78, 80, 80, 80, 82, 82, 82, 85, 85, 85, 88, 88, 88, 90, 92
The distribution is roughly symmetric with most values concentrated between 75 and 88.
There's a slight right skew due to the values 90 and 92.
Median: The middle values are 82 and 82, so median = 82
Mean: (3×75 + 3×78 + 3×80 + 3×82 + 3×85 + 3×88 + 1×90 + 1×92) ÷ 20 = 1644 ÷ 20 = 82.2
Range: 92 - 75 = 17
Most data is clustered in the 75-88 range
Values 90 and 92 are potential outliers
Mode: 75, 78, 80, 82, 85, 88 (all occur 3 times, so multiple modes)
The dot plot shows a roughly symmetric distribution of test scores.
Center: Median = 82, Mean = 82.2
Spread: Range = 17, most scores between 75 and 88
Multiple modes at 75, 78, 80, 82, 85, 88
• Dot Plot Construction: One dot per data point stacked vertically
• Center Identification: Median is middle value when sorted
• Shape Analysis: Symmetric if balanced, skewed if tail extends
• Spread Measurement: Range = Max - Min
Symmetric Distribution: Left and right sides are mirror images.
Skewed Distribution: One tail extends further than the other.
Median: The middle value when data is ordered.
Sorted: 68, 68, 69, 69, 70, 70, 70, 71, 71, 72, 72, 73, 74, 74, 75
The distribution is roughly symmetric with the mode at 70°F.
Values are fairly evenly distributed around the center.
With 15 values, the median is the 8th value: 71°F
Range = Maximum - Minimum = 75 - 68 = 7°F
Mode = 70°F (appears 3 times)
The distribution appears nearly symmetric with a slight right tail.
Temperatures cluster around 69-74°F with few outliers.
The temperature distribution is roughly symmetric.
Median: 71°F, Range: 7°F, Mode: 70°F
The temperatures are tightly clustered with minimal spread.
• Median Position: For n odd, median is at position (n+1)/2
• Range Calculation: Range = Maximum - Minimum
• Symmetry Assessment: Compare left and right halves of distribution
Uniform Distribution: All values occur with approximately equal frequency.
Even Distribution: Data points are evenly spaced across the range.
Each age from 23 to 71 appears exactly once, with a 2-year increment between consecutive values.
The distribution is perfectly uniform - each value occurs with equal frequency (once).
It's also symmetric since the values are evenly spaced.
Median: The 13th value (middle of 25) = 47 years
Mean: (23 + 25 + ... + 71) ÷ 25 = 1175 ÷ 25 = 47 years
Range: 71 - 23 = 48 years
Since all values are equally spaced, this is a uniform distribution.
Mode: Since all values appear once, there is no single mode (uniform distribution)
This is a perfectly uniform distribution with evenly spaced values.
The age distribution is perfectly uniform with each age appearing exactly once.
Center: Median = 47, Mean = 47
Spread: Range = 48 years
Since all values are equally frequent, there is no mode.
• Uniform Distribution: All values occur with equal frequency
• Perfect Symmetry: Mean = Median for symmetric distributions
• Even Spacing: Equal intervals between consecutive values
Dot Plot: A simple graphical display of data using dots plotted on a number line to show frequency of each value.
Quantitative Data: Numerical data that can be measured and ordered.
Frequency: How often each value occurs in the dataset.
Shape: The overall pattern of the distribution (symmetric, skewed left/right, uniform).
• Range = Maximum - Minimum
• Median = Middle value when ordered
• Mode = Most frequently occurring value(s)
• Mean = Sum of all values ÷ Number of values
Skewed Distribution: Asymmetric distribution with a longer tail on one side.
Right Skewed: Tail extends to the right (higher values).
Left Skewed: Tail extends to the left (lower values).
The distribution is roughly symmetric with a peak at 15 items sold.
Values cluster around 14-16 with fewer occurrences at the extremes.
Mean = (1×12 + 1×13 + 4×14 + 6×15 + 4×16 + 2×17 + 2×18) ÷ 20
= (12 + 13 + 56 + 90 + 64 + 34 + 36) ÷ 20 = 305 ÷ 20 = 15.25
With 20 values, median is average of 10th and 11th values when ordered.
Ordered: 12, 13, 14, 14, 14, 14, 15, 15, 15, 15, 15, 15, 16, 16, 16, 16, 17, 17, 18, 18
10th value = 15, 11th value = 15
Median = (15 + 15) ÷ 2 = 15
Mode = 15 (occurs 6 times, more than any other value)
The distribution is nearly symmetric with mean (15.25) close to median (15).
There's a slight right skew due to the values at 17 and 18.
The sales distribution is roughly symmetric with a mode of 15 items.
