Trigonometric Values on the Unit Circle: Understanding Circular Functions

Master trigonometric values on the unit circle: definitions, core principles, methods, and applications through these 5 detailed exercises with visual representations.

Solution: Exercises 1 to 3
1 Basic Unit Circle Values
Exercise 1
Find the exact values of sin θ, cos θ, and tan θ for θ = π/3 radians using the unit circle. State the coordinates of the corresponding point on the unit circle.
Definition:

Unit Circle: A circle with radius 1 centered at the origin. For any angle θ, the point on the unit circle is (cos θ, sin θ).

Method:
  1. Identify the angle: θ = π/3 radians = 60°
  2. Locate the angle on the unit circle
  3. Use the 30-60-90 triangle to find coordinates
  4. Apply: x-coordinate = cos θ, y-coordinate = sin θ
  5. Calculate tan θ = sin θ/cos θ
π/3
(60°)
(1/2, √3/2)
(1,0)
(0,1)
QI
sin(π/3) = √3/2
cos(π/3) = 1/2
tan(π/3) = √3
Step 1: Identify the angle

θ = π/3 radians = 60°

This angle is in the first quadrant

Step 2: Use the 30-60-90 triangle

For 60°: opposite = √3, adjacent = 1, hypotenuse = 2

Normalized to unit circle: opposite = √3/2, adjacent = 1/2

Step 3: Apply unit circle definitions

Point on unit circle: (cos θ, sin θ) = (1/2, √3/2)

So: cos(π/3) = 1/2, sin(π/3) = √3/2

Step 4: Calculate tangent

tan(π/3) = sin(π/3)/cos(π/3) = (√3/2)/(1/2) = √3

Point: (1/2, √3/2)
sin(π/3) = √3/2
cos(π/3) = 1/2
tan(π/3) = √3
Final answer:

The point on the unit circle is (1/2, √3/2)

sin(π/3) = √3/2, cos(π/3) = 1/2, tan(π/3) = √3

Applied rules:

• Unit Circle Definition: (x,y) = (cos θ, sin θ)

• 30-60-90 Triangle: Side ratio 1 : √3 : 2

• Tangent Definition: tan θ = sin θ/cos θ

2 Quadrant II Values
Exercise 2
Find the exact values of sin θ, cos θ, and tan θ for θ = 2π/3 radians using the unit circle. Explain how the signs change in Quadrant II.
Definition:

Quadrant II: The region where x < 0 and y > 0. In this quadrant, cosine is negative and sine is positive.

2π/3
(120°)
(-1/2, √3/2)
(1,0)
(0,1)
QII
sin(2π/3) = √3/2
cos(2π/3) = -1/2
tan(2π/3) = -√3
Step 1: Identify the angle and quadrant

θ = 2π/3 radians = 120°

This angle is in Quadrant II (90° < θ < 180°)

Step 2: Find the reference angle

Reference angle = π - 2π/3 = 3π/3 - 2π/3 = π/3

Reference angle is π/3 (60°)

Step 3: Use reference angle values

sin(π/3) = √3/2, cos(π/3) = 1/2

Step 4: Apply signs for Quadrant II

In QII: x < 0 (cos is negative), y > 0 (sin is positive)

So: sin(2π/3) = √3/2, cos(2π/3) = -1/2

Step 5: Calculate tangent

tan(2π/3) = sin(2π/3)/cos(2π/3) = (√3/2)/(-1/2) = -√3

Point: (-1/2, √3/2)
sin(2π/3) = √3/2
cos(2π/3) = -1/2
tan(2π/3) = -√3
Final answer:

The point on the unit circle is (-1/2, √3/2)

sin(2π/3) = √3/2, cos(2π/3) = -1/2, tan(2π/3) = -√3

Applied rules:

• Reference Angle: π - θ for angles in QII

• ASTC Rule: Only Sine positive in QII

• Sign Analysis: Determine based on quadrant location

3 Quadrant III Values
Exercise 3
Find the exact values of sin θ, cos θ, and tan θ for θ = 4π/3 radians using the unit circle. Explain how the signs change in Quadrant III.
Definition:

Quadrant III: The region where x < 0 and y < 0. In this quadrant, both cosine and sine are negative.

