Signs of Trigonometric Functions in Each Quadrant

Complete guide to understanding which trigonometric functions are positive or negative in each quadrant of the coordinate plane.

Signs of Trigonometric Functions by Quadrant
1 Quadrant I (0° to 90°)
Quadrant I
All trigonometric functions are positive in Quadrant I.
Range: 0° < θ < 90° (or 0 < θ < π/2 radians)
Coordinates: (x > 0, y > 0), r > 0
Definition:

Quadrant I: The upper-right section of the coordinate plane where both x and y coordinates are positive. Since r (the radius/distance from origin) is always positive, all trigonometric ratios are positive here.

Understanding the signs:
  1. In Quadrant I: x > 0, y > 0, r > 0
  2. sin θ = y/r → positive/positive = positive
  3. cos θ = x/r → positive/positive = positive
  4. tan θ = y/x → positive/positive = positive
Function
Sign
sin θ
+
cos θ
+
tan θ
+
Step 1: Identify the quadrant

Quadrant I is where both x and y coordinates are positive. Any angle between 0° and 90° falls in this quadrant.

Step 2: Determine the signs of coordinates

For any point (x, y) in Quadrant I: x > 0 and y > 0. The radius r = √(x² + y²) is always positive.

Step 3: Apply trigonometric definitions

sin θ = y/r, cos θ = x/r, tan θ = y/x

Since all values (x, y, r) are positive, all ratios are positive.

Step 4: Remember the mnemonic

"All Students Take Calculus" - All functions are positive in Quadrant I

sin θ > 0, cos θ > 0, tan θ > 0 in Quadrant I
Final answer:

In Quadrant I, all six trigonometric functions (sin, cos, tan, csc, sec, cot) are positive.

Applied rules:

• Coordinate signs: Both x and y are positive in Quadrant I

• Radius positivity: r = √(x² + y²) is always positive

• Ratio positivity: Positive divided by positive yields positive

2 Quadrant II (90° to 180°)
Quadrant II
Only sine and cosecant are positive in Quadrant II.
Range: 90° < θ < 180° (or π/2 < θ < π radians)
Coordinates: (x < 0, y > 0), r > 0
Definition:

Quadrant II: The upper-left section of the coordinate plane where x is negative and y is positive. Only sine and its reciprocal cosecant remain positive.

Function
Sign
sin θ
+
cos θ
-
tan θ
-
Step 1: Identify the quadrant

Quadrant II is where x coordinates are negative and y coordinates are positive. Any angle between 90° and 180° falls in this quadrant.

Step 2: Determine the signs of coordinates

For any point (x, y) in Quadrant II: x < 0 and y > 0. The radius r = √(x² + y²) is always positive.

Step 3: Apply trigonometric definitions

sin θ = y/r → positive/positive = positive

cos θ = x/r → negative/positive = negative

tan θ = y/x → positive/negative = negative

Step 4: Remember the mnemonic

"All Students Take Calculus" - Only Sine is positive in Quadrant II ("S" for Sine)

sin θ > 0, cos θ < 0, tan θ < 0 in Quadrant II
Final answer:

In Quadrant II, only sine and cosecant are positive. Cosine, secant, tangent, and cotangent are negative.

Applied rules:

• Coordinate signs: x is negative, y is positive in Quadrant II

• Ratio signs: Positive divided by positive is positive, negative divided by positive is negative

• Reciprocal preservation: Function and its reciprocal have the same sign

3 Quadrant III (180° to 270°)
Quadrant III
Only tangent and cotangent are positive in Quadrant III.
Range: 180° < θ < 270° (or π < θ < 3π/2 radians)
Coordinates: (x < 0, y < 0), r > 0
Definition:

Quadrant III: The lower-left section of the coordinate plane where both x and y coordinates are negative. Only tangent and its reciprocal cotangent are positive.

Function
Sign
sin θ
-
cos θ
-
tan θ
+
Step 1: Identify the quadrant

Quadrant III is where both x and y coordinates are negative. Any angle between 180° and 270° falls in this quadrant.

Step 2: Determine the signs of coordinates

For any point (x, y) in Quadrant III: x < 0 and y < 0. The radius r = √(x² + y²) is always positive.

Step 3: Apply trigonometric definitions

sin θ = y/r → negative/positive = negative

cos θ = x/r → negative/positive = negative

tan θ = y/x → negative/negative = positive

Step 4: Remember the mnemonic

"All Students Take Calculus" - Only Tangent is positive in Quadrant III ("T" for Tangent)

sin θ < 0, cos θ < 0, tan θ > 0 in Quadrant III
Final answer:

In Quadrant III, only tangent and cotangent are positive. Sine, cosine, secant, and cosecant are negative.

