Unit Circle Introduction: Understanding Trigonometric Functions

Master the unit circle: definitions, core principles, methods, and applications through these 5 detailed exercises with visual representations.

Solution: Exercises 1 to 3
1 Unit Circle Basics
Exercise 1
Define the unit circle and explain how to find the coordinates of a point on the unit circle for an angle of 30°.
Definition:

Unit Circle: A circle centered at the origin (0,0) with radius 1. For any angle θ, the point (x,y) on the unit circle is (cos θ, sin θ).

Method:
  1. Draw the unit circle with center at origin
  2. Draw the angle θ from positive x-axis
  3. Find intersection point of angle ray with circle
  4. Coordinates are (cos θ, sin θ)
30°
(√3/2, 1/2)
(1,0)
(0,1)
cos(30°) = √3/2
sin(30°) = 1/2
Step 1: Understand the unit circle equation

The unit circle has the equation x² + y² = 1

Any point (x,y) on the circle satisfies this equation

Step 2: Apply trigonometric definitions

For angle θ on unit circle: cos θ = x-coordinate, sin θ = y-coordinate

So point at angle θ is (cos θ, sin θ)

Step 3: Find coordinates for 30°

cos(30°) = √3/2 ≈ 0.866

sin(30°) = 1/2 = 0.5

Point is (√3/2, 1/2)

Step 4: Verify the point is on the circle

(√3/2)² + (1/2)² = 3/4 + 1/4 = 1 ✓

Point for 30° on unit circle: (√3/2, 1/2)
Final answer:

The point on the unit circle for 30° is (√3/2, 1/2)

This means cos(30°) = √3/2 and sin(30°) = 1/2

Applied rules:

• Unit Circle Definition: (x,y) = (cos θ, sin θ)

• Pythagorean Identity: cos²θ + sin²θ = 1

• Trigonometric Values: Exact values for special angles

2 Radians and Degrees
Exercise 2
Convert 135° to radians and find the coordinates of the corresponding point on the unit circle.
Definition:

Radian Measure: The angle subtended by an arc equal in length to the radius. π radians = 180°.

135°
(-√2/2, √2/2)
(1,0)
(0,1)
cos(135°) = -√2/2
sin(135°) = √2/2
135° = 3π/4 rad
Step 1: Convert degrees to radians

To convert from degrees to radians: multiply by π/180°

135° × π/180° = 135π/180 = 3π/4 radians

Step 2: Identify the reference angle

135° is in Quadrant II, reference angle = 180° - 135° = 45°

cos(45°) = √2/2, sin(45°) = √2/2

Step 3: Apply signs for Quadrant II

In Quadrant II: cos is negative, sin is positive

cos(135°) = -√2/2, sin(135°) = √2/2

Step 4: State the coordinates

Point on unit circle for 135° is (-√2/2, √2/2)

135° = 3π/4 radians
Point: (-√2/2, √2/2)
cos(135°) = -√2/2, sin(135°) = √2/2
Final answer:

135° = 3π/4 radians

The point on the unit circle is (-√2/2, √2/2)

cos(135°) = -√2/2 and sin(135°) = √2/2

Applied rules:

• Conversion Formula: θ(radians) = θ(degrees) × π/180°

• Reference Angles: Use acute angle to determine values

• ASTC Rule: All, Sin, Tan, Cos positive in respective quadrants

3 Finding Trigonometric Values
Exercise 3
Using the unit circle, find the exact values of cos(240°) and sin(240°).
Definition:

Quadrant III: In Quadrant III, both cosine and sine are negative.

240°
(-1/2, -√3/2)
(1,0)
(0,1)
cos(240°) = -1/2
sin(240°) = -√3/2
Ref. angle = 60°
Step 1: Determine the quadrant

240° is between 180° and 270°, so it's in Quadrant III

In Quadrant III, both cosine and sine are negative

Step 2: Find the reference angle

Reference angle = 240° - 180° = 60°

We'll use the values for 60° but apply negative signs

Step 3: Recall values for 60°

cos(60°) = 1/2, sin(60°) = √3/2

Step 4: Apply signs for Quadrant III

cos(240°) = -cos(60°) = -1/2

sin(240°) = -sin(60°) = -√3/2

Step 5: Verify using unit circle

Point is (-1/2, -√3/2), which is indeed in Quadrant III

Check: (-1/2)² + (-√3/2)² = 1/4 + 3/4 = 1 ✓

cos(240°) = -1/2
sin(240°) = -√3/2
Final answer:

cos(240°) = -1/2

sin(240°) = -√3/2

Applied rules:

• Reference Angles: Use acute angle to determine values

• ASTC Rule: Cosine and sine are negative in Quadrant III

• Unit Circle Property: x² + y² = 1 for any point (x,y)

Unit Circle: Definitions and Methods
x² + y² = 1
Unit Circle Equation
(cos θ, sin θ)
Point on Unit Circle
Radians
θ(rad) = θ(°) × π/180°
Conversion from degrees to radians
ASTC
All, Sin, Tan, Cos
Positive functions in each quadrant
Key definitions:

Unit Circle: A circle with radius 1 centered at the origin of the coordinate plane.