4π/3
(240°)
(-1/2, -√3/2)
(1,0)
(0,1)
QIII
Step 1: Identify the angle and quadrant

θ = 4π/3 radians = 240°

This angle is in Quadrant III (180° < θ < 270°)

Step 2: Find the reference angle

Reference angle = 4π/3 - π = 4π/3 - 3π/3 = π/3

Reference angle is π/3 (60°)

Step 3: Use reference angle values

sin(π/3) = √3/2, cos(π/3) = 1/2

Step 4: Apply signs for Quadrant III

In QIII: x < 0 (cos is negative), y < 0 (sin is negative)

So: sin(4π/3) = -√3/2, cos(4π/3) = -1/2

Step 5: Calculate tangent

tan(4π/3) = sin(4π/3)/cos(4π/3) = (-√3/2)/(-1/2) = √3

Step 6: Verify using Pythagorean identity

sin²(4π/3) + cos²(4π/3) = (-√3/2)² + (-1/2)² = 3/4 + 1/4 = 1 ✓

Point: (-1/2, -√3/2)
sin(4π/3) = -√3/2
cos(4π/3) = -1/2
tan(4π/3) = √3
Final answer:

The point on the unit circle is (-1/2, -√3/2)

sin(4π/3) = -√3/2, cos(4π/3) = -1/2, tan(4π/3) = √3

Applied rules:

• Reference Angle: θ - π for angles in QIII

• ASTC Rule: Only Tangent positive in QIII

• Pythagorean Identity: sin²θ + cos²θ = 1

Unit Circle: Core Concepts
x² + y² = 1
Unit Circle Equation
(cos θ, sin θ)
Point on Unit Circle
ASTC
All, Sin, Tan, Cos
Functions positive by quadrant
Reference
Acute angle from x-axis
Used for quadrant values
Coterminal
θ + 2πn
n is any integer
Key definitions:

Unit Circle: A circle with radius 1 centered at the origin of the coordinate plane.

Reference Angle: The acute angle formed between the terminal side of the given angle and the x-axis.

ASTC Rule: All functions positive in QI, Sine in QII, Tangent in QIII, Cosine in QIV.

Coterminal Angles: Angles that share the same terminal side, differing by multiples of 2π.

Unit Circle Method:
  1. Determine Quadrant: Identify which quadrant contains the angle
  2. Find Reference Angle: Calculate the acute angle from x-axis
  3. Get Values: Use special angle values
  4. Apply Signs: Use ASTC rule to assign correct signs
  5. Verify: Check that cos²θ + sin²θ = 1
Tip 1: Remember that cos θ = x-coordinate and sin θ = y-coordinate on unit circle.
Tip 2: The unit circle repeats every 2π radians, so θ and θ + 2π represent the same point.
Tip 3: Know the key angles: 0°, 30°, 45°, 60°, 90° and their equivalents in radians.
Memory Aid: For special angles, remember the pattern: 0°, π/6, π/4, π/3, π/2.
Common Mistake: Forgetting to apply the correct signs based on quadrant.
Essential Properties:

• Unit Circle: x² + y² = 1

• Point Coordinates: (cos θ, sin θ)

• Pythagorean Identity: cos²θ + sin²θ = 1

• Periodicity: Functions repeat every 2π radians

Solution: Exercises 4 to 5
4 Real-World Application
Exercise 4
A Ferris wheel rotates at a constant rate, completing one full rotation every 6 minutes. If you start at the bottom of the wheel, find your vertical position (height) after 2 minutes using the unit circle. Assume the center of the wheel is 30 feet above ground and the radius is 25 feet.
Definition:

Parametric Modeling: Using unit circle concepts to model periodic phenomena like circular motion.