Applied rules:

• Coordinate signs: Both x and y are negative in Quadrant III

• Ratio signs: Negative divided by positive is negative, negative divided by negative is positive

• Tangent definition: Ratio of two negatives results in positive

Complete Trigonometric Function Sign Summary
\(\sin \theta = \frac{y}{r}, \cos \theta = \frac{x}{r}, \tan \theta = \frac{y}{x}\)
Basic Trigonometric Ratios
Quadrant I
All Positive
All functions: sin, cos, tan, csc, sec, cot
Quadrant II
Sin Positive
Only sin and csc positive
Quadrant III
Tan Positive
Only tan and cot positive
Quadrant IV
Cos Positive
Only cos and sec positive
Key definitions:

Trigonometric Functions: Functions that relate angles to ratios of sides in a right triangle or coordinates on the unit circle

Unit Circle: Circle with radius 1 centered at the origin, used to define trigonometric functions for any angle

Reference Angle: The acute angle formed between the terminal side of the given angle and the x-axis

ASTC Rule: Mnemonic "All Students Take Calculus" to remember which functions are positive in each quadrant

Determining function signs:
  1. Identify the quadrant: Determine which quadrant the angle θ lies in
  2. Check coordinate signs: Determine if x and y coordinates are positive or negative
  3. Apply ratio rules: Use the definitions sin θ = y/r, cos θ = x/r, tan θ = y/x
  4. Remember reciprocals: Functions and their reciprocals have the same sign
  5. Use ASTC: Apply the "All Students Take Calculus" mnemonic
Tip 1: The ASTC mnemonic helps remember which functions are positive: All (I), Sine (II), Tangent (III), Cosine (IV).
Tip 2: Remember that r (radius) is always positive since it represents distance from origin.
Tip 3: Reciprocal functions (csc, sec, cot) have the same signs as their corresponding primary functions.
Tip 4: A negative divided by a negative is positive (important for tangent in Quadrant III).
Common errors: Forgetting that r is always positive, confusing which functions are positive in which quadrants, misapplying the ASTC rule.
Memory aid: "All Students Take Calculus" → Quadrant I: All, II: Sine, III: Tangent, IV: Cosine.
Essential rules to know:

• Quadrant I: All trigonometric functions are positive

• Quadrant II: Only sine and cosecant are positive

• Quadrant III: Only tangent and cotangent are positive

• Quadrant IV: Only cosine and secant are positive

• Reciprocal rule: Function and reciprocal have the same sign

Quadrant IV and Practical Examples
4 Quadrant IV (270° to 360°)
Quadrant IV
Only cosine and secant are positive in Quadrant IV.
Range: 270° < θ < 360° (or 3π/2 < θ < 2π radians)
Coordinates: (x > 0, y < 0), r > 0
Definition:

Quadrant IV: The lower-right section of the coordinate plane where x is positive and y is negative. Only cosine and its reciprocal secant are positive.

Function
Sign
sin θ
-
cos θ
+
tan θ
-
Step 1: Identify the quadrant

Quadrant IV is where x coordinates are positive and y coordinates are negative. Any angle between 270° and 360° falls in this quadrant.

Step 2: Determine the signs of coordinates

For any point (x, y) in Quadrant IV: x > 0 and y < 0. The radius r = √(x² + y²) is always positive.

Step 3: Apply trigonometric definitions

sin θ = y/r → negative/positive = negative

cos θ = x/r → positive/positive = positive

tan θ = y/x → negative/positive = negative

Step 4: Remember the mnemonic

"All Students Take Calculus" - Only Cosine is positive in Quadrant IV ("C" for Cosine)

sin θ < 0, cos θ > 0, tan θ < 0 in Quadrant IV
Final answer:

In Quadrant IV, only cosine and secant are positive. Sine, cosecant, tangent, and cotangent are negative.

Applied rules:

• Coordinate signs: x is positive, y is negative in Quadrant IV

• Ratio signs: Positive divided by positive is positive, negative divided by positive is negative

• Reciprocal preservation: Function and its reciprocal have the same sign

5 Practical Example
Example Problem
Determine the signs of sin(210°), cos(210°), and tan(210°).
Angle Location: 210° is in Quadrant III
Definition:

Reference Angle: The acute angle that the terminal side of the given angle makes with the x-axis. For 210°, the reference angle is 210° - 180° = 30°.