Radian: A unit of angular measure where the angle subtends an arc equal to the radius.

Reference Angle: The acute angle formed between the terminal side of the given angle and the x-axis.

ASTC Rule: All functions positive in QI, Sin in QII, Tan in QIII, Cos in QIV.

Unit Circle Method:
  1. Determine Quadrant: Identify which quadrant the angle is in
  2. Find Reference Angle: Calculate the acute angle from x-axis
  3. Get Values: Use special angle values
  4. Apply Signs: Use ASTC rule to assign correct signs
  5. Verify: Check that cos²θ + sin²θ = 1
Tip 1: Remember that cos θ = x-coordinate and sin θ = y-coordinate on unit circle.
Tip 2: The unit circle is symmetric, so many angles have related values.
Tip 3: Know the key angles: 0°, 30°, 45°, 60°, 90° and their equivalents in radians.
Memory Aid: For special angles, remember the pattern: 0°, π/6, π/4, π/3, π/2.
Common Mistake: Forgetting to apply the correct signs based on quadrant.
Essential Properties:

• Unit Circle: x² + y² = 1

• Point Coordinates: (cos θ, sin θ)

• Pythagorean Identity: cos²θ + sin²θ = 1

• Periodicity: Functions repeat every 2π radians (360°)

Solution: Exercises 4 to 5
4 Real-World Application
Exercise 4
A Ferris wheel makes one complete rotation every 4 minutes. At t=0, you start at the bottom. Using the unit circle, model your height above the ground after 1 minute. Assume the wheel has a radius of 20 feet and the center is 25 feet above ground.
Definition:

Parametric Modeling: Using unit circle concepts to model periodic phenomena like circular motion.

90°
(0,1)
(1,0)
(0,1)
Step 1: Determine the angle after 1 minute

Full rotation = 360° in 4 minutes

After 1 minute: (1/4) × 360° = 90°

Step 2: Model the situation

Start at bottom: angle = 270° (or -90°)

After 1 minute: 270° + 90° = 360° (or 0°)

Actually, starting at bottom (lowest point), we move counterclockwise

Starting position: 270°, after 1 min: 270° + 90° = 360° = 0°

Step 3: Find coordinates at 0°

At 0°: cos(0°) = 1, sin(0°) = 0

Position on unit circle: (1, 0)

Step 4: Scale to actual dimensions

Actual x-coordinate: 20 × cos(0°) = 20 × 1 = 20 ft

Actual y-coordinate: 20 × sin(0°) = 20 × 0 = 0 ft

Step 5: Calculate height above ground

Center is 25 ft above ground

Height = center height + vertical displacement

Height = 25 + 0 = 25 ft

Height after 1 minute = 25 feet
Final answer:

After 1 minute, you are 25 feet above the ground.

This makes sense because after 1/4 of the rotation, you reach the rightmost point of the wheel, which is at the same height as the center.

Applied rules:

• Angular Velocity: θ = (time elapsed)/(rotation period) × 360°

• Unit Circle Scaling: Actual coordinates = radius × (cos θ, sin θ)

• Coordinate Transformation: Account for center offset

5 Trigonometric Identities
Exercise 5
Using the unit circle, prove that sin²θ + cos²θ = 1 for any angle θ, and demonstrate this identity for θ = 210°.
Definition:

Pythagorean Identity: The fundamental trigonometric identity derived from the unit circle equation.

210°
(-√3/2, -1/2)
(1,0)
(0,1)
Step 1: Prove the identity using unit circle

Any point (x,y) on unit circle satisfies x² + y² = 1

Since (x,y) = (cos θ, sin θ), we have cos²θ + sin²θ = 1

Step 2: Find values for θ = 210°

210° is in Quadrant III (reference angle = 210° - 180° = 30°)

In QIII: cos(210°) = -cos(30°) = -√3/2

In QIII: sin(210°) = -sin(30°) = -1/2

Step 3: Verify the identity for θ = 210°

sin²(210°) + cos²(210°) = (-1/2)² + (-√3/2)²

= 1/4 + 3/4 = 1 ✓

Step 4: General proof

For ANY angle θ, the point (cos θ, sin θ) lies on unit circle

Therefore, (cos θ)² + (sin θ)² = 1

So sin²θ + cos²θ = 1 for all θ

sin²θ + cos²θ = 1 (proved)
Verification for 210°: (-1/2)² + (-√3/2)² = 1 ✓
Final answer:

The identity sin²θ + cos²θ = 1 is proven using the unit circle equation x² + y² = 1.

