Stem-and-leaf plot: A graphical representation where each data value is split into a "stem" (leading digit(s)) and a "leaf" (trailing digit)
- Identify the stems (tens place for 2-digit numbers)
- List stems in ascending order
- Place leaves (units place) next to corresponding stems
- Order leaves from smallest to largest
- Include a key explaining the notation
Raw data: 84, 72, 91, 88, 75, 90, 82, 78, 86, 79, 85, 93, 76, 89, 81
Sorted data: 72, 75, 76, 78, 79, 81, 82, 84, 85, 86, 88, 89, 90, 91, 93
For 2-digit numbers: Stem = tens digit, Leaf = units digit
72 → Stem: 7, Leaf: 2
84 → Stem: 8, Leaf: 4
91 → Stem: 9, Leaf: 1
Key: 7 | 2 means 72
Test Scores Stem-and-Leaf Plot
Key: 7 | 2 means 72
• Stem selection: Choose appropriate place value for stems (usually highest place value)
• Leaf organization: Order leaves from smallest to largest within each stem
• Key inclusion: Always provide a key to interpret the plot correctly
Stem | Leaf
1 | 2 3 5 7 8
2 | 1 4 4 6 8 9
3 | 0 2 5 5 7
4 | 1 3 6
Key: 1 | 2 means 12
Minimum: Smallest value in the data set
Maximum: Largest value in the data set
Median: Middle value when data is arranged in order
Mode: Value that appears most frequently
Range: Difference between maximum and minimum
Row 1: 12, 13, 15, 17, 18
Row 2: 21, 24, 24, 26, 28, 29
Row 3: 30, 32, 35, 35, 37
Row 4: 41, 43, 46
Complete data: 12, 13, 15, 17, 18, 21, 24, 24, 26, 28, 29, 30, 32, 35, 35, 37, 41, 43, 46
Minimum: 12 (smallest value)
Maximum: 46 (largest value)
Total values = 19 (odd number)
Position of median = (19+1)/2 = 10th value
Counting: 12, 13, 15, 17, 18, 21, 24, 24, 26, 28, 29, 30, 32, 35, 35, 37, 41, 43, 46
Median: 28
Count frequencies: 24 appears twice, 35 appears twice
All other values appear once
Mode: 24 and 35 (bimodal)
Range: Maximum - Minimum = 46 - 12 = 34
Minimum: 12
Maximum: 46
Median: 28
Mode: 24 and 35
Range: 34
• Data reconstruction: Convert stem-and-leaf back to actual values
• Statistical measures: Apply standard formulas to reconstructed data
• Median position: For n values, median is at (n+1)/2 position if n is odd
Team A: 72, 74, 75, 76, 78, 79, 80, 81, 82, 83
Team B: 71, 73, 74, 75, 76, 77, 78, 79, 80, 82, 84
Which team has the taller players overall?
A comparison tool showing two data sets side by side using the same stem with leaves on opposite sides
- Find the common stem range for both data sets
- Place one team's leaves on the left, the other on the right
- Compare distributions visually
- Calculate summary statistics for each team
Team A: 72, 74, 75, 76, 78, 79, 80, 81, 82, 83
Team B: 71, 73, 74, 75, 76, 77, 78, 79, 80, 82, 84
Actually, let's organize properly:
Correct back-to-back format:
Team B | Stem | Team A
Actually, let's do it properly:
Back-to-Back Stem-and-Leaf Plot
Team B (left) | Stem | Team A (right)
(71, 73, 74, 75, 76, 77, 78, 79, 80, 82, 84) | (72, 74, 75, 76, 78, 79, 80, 81, 82, 83)
Correctly organized:
Back-to-Back Stem-and-Leaf Plot
Team B (left) | Stem | Team A (right)
Team A: Mean = (72+74+75+76+78+79+80+81+82+83)/10 = 78 inches
Team B: Mean = (71+73+74+75+76+77+78+79+80+82+84)/11 = 77.18 inches
Team A has higher mean (78 vs 77.18)
Team A has maximum of 83 vs Team B's 84
Both teams have similar spread
Team A has taller players overall with a mean height of 78 inches compared to Team B's 77.18 inches. However, Team B has the tallest individual player (84 inches).
• Back-to-back format: Place one data set's leaves on left, another on right
• Comparison metrics: Compare means, medians, ranges, and distributions
• Visual analysis: Use the plot to identify patterns and differences
Stem: Leading digit(s) of data value
Leaf: Trailing digit of data value
Key: Explanation of how to read the plot
Back-to-back: Two data sets compared using shared stems
- Identify stem digits: Usually the highest place value
- Organize stems: List in ascending order
- Add leaves: Place trailing digits next to corresponding stems
- Order leaves: Arrange from smallest to largest
- Include key: Explain how to read the plot
• Stem selection: Choose appropriate place value for stems
• Leaf ordering: Always arrange leaves in ascending order
• Key requirement: Include a key to interpret the plot
• Spacing: Maintain consistent spacing between elements
• Completeness: Include all data points without omissions
For decimals, the stem is typically the whole number part, and the leaf is the first decimal place (or more depending on precision needed)
Raw data: 62.3, 63.1, 61.8, 64.2, 63.7, 62.9, 65.1, 64.5, 63.3, 62.7, 64.0
Sorted data: 61.8, 62.3, 62.7, 62.9, 63.1, 63.3, 63.7, 64.0, 64.2, 64.5, 65.1
For data like 62.3: Stem = 62, Leaf = 3
This preserves one decimal place precision
Key: 62 | 3 means 62.3 kg
Weight (kg) Stem-and-Leaf Plot
Key: 62 | 3 means 62.3 kg
• Decimal handling: Use appropriate decimal places for leaves
• Precision preservation: Maintain significant figures in the plot
• Key clarity: Specify decimal placement in the key
Stem | Leaf
6 | 2 3 5 7 8 9
7 | 1 2 3 4 4 5 6 7 8 9
8 | 0 1 2 3 5 6 7
9 | 1 2 3
Key: 6 | 2 means 62°F
Describe the distribution shape, find outliers, and calculate quartiles.