Angle
210°
Quadrant
III
Signs
sin(-), cos(-), tan(+)
Step 1: Locate the angle

210° is between 180° and 270°, so it's in Quadrant III.

Step 2: Apply the quadrant rule

In Quadrant III, only tangent and cotangent are positive. Sine, cosine, secant, and cosecant are negative.

Step 3: Determine the signs

sin(210°) = negative (since sine is negative in Quadrant III)

cos(210°) = negative (since cosine is negative in Quadrant III)

tan(210°) = positive (since tangent is positive in Quadrant III)

Step 4: Verify with exact values

sin(210°) = sin(180° + 30°) = -sin(30°) = -1/2

cos(210°) = cos(180° + 30°) = -cos(30°) = -√3/2

tan(210°) = tan(180° + 30°) = tan(30°) = 1/√3

sin(210°) < 0, cos(210°) < 0, tan(210°) > 0
Final answer:

sin(210°) = -1/2 (negative), cos(210°) = -√3/2 (negative), tan(210°) = 1/√3 (positive)

Applied rules:

• Quadrant identification: 180° < 210° < 270° means Quadrant III

• Function signs: In Quadrant III, only tangent is positive

• Reference angles: Using reference angle to find exact values

Detailed Summary: Signs of Trig Functions in Each Quadrant
\(\sin \theta = \frac{y}{r}, \cos \theta = \frac{x}{r}, \tan \theta = \frac{y}{x}\)
Fundamental Trigonometric Definitions
Comprehensive definitions:

Trigonometric Functions: Mathematical functions that relate angles to ratios of sides in a right triangle or coordinates on the unit circle. The six primary functions are sine (sin), cosine (cos), tangent (tan), cosecant (csc), secant (sec), and cotangent (cot).

Coordinate Plane Quadrants: The coordinate plane is divided into four quadrants by the x and y axes. Each quadrant has specific sign conventions for x and y coordinates.

Unit Circle: A circle with radius 1 centered at the origin of the coordinate plane. It provides a geometric interpretation of trigonometric functions for any angle.

ASTC Rule: A mnemonic device standing for "All Students Take Calculus" to remember which trigonometric functions are positive in each quadrant.

Complete methodology for determining signs:
  1. Angle Identification: Determine the quadrant in which the angle θ lies by comparing it to 0°, 90°, 180°, 270°, or 360°.
  2. Coordinate Analysis: Determine the signs of x and y coordinates in that quadrant.
  3. Radius Property: Remember that r = √(x² + y²) is always positive regardless of quadrant.
  4. Ratio Calculation: Apply the fundamental definitions: sin θ = y/r, cos θ = x/r, tan θ = y/x.
  5. Sign Determination: Determine the sign of each ratio based on the signs of the numerator and denominator.
  6. Reciprocal Rule: Remember that reciprocal functions have the same sign as their primary functions (csc has same sign as sin, sec has same sign as cos, cot has same sign as tan).
  7. Mnemonic Verification: Use the ASTC rule as a verification tool: All (I), Sine (II), Tangent (III), Cosine (IV).
Tip 1: Remember that r is always positive since it represents distance from the origin, which is always non-negative.
Tip 2: The ASTC mnemonic is invaluable: All functions positive in QI, Sine in QII, Tangent in QIII, Cosine in QIV.
Tip 3: Reciprocal functions always have the same sign as their corresponding primary functions (sin/csc, cos/sec, tan/cot).
Tip 4: When working with negative angles, convert to positive equivalent by adding 360° or 2π to determine the quadrant.
Common errors: Misidentifying the quadrant, forgetting that r is always positive, confusing signs when applying ratio rules, misremembering the ASTC rule, incorrectly determining signs of reciprocal functions.
Applications: Solving trigonometric equations, evaluating inverse trigonometric functions, analyzing periodic phenomena, navigation, physics, engineering, computer graphics, and signal processing.
Essential rules and properties to memorize:

• Quadrant I (0° to 90°): All trigonometric functions are positive (All Students Take Calculus - "All")

• Quadrant II (90° to 180°): Only sine and cosecant are positive (All Students Take Calculus - "Students")

• Quadrant III (180° to 270°): Only tangent and cotangent are positive (All Students Take Calculus - "Take")

• Quadrant IV (270° to 360°): Only cosine and secant are positive (All Students Take Calculus - "Calculus")

• Reciprocal property: Primary functions and their reciprocals share the same sign

Visualization: Trigonometric Function Signs
Quadrant Sign Analysis
Comprehensive visualization of trigonometric function signs across all four quadrants

Analysis: The chart visualizes how trigonometric function signs change across quadrants, reinforcing the ASTC rule and providing a visual reference for quick recall.