Mean = 15.25, Median = 15, Mode = 15
Most days have sales between 14 and 16 items.
• Mean Calculation: Sum of (value × frequency) ÷ Total count
• Median Position: Average of middle two values for even n
• Mode Identification: Value with highest frequency
Uniform Distribution: All values occur with equal frequency.
Evenly Spaced: Constant difference between consecutive values.
Each time from 180 to 265 minutes appears exactly once, with a 5-minute increment between consecutive values.
The distribution is perfectly uniform - each value occurs with equal frequency (once).
It's also symmetric since the values are evenly spaced.
With 18 values, median is average of 9th and 10th values: (220 + 225) ÷ 2 = 222.5 min
Range = Maximum - Minimum = 265 - 180 = 85 minutes
Since all values appear once, there is no single mode (uniform distribution)
This is a perfectly uniform distribution with evenly spaced values.
Training times range from 3 hours to 4 hours 25 minutes.
The training time distribution is perfectly uniform.
Median: 222.5 minutes, Range: 85 minutes
Since all values are equally frequent, there is no mode.
• Uniform Distribution: All values occur with equal frequency
• Even Spacing: Constant intervals between consecutive values
• Perfect Symmetry: Mean and median are equal
Complete Summary: Analyzing Association in Two-Way Tables
Two-Way Table: Displays the frequency distribution of two categorical variables.
Marginal Frequency: Totals for each row and column.
Joint Frequency: Frequency in each individual cell.
Conditional Frequency: Frequency of one variable given a specific value of another.
Association Detection: Compare conditional relative frequencies across categories.
Independence: Conditional frequencies are similar across categories.
Dependence: Conditional frequencies differ significantly across categories.
Chi-Square Test: Statistical test for independence (advanced).
Step 1: Construct the two-way table with observed frequencies.
Step 2: Calculate marginal totals.
Step 3: Compute conditional relative frequencies for each category.
Step 4: Compare conditional frequencies to assess association.
Step 5: Draw conclusions about the relationship.
Strong Association: Large differences in conditional frequencies.
Moderate Association: Noticeable but not dramatic differences.
Weak Association: Small differences in conditional frequencies.
Independence: Similar conditional frequencies across categories.
Association: A relationship between two variables where knowing the value of one variable provides information about the value of the other.
Conditional Relative Frequency: The relative frequency of one variable given a specific value of another variable.
Independence: No relationship exists between variables; the conditional relative frequencies are the same across all categories.
Contingency Table: Another name for a two-way table.
Marginal Distribution: The distribution of one variable ignoring the other.
- Construct Table: Organize data into a two-way table format.
- Calculate Marginals: Find row and column totals.
- Compute Conditional Frequencies: Calculate P(A|B) for each category of B.
- Compare Frequencies: Look for differences in conditional relative frequencies.
- Determine Association: Decide if variables are associated or independent.
• Conditional Relative Frequency = Cell Value ÷ Row/Column Total
• Marginal Relative Frequency = Row/Column Total ÷ Grand Total
• Association exists when conditional frequencies differ significantly
• Independence exists when conditional frequencies are similar
Questions & Answers
Question: How do I know if the differences in conditional relative frequencies are significant enough to claim association?
Answer: At the high school level, use these guidelines:
Practical Significance:
- Differences > 15-20% suggest strong association
- Differences 5-15% suggest moderate association
- Differences < 5% suggest weak or no association
Context Matters:
What matters depends on the situation. A 5% difference in drug effectiveness could be clinically significant, while a 20% difference in survey responses might not be practically meaningful.
Advanced Statistics:
Later, you'll learn the chi-square test of independence, which provides a statistical measure of significance based on sample size and observed differences.
Question: Can two variables be associated but not causally related? What's the difference?
Answer: Yes, association does not imply causation!
Association vs. Causation:
- Association: Variables tend to occur together (correlation)
- Causation: One variable directly causes changes in another
Examples of Association Without Causation:
- Ice cream sales and drowning incidents (both increase in summer)
- Shoe size and reading ability in children (both related to age)
- Number of firefighters and fire damage (more severe fires require more firefighters)
Association indicates a relationship that may warrant further investigation, but establishing causation requires controlled experiments and ruling out confounding variables.
Question: When calculating conditional relative frequencies, should I condition on rows or columns?
Answer: The choice depends on what question you're trying to answer:
Condition on Rows: When you want to know the distribution of the column variable given each row category.
Example: P(Like Product | Gender) - probability of liking the product given the person's gender.
Condition on Columns: When you want to know the distribution of the row variable given each column category.
Example: P(Gender | Like Product) - probability of being a certain gender given that the person likes the product.
Both approaches are valid and can reveal different insights. The key is to be consistent in your analysis and clearly state what you're conditioning on.