Shape: Symmetric, skewed left, skewed right, uniform
Outliers: Values significantly different from others
Quartiles: Q1 (25%), Q2 (50% = median), Q3 (75%)
62, 63, 65, 67, 68, 69, 71, 72, 73, 74, 74, 75, 76, 77, 78, 79, 80, 81, 82, 83, 85, 86, 87, 91, 92, 93
Total: 26 values
Looking at the plot: 6| has 6 values, 7| has 10 values, 8| has 7 values, 9| has 3 values
The distribution is slightly skewed right (more values on the lower end)
Total values: 26
Q1 (25%): Position = (26+1)×0.25 = 6.75 → Between 6th and 7th values
6th value: 69, 7th value: 71 → Q1 = (69+71)/2 = 70
Q2 (50%): Position = (26+1)×0.5 = 13.5 → Between 13th and 14th values
13th value: 76, 14th value: 77 → Q2 = (76+77)/2 = 76.5
Q3 (75%): Position = (26+1)×0.75 = 20.25 → Between 20th and 21st values
20th value: 83, 21st value: 85 → Q3 = (83+85)/2 = 84
IQR = Q3 - Q1 = 84 - 70 = 14
Lower bound = Q1 - 1.5×IQR = 70 - 1.5×14 = 49
Upper bound = Q3 + 1.5×IQR = 84 + 1.5×14 = 105
All values (62-93) are within bounds, so no outliers
Shape: Slightly right-skewed
Center: Median = 76.5°F
Spread: Range = 31°F, IQR = 14°F
Outliers: None
Distribution Shape: Slightly right-skewed (more values on lower end)
Quartiles: Q1 = 70°F, Q2 = 76.5°F, Q3 = 84°F
Outliers: None (all values between 49°F and 105°F)
Summary: Temperatures range from 62°F to 93°F with a median of 76.5°F.
• Quartile calculation: Use position formulas for accurate determination
• Outlier detection: Apply 1.5×IQR rule with upper/lower bounds
• Shape identification: Compare frequency across stems
Stem: The leading digit(s) of a data value that forms the vertical axis of the plot
Leaf: The trailing digit(s) of a data value that appear horizontally next to its stem
Key: An explanation showing how to read the stem-and-leaf notation
Back-to-back plot: Two stem-and-leaf plots sharing a common stem column to compare datasets
- Data organization: Sort data values in ascending order
- Stem selection: Determine appropriate place value for stems (usually highest place value)
- Plot construction: List stems vertically, add corresponding leaves horizontally
- Leaf ordering: Arrange leaves in ascending order within each stem
- Key creation: Provide clear explanation of how to read the plot
- Analysis: Interpret the distribution, find statistical measures
• Stem determination: For n-digit number, stem typically uses first n-1 digits
• Quartile positions: Q1 at (n+1)×0.25, Q2 at (n+1)×0.5, Q3 at (n+1)×0.75
• Outlier boundaries: Lower = Q1 - 1.5×IQR, Upper = Q3 + 1.5×IQR
• IQR calculation: Interquartile range = Q3 - Q1
• Data preservation: Each leaf represents exactly one data point
Questions & Answers
Question: I'm confused about when to split or combine stems in a stem-and-leaf plot. How do I decide the best approach for organizing my data?
Answer: Great question! The decision to split or combine stems depends on the distribution of your data:
- Combine stems when: Individual stems have very few leaves (0-1), creating a sparse appearance
- Split stems when: A stem has too many leaves (more than 10-12), making the plot hard to read
Example of combining: If you have stems 6, 7, 8 with only 1-2 leaves each, combine them into 6-8 | followed by all leaves.
Example of splitting: If stem 7 has many leaves (7|0123456789), you might split it into:
7(0-4)|01234 and 7(5-9)|56789
The goal is to create a plot that's neither too sparse nor too dense, typically with 5-20 stems for optimal readability.
Question: How do stem-and-leaf plots differ from histograms, and when should I use each one?
Answer: Both visualize data distribution, but they serve different purposes:
- Stem-and-leaf plots: Preserve original data values, ideal for small to medium datasets (15-50 values), excellent for identifying specific values and patterns
- Histograms: Show frequency distribution in bins, better for large datasets, easier to see overall shape
Use stem-and-leaf when: You need to see exact values, have fewer than 50 data points, want to identify outliers easily.
Use histograms when: You have large datasets, want to focus on distribution shape, don't need exact values.
Stem-and-leaf plots are also called "stem plots" and provide more detail than histograms since no data is lost in the visualization.
Question: How can I quickly identify the shape of a distribution from a stem-and-leaf plot? What patterns should I look for?
Answer: Distribution shape is visible through the pattern of leaves across stems:
- Symmetric: Leaves are roughly balanced on both sides of the middle stem(s)
- Right-skewed: More leaves on lower stems, tail extends toward higher values
- Left-skewed: More leaves on higher stems, tail extends toward lower values
- Uniform: Roughly equal number of leaves on each stem
- Bimodal: Two distinct peaks in the number of leaves
Quick identification: Count the number of leaves per stem and imagine a curve connecting the midpoints. The direction of the longer tail indicates skewness.
Look for gaps (missing values) and clusters (concentrated values) as well, as these reveal important characteristics about your data.