Quadrant sin/csc cos/sec tan/cot Mnemonic
I (0°-90°) Positive Positive Positive All
II (90°-180°) Positive Negative Negative Sine
III (180°-270°) Negative Negative Positive Tangent
IV (270°-360°) Negative Positive Negative Cosine

Questions & Answers

Question: I understand that sine is positive in Quadrants I and II, but why does cosine become negative in Quadrant II? Isn't cosine also a positive ratio?

Answer: Great question! The sign of a trigonometric function depends on the signs of the coordinates involved in its definition. Let's break down cosine specifically:

Definition: cos θ = x/r

In Quadrant II: Points have negative x-coordinates (x < 0) and positive y-coordinates (y > 0). The radius r = √(x² + y²) is always positive.

Therefore: cos θ = x/r = (negative)/(positive) = negative

This happens because cosine represents the x-coordinate of the point on the unit circle, normalized by the radius. In Quadrant II, all x-coordinates are negative, so cosine is negative there.

Remember: The sign of a trigonometric function depends on the signs of the coordinates in its definition, not whether the ratio itself "should" be positive.

Question: How do I handle negative angles when determining trigonometric function signs? For example, what about sin(-45°)?

Answer: Negative angles are measured clockwise from the positive x-axis. Here's how to handle them:

  1. Convert to positive equivalent: Add 360° to find the positive coterminal angle. For -45°: -45° + 360° = 315°
  2. Determine quadrant: 315° is between 270° and 360°, so it's in Quadrant IV
  3. Apply quadrant rule: In Quadrant IV, cosine and secant are positive, sine and tangent are negative

Therefore: sin(-45°) = sin(315°) = negative value

Alternative approach: You can also use the odd/even properties of functions. Sine is an odd function, so sin(-θ) = -sin(θ), which means sin(-45°) = -sin(45°) = -√2/2.

Both approaches yield the same result: sin(-45°) is negative.

Question: I keep forgetting which functions are positive in each quadrant. Is there an easier way to remember the ASTC rule?

Answer: Yes! Here are several memory aids for the ASTC rule:

  • ASTC: "All Students Take Calculus" - Quadrant I: All, II: Students (Sine), III: Take (Tangent), IV: Calculus (Cosine)
  • Physical analogy: Think of moving counterclockwise around the coordinate plane:
    • QI: Happy (All positive)
    • QII: Up but left (Only Sine positive)
    • QIII: Down and left (Only Tangent positive)
    • QIV: Down but right (Only Cosine positive)
  • Pattern recognition: Notice that the first function (Sine) is positive in the first two quadrants, then Cosine takes over in the last two, with Tangent being positive in the middle two.
  • Acronym alternatives: "All Silver Tea Cups" or "Add Sugar To Coffee"

The most effective approach is to understand WHY the signs are what they are based on coordinate signs, but the mnemonics help with quick recall during tests.

Question: How do the signs of reciprocal functions (csc, sec, cot) relate to their primary functions (sin, cos, tan)?

Answer: Reciprocal functions always have the same sign as their corresponding primary functions. Here's why:

Definitions:

  • csc θ = 1/sin θ
  • sec θ = 1/cos θ
  • cot θ = 1/tan θ

Sign analysis:

  • If sin θ is positive, then csc θ = 1/(positive) = positive
  • If cos θ is negative, then sec θ = 1/(negative) = negative
  • If tan θ is positive, then cot θ = 1/(positive) = positive

This relationship holds because dividing 1 by a positive number gives a positive result, and dividing 1 by a negative number gives a negative result.

Practical consequence: When determining the sign of a reciprocal function, you can simply look at the sign of its corresponding primary function in that quadrant.

Question: What happens to trigonometric function signs at the boundary angles like 90°, 180°, 270°, and 360°?

Answer: At boundary angles (also called quadrantal angles), some trigonometric functions equal zero or are undefined:

  • At 0° or 360°: sin(0°) = 0, cos(0°) = 1, tan(0°) = 0
  • At 90°: sin(90°) = 1, cos(90°) = 0, tan(90°) = undefined
  • At 180°: sin(180°) = 0, cos(180°) = -1, tan(180°) = 0
  • At 270°: sin(270°) = -1, cos(270°) = 0, tan(270°) = undefined

These angles lie exactly on the axes, so they're not strictly in any quadrant. The functions that involve division by zero (like tan θ = y/x when x = 0) become undefined at these points.

For practical purposes, when working with these angles, we consider them to be approaching from a particular quadrant, which determines the sign of the function as it approaches the boundary.