2π/3
(120°)
(-1/2, √3/2)
(1,0)
(0,1)
Step 1: Determine angular position after 2 minutes

Full rotation = 2π radians in 6 minutes

Angular velocity = 2π/6 = π/3 radians per minute

After 2 minutes: (π/3) × 2 = 2π/3 radians

Step 2: Find the vertical component

Vertical position on unit circle = sin(2π/3) = √3/2

Step 3: Scale to actual dimensions

Actual vertical displacement = radius × sin(2π/3) = 25 × √3/2 = 25√3/2 feet

Step 4: Calculate height above ground

Starting position: bottom of wheel, so initially 30 - 25 = 5 feet above ground

Height after 2 minutes = center height + vertical displacement

Height = 30 + 25√3/2 ≈ 30 + 21.65 = 51.65 feet

Step 5: Verify the angle makes sense

Starting at bottom (270°), after 2 minutes we've rotated 120° counterclockwise

New position: 270° + 120° = 390° = 30° (equivalent to 2π/3 radians)

Height after 2 minutes ≈ 51.65 feet
Final answer:

After 2 minutes, you are approximately 51.65 feet above the ground.

This makes sense as you're in the upper half of the wheel, moving upward from the bottom.

Applied rules:

• Angular Velocity: θ = ωt

• Unit Circle Scaling: Actual coordinates = radius × (cos θ, sin θ)

• Coordinate Transformation: Account for center offset

5 Trigonometric Identities
Exercise 5
Using the unit circle, prove that sin²θ + cos²θ = 1 for any angle θ, and demonstrate this identity for θ = 5π/4.
Definition:

Pythagorean Identity: The fundamental trigonometric identity derived from the unit circle equation.

5π/4
(225°)
(-√2/2, -√2/2)
(1,0)
(0,1)
Step 1: Prove the identity using unit circle

Any point (x,y) on unit circle satisfies x² + y² = 1

Since (x,y) = (cos θ, sin θ), we have cos²θ + sin²θ = 1

Step 2: Find values for θ = 5π/4

5π/4 is in Quadrant III (reference angle = 5π/4 - π = π/4)

In QIII: cos(5π/4) = -cos(π/4) = -√2/2

In QIII: sin(5π/4) = -sin(π/4) = -√2/2

Step 3: Verify the identity for θ = 5π/4

sin²(5π/4) + cos²(5π/4) = (-√2/2)² + (-√2/2)²

= 2/4 + 2/4 = 4/4 = 1 ✓

Step 4: General proof

For ANY angle θ, the point (cos θ, sin θ) lies on unit circle

Therefore, (cos θ)² + (sin θ)² = 1

So sin²θ + cos²θ = 1 for all θ

sin²θ + cos²θ = 1 (proved)
Verification for 5π/4: (-√2/2)² + (-√2/2)² = 1 ✓
Final answer:

The identity sin²θ + cos²θ = 1 is proven using the unit circle equation x² + y² = 1.

For θ = 5π/4: sin²(5π/4) + cos²(5π/4) = (-√2/2)² + (-√2/2)² = 1/2 + 1/2 = 1 ✓

Applied rules:

• Unit Circle Definition: (x,y) = (cos θ, sin θ)

• Circle Equation: x² + y² = 1

• Pythagorean Identity: Fundamental trigonometric identity

Comprehensive Guide: Trigonometric Values on the Unit Circle
x² + y² = 1
Unit Circle Equation
(cos θ, sin θ)
Point on Unit Circle
Key definitions:

Unit Circle: A circle centered at the origin (0,0) with radius 1, defined by the equation x² + y² = 1.

Reference Angle: The acute angle formed between the terminal side of the given angle and the x-axis, always between 0 and π/2.

ASTC Rule: A mnemonic for remembering which trigonometric functions are positive in each quadrant: All (sin, cos, tan) in QI, Sin in QII, Tan in QIII, Cos in QIV.