For θ = 210°: sin²(210°) + cos²(210°) = (-1/2)² + (-√3/2)² = 1/4 + 3/4 = 1 ✓

Applied rules:

• Unit Circle Definition: (x,y) = (cos θ, sin θ)

• Circle Equation: x² + y² = 1

• Pythagorean Identity: Fundamental trigonometric identity

Comprehensive Guide: Unit Circle Introduction
x² + y² = 1
Unit Circle Equation
(cos θ, sin θ)
Point on Unit Circle
Key definitions:

Unit Circle: A circle centered at the origin (0,0) with radius 1, defined by the equation x² + y² = 1.

Radian: A unit of angular measure where the angle subtends an arc equal in length to the radius. π radians = 180°.

Reference Angle: The acute angle formed between the terminal side of the given angle and the x-axis, always between 0° and 90°.

Terminal Side: The ray that rotates from the initial side to form the angle.

Complete methodology:
  1. Determine Quadrant: Identify which of the four quadrants contains the angle
  2. Find Reference Angle: Calculate the acute angle from the x-axis to the terminal side
  3. Recall Special Values: Use known values for special angles (30°, 45°, 60°, etc.)
  4. Apply Sign Rules: Use ASTC (All, Sin, Tan, Cos) to assign correct signs
  5. State Results: Express as coordinates (cos θ, sin θ)
Tip 1: Remember that cosine corresponds to x-coordinate and sine to y-coordinate on the unit circle.
Tip 2: The unit circle repeats every 360° (2π radians), so θ and θ + 360° represent the same point.
Tip 3: In Quadrant I, both cosine and sine are positive; in Quadrant II, cosine is negative and sine is positive.
Tip 4: Practice sketching the unit circle to visualize the relationships between angles and coordinates.
Common errors: Forgetting to apply correct signs based on the quadrant when finding trigonometric values.
Exam preparation: Memorize the coordinates for multiples of 30° and 45° on the unit circle.
Formulas to know by heart:

• Unit Circle: x² + y² = 1

• Point Coordinates: (cos θ, sin θ)

• Conversion: θ(radians) = θ(degrees) × π/180°

• Pythagorean Identity: sin²θ + cos²θ = 1

• ASTC Rule: All positive in QI, Sin in QII, Tan in QIII, Cos in QIV

Questions & Answers

Question: I'm confused about why the x-coordinate represents cosine and the y-coordinate represents sine on the unit circle. Can you explain this connection?

Answer: This connection comes from the definitions of sine and cosine in a right triangle:

  • In a right triangle, cosine = adjacent/hypotenuse
  • In a right triangle, sine = opposite/hypotenuse

Now consider a point P(cos θ, sin θ) on the unit circle:

  • Draw a line from P to the origin O, forming the angle θ with the positive x-axis
  • Drop a perpendicular from P to the x-axis, creating a right triangle
  • The hypotenuse is the radius of the unit circle = 1
  • The horizontal leg (adjacent) has length |x| = |cos θ|
  • The vertical leg (opposite) has length |y| = |sin θ|

Since the hypotenuse is 1: cos θ = adjacent/1 = x-coordinate, and sin θ = opposite/1 = y-coordinate.

This elegant relationship only works because the radius is 1, which is why we call it the "unit" circle!

Question: How do I remember which trigonometric functions are positive in each quadrant? I keep mixing them up.

Answer: There are several memory aids for remembering which functions are positive in each quadrant:

  • ASTC Method:
    • All (sin, cos, tan) positive in Quadrant I
    • Sine positive in Quadrant II
    • Tangent positive in Quadrant III
    • Cosine positive in Quadrant IV
  • CAST Method: Start from QIV and move counterclockwise: Cosine, All, Sine, Tangent
  • Visual Memory: Remember that in QI both x and y are positive (so cos > 0, sin > 0), then track the changes as you move to other quadrants

I recommend practicing with the ASTC acronym and visualizing the unit circle. For example, in Quadrant II, only sine is positive because that's where y-coordinates are positive while x-coordinates (cosine) are negative.

Question: Why do we need radians if we already have degrees? What's the advantage of using radians?

Answer: Radians are more natural and mathematically elegant than degrees for several reasons:

  • Geometric Connection: Radians directly relate the angle to the arc length on a circle. An angle of θ radians subtends an arc of length θ on the unit circle.
  • Calculus Applications: Derivatives and integrals of trigonometric functions have simpler forms in radians. For example: d/dx(sin x) = cos x (only when x is in radians).
  • Series Expansions: Taylor series for sin x, cos x, etc., are cleaner in radians: sin x = x - x³/3! + x⁵/5! - ...
  • Periodicity: Trigonometric functions have periods that are simple multiples of π in radians: sin x and cos x have period 2π.

Think of radians as measuring angles by the actual distance traveled along the circumference of the unit circle, while degrees are an arbitrary division of a full rotation into 360 parts.

Degrees are still useful for everyday measurements, but radians are essential for advanced mathematics and physics.