Sampling Distribution: The distribution of a statistic (like sample mean) from repeated samples of the same size
Sample Mean: Average of values in a sample
Standard Error: Standard deviation of the sampling distribution
- Identify the population parameters (μ, σ)
- Apply the sampling distribution formulas
- Calculate the mean and standard error of sample means
Population mean (μ) = 70 inches
Population standard deviation (σ) = 3 inches
Sample size (n) = 25
Mean of sample means (μₓ̄) = Population mean (μ) = 70 inches
Standard error (σₓ̄) = σ ÷ √n = 3 ÷ √25 = 3 ÷ 5 = 0.6 inches
Standard error = 0.6 inches
Sample size = 25
The sampling distribution of sample means has a mean of 70 inches and a standard deviation (standard error) of 0.6 inches. The mean remains the same as the population mean, but the standard deviation decreases by a factor of √n, making sample means less variable than individual observations.
• Sampling distribution mean: μₓ̄ = μ
• Standard error: σₓ̄ = σ ÷ √n
• Decreased variability: Sample means are less spread out than individual values
Central Limit Theorem: As sample size increases, the sampling distribution of sample means approaches normality
Individual vs. Sample Mean: Different standard deviations affect probabilities
- Calculate probability for individual observation
- Calculate probability for sample mean using sampling distribution
- Compare the results
For individual: z = (110 - 120) ÷ 15 = -10 ÷ 15 = -0.67
P(X < 110) ≈ 25% (from standard normal table)
For sample mean: σₓ̄ = 15 ÷ √36 = 15 ÷ 6 = 2.5
z = (110 - 120) ÷ 2.5 = -10 ÷ 2.5 = -4.0
P(Individual < 110) ≈ 25%
P(Sample mean < 110) ≈ 0% (z = -4.0 is extremely unlikely)
Sample mean: P(X̄ < 110) ≈ 0%
Sample size = 36
For an individual student, there's approximately a 25% chance of completing the test in less than 110 minutes. However, for the mean time of 36 students, the probability is essentially 0%. This demonstrates the power of the Central Limit Theorem - sample means are much less variable than individual observations.
• CLT: Sample means have reduced variability
• Standard error: σₓ̄ = σ ÷ √n
• Reduced probability: Extreme values are less likely for sample means
Confidence Interval: Range of values likely to contain the true parameter
Sampling Variability: How sample statistics vary from sample to sample
- Calculate the standard error of the sample mean
- Convert interval endpoints to z-scores for the sampling distribution
- Find the probability between these z-scores
σₓ̄ = σ ÷ √n = 0.1 ÷ √16 = 0.1 ÷ 4 = 0.025 lb
For 0.95: z₁ = (0.95 - 1.0) ÷ 0.025 = -0.05 ÷ 0.025 = -2.0
For 1.05: z₂ = (1.05 - 1.0) ÷ 0.025 = 0.05 ÷ 0.025 = 2.0
P(-2.0 < Z < 2.0) = P(Z < 2.0) - P(Z < -2.0)
= 0.9772 - 0.0228 = 0.9544 = 95.44%
Z-scores: -2.0 to 2.0
Probability = 95.44%
Approximately 95.44% of samples of size 16 will have sample means between 0.95 and 1.05 lb. This interval corresponds to 2 standard errors on either side of the population mean, which captures approximately 95% of sample means according to the empirical rule.
• Standard error: σₓ̄ = σ ÷ √n
• Sampling distribution: X̄ ~ N(μ, σₓ̄)
• Empirical rule: 95% within 2 standard errors
Binomial Distribution: Distribution of number of successes in n independent trials
Normal Approximation: Using normal distribution to approximate binomial when n is large
Continuity Correction: Adjusting discrete values for continuous approximation
- Verify conditions for normal approximation (np ≥ 5, n(1-p) ≥ 5)
- Calculate mean and standard deviation of binomial distribution
- Apply continuity correction
- Standardize and calculate probability
n = 100, p = 0.5
np = 100 × 0.5 = 50 ≥ 5 ✓
n(1-p) = 100 × 0.5 = 50 ≥ 5 ✓
Mean: μ = np = 100 × 0.5 = 50
Standard deviation: σ = √[np(1-p)] = √[100 × 0.5 × 0.5] = √25 = 5
P(45 ≤ X ≤ 55) becomes P(44.5 < X < 55.5)
z₁ = (44.5 - 50) ÷ 5 = -1.1
z₂ = (55.5 - 50) ÷ 5 = 1.1
P(-1.1 < Z < 1.1) ≈ 72.87%
Z-scores: -1.1 to 1.1
Probability ≈ 72.87%
The probability of getting between 45 and 55 heads in 100 flips is approximately 72.87%. The normal approximation is valid here since both np and n(1-p) are greater than 5, and the continuity correction helps bridge the gap between discrete binomial and continuous normal distributions.
• Conditions: np ≥ 5 and n(1-p) ≥ 5
• Binomial parameters: μ = np, σ = √[np(1-p)]
• Continuity correction: Adjust discrete bounds by 0.5
Percentile: Value below which a given percentage of observations fall
90th Percentile: Value below which 90% of data falls
Critical Value: Z-score corresponding to a specific probability
- Identify the desired percentile (90th percentile)
- Find the corresponding z-score from standard normal table
- Convert z-score back to original units using x = μ + zσ
90th percentile means 90% of values fall below this point
From standard normal table, z₀.₉₀ ≈ 1.28
x = μ + zσ = 800 + (1.28)(50) = 800 + 64 = 864 hours
90th percentile = 864 hours
Top 10% cutoff = 864 hours
The 90th percentile corresponds to a lifetime of 864 hours. This means that 90% of light bulbs last less than 864 hours, and only 10% last longer than this value. The top 10% of bulbs have lifetimes exceeding 864 hours.
• Percentile identification: 90th percentile = top 10%
• Z-score lookup: Use standard normal table
• Conversion formula: x = μ + zσ
Sampling Distribution: X̄ ~ N(μ, σ/√n)
Standard Error: SE = σ/√n
Normal Approximation: μ = np, σ = √[np(1-p)]
Sampling Distribution: The distribution of a statistic (like sample mean) computed from all possible samples of the same size from a population. The sampling distribution of the sample mean is normally distributed if the population is normal or if the sample size is large.
Central Limit Theorem (CLT): States that the sampling distribution of the sample mean approaches a normal distribution as the sample size increases, regardless of the population distribution, provided n ≥ 30.
Standard Error: The standard deviation of a sampling distribution, measuring the variability of the statistic across samples. SE = σ/√n for sample means.
- Sampling Distribution Analysis: Calculate μₓ̄ = μ and σₓ̄ = σ/√n
- CLT Applications: Use when working with sample means and n ≥ 30
- Normal Approximation: Apply to binomial when np ≥ 5 and n(1-p) ≥ 5
- Percentile Calculations: Find z-scores and convert back to original units
• Sampling distribution: μₓ̄ = μ, σₓ̄ = σ/√n
• CLT condition: n ≥ 30 for most distributions
• Normal approximation: np ≥ 5 and n(1-p) ≥ 5
• Continuity correction: Adjust discrete values by ±0.5