Coterminal Angles: Angles that share the same terminal side, differing by integer multiples of 2π radians.

Complete methodology:
  1. Determine Quadrant: Identify which of the four quadrants contains the angle
  2. Find Reference Angle: Calculate the acute angle from the x-axis to the terminal side
  3. Recall Special Values: Use known values for special angles (π/6, π/4, π/3, etc.)
  4. Apply Sign Rules: Use ASTC to assign correct signs
  5. State Results: Express as coordinates (cos θ, sin θ)
Tip 1: Remember that cosine corresponds to x-coordinate and sine to y-coordinate on the unit circle.
Tip 2: The unit circle repeats every 2π radians, so θ and θ + 2π represent the same point.
Tip 3: In Quadrant I, both cosine and sine are positive; in Quadrant II, cosine is negative and sine is positive.
Tip 4: Practice sketching the unit circle to visualize the relationships between angles and coordinates.
Common errors: Forgetting to apply correct signs based on the quadrant when finding trigonometric values.
Exam preparation: Memorize the coordinates for multiples of π/6 and π/4 on the unit circle.
Essential Properties:

• Unit Circle: x² + y² = 1

• Point Coordinates: (cos θ, sin θ)

• Pythagorean Identity: sin²θ + cos²θ = 1

• Periodicity: Functions repeat every 2π radians

• ASTC Rule: All positive in QI, Sin in QII, Tan in QIII, Cos in QIV

Questions & Answers

Question: I'm confused about why the x-coordinate represents cosine and the y-coordinate represents sine on the unit circle. Can you explain this connection?

Answer: This connection comes from the definitions of sine and cosine in a right triangle:

  • In a right triangle, cosine = adjacent/hypotenuse
  • In a right triangle, sine = opposite/hypotenuse

Now consider a point P(cos θ, sin θ) on the unit circle:

  • Draw a line from P to the origin O, forming the angle θ with the positive x-axis
  • Drop a perpendicular from P to the x-axis, creating a right triangle
  • The hypotenuse is the radius of the unit circle = 1
  • The horizontal leg (adjacent) has length |x| = |cos θ|
  • The vertical leg (opposite) has length |y| = |sin θ|

Since the hypotenuse is 1: cos θ = adjacent/1 = x-coordinate, and sin θ = opposite/1 = y-coordinate.

This elegant relationship only works because the radius is 1, which is why we call it the "unit" circle!

Question: How do I remember which trigonometric functions are positive in each quadrant? I keep mixing them up.

Answer: There are several memory aids for remembering which functions are positive in each quadrant:

  • ASTC Method:
    • All (sin, cos, tan) positive in Quadrant I
    • Sine positive in Quadrant II
    • Tangent positive in Quadrant III
    • Cosine positive in Quadrant IV
  • CAST Method: Start from QIV and move counterclockwise: Cosine, All, Sine, Tangent
  • Visual Memory: Remember that in QI both x and y are positive (so cos > 0, sin > 0), then track the changes as you move to other quadrants

I recommend practicing with the ASTC acronym and visualizing the unit circle. For example, in Quadrant II, only sine is positive because that's where y-coordinates are positive while x-coordinates (cosine) are negative.

Question: When working with the unit circle, how do I quickly find the reference angle for any given angle?

Answer: The reference angle is the acute angle between the terminal side of your given angle and the x-axis. Here's how to find it in each quadrant:

  • Quadrant I: Reference angle = θ (the angle itself is acute)
  • Quadrant II: Reference angle = π - θ
  • Quadrant III: Reference angle = θ - π
  • Quadrant IV: Reference angle = 2π - θ

For example, if θ = 5π/4:

  • 5π/4 is in Quadrant III since π < 5π/4 < 3π/2
  • Reference angle = 5π/4 - π = 5π/4 - 4π/4 = π/4

Once you have the reference angle, you can use its known trig values and apply the appropriate signs based on the quadrant using the ASTC rule.