Unit Circle with Radians: A circle of radius 1 centered at the origin, where angles are measured in radians from the positive x-axis. Any point is (cos θ, sin θ).
- Identify the angle in radians: θ = π/6
- Convert to degrees if helpful: π/6 = 30°
- Use known values for special angles
- Apply (cos θ, sin θ) to get coordinates
On the unit circle, any angle θ in radians corresponds to the point (cos θ, sin θ)
So for θ = π/6, the point is (cos(π/6), sin(π/6))
π/6 radians = 30°
From special right triangles: cos(30°) = √3/2, sin(30°) = 1/2
The point on the unit circle for θ = π/6 is (√3/2, 1/2)
cos(π/6) = √3/2 and sin(π/6) = 1/2
cos(π/6) = √3/2
sin(π/6) = 1/2
The coordinates are (√3/2, 1/2)
cos(π/6) = √3/2 and sin(π/6) = 1/2
• Unit Circle Definition: (x,y) = (cos θ, sin θ)
• Special Angle Values: Memorized values for common radians
• Pythagorean Identity: cos²θ + sin²θ = 1
Reference Angle: The acute angle formed between the terminal side of the given angle and the x-axis, used to determine trigonometric values in different quadrants.
5π/4 radians = 5π/4 × 180°/π = 225°
225° is between 180° and 270°, so it's in Quadrant III
Reference angle = 5π/4 - π = 5π/4 - 4π/4 = π/4
Or in degrees: 225° - 180° = 45°
cos(π/4) = √2/2, sin(π/4) = √2/2
In Quadrant III, both cosine and sine are negative
cos(5π/4) = -√2/2, sin(5π/4) = -√2/2
Point on unit circle: (-√2/2, -√2/2)
cos(5π/4) = -√2/2
sin(5π/4) = -√2/2
The coordinates are (-√2/2, -√2/2)
cos(5π/4) = -√2/2 and sin(5π/4) = -√2/2
• Reference Angle: θ - π for angles in Quadrant III
• ASTC Rule: Both cosine and sine negative in QIII
• Unit Circle: (cos θ, sin θ) for any angle θ
Coterminal Angles: Angles that share the same initial and terminal sides. They differ by integer multiples of 2π radians (or 360°).
Add 2π to the original angle: π/3 + 2π = π/3 + 6π/3 = 7π/3
Subtract 2π from the original angle: π/3 - 2π = π/3 - 6π/3 = -5π/3
cos(π/3) = 1/2, sin(π/3) = √3/2
Point: (1/2, √3/2)
7π/3 = 2π + π/3, so it's equivalent to π/3
cos(7π/3) = cos(π/3) = 1/2, sin(7π/3) = sin(π/3) = √3/2
-5π/3 + 2π = -5π/3 + 6π/3 = π/3, so it's equivalent to π/3
cos(-5π/3) = cos(π/3) = 1/2, sin(-5π/3) = sin(π/3) = √3/2
All correspond to point: (1/2, √3/2)
Positive coterminal: 7π/3
Negative coterminal: -5π/3
All three angles (π/3, 7π/3, -5π/3) correspond to the same point (1/2, √3/2)
• Coterminal Formula: θ + 2πn, where n is any integer
• Periodicity: Trigonometric functions repeat every 2π
• Unit Circle: Coterminal angles have identical coordinates
Unit Circle: A circle with radius 1 centered at the origin of the coordinate plane.
Radian Measure: A unit of angular measure where the angle subtends an arc equal to the radius.
Coterminal Angles: Angles that share the same initial and terminal sides, differing by multiples of 2π.
Reference Angle: The acute angle formed between the terminal side and the x-axis.
- Determine Quadrant: Identify which quadrant contains the angle
- Find Reference Angle: Calculate the acute angle from x-axis
- Get Values: Use special angle values
- Apply Signs: Use ASTC rule to assign correct signs
- Verify: Check that cos²θ + sin²θ = 1
• Unit Circle: x² + y² = 1
• Point Coordinates: (cos θ, sin θ)
• Pythagorean Identity: cos²θ + sin²θ = 1
• Periodicity: Functions repeat every 2π radians
• Coterminal Angles: θ and θ + 2πn have same trig values
Angular Position: The angle in radians that describes the rotational position of an object at a given time.
One full rotation = 2π radians in 8 minutes
Angular velocity = 2π/8 = π/4 radians per minute
Angle = angular velocity × time = (π/4) × 5 = 5π/4 radians
Starting at 3 o'clock position means starting at 0 radians
After 5 minutes: 0 + 5π/4 = 5π/4 radians
5π/4 is in Quadrant III, reference angle = π/4
cos(5π/4) = -cos(π/4) = -√2/2
sin(5π/4) = -sin(π/4) = -√2/2
Your position on the unit circle after 5 minutes is (-√2/2, -√2/2)
Angle: 5π/4 radians
After 5 minutes, your position on the unit circle is (-√2/2, -√2/2)
This corresponds to an angle of 5π/4 radians
• Angular Velocity: ω = Δθ/Δt
• Unit Circle: Position = (cos θ, sin θ)
• Reference Angles: Use for values in different quadrants
Periodic Function: A function that repeats its values at regular intervals. The period is the length of one complete cycle.
On the unit circle, adding 2π to any angle brings you back to the same position because 2π represents a full rotation
cos(π/4) = √2/2, sin(π/4) = √2/2
Point: (√2/2, √2/2)
π/4 + 2π = π/4 + 8π/4 = 9π/4
9π/4 = 2π + π/4, which is equivalent to π/4 (after subtracting 2π)
cos(9π/4) = cos(π/4) = √2/2
sin(9π/4) = sin(π/4) = √2/2
For any angle θ: cos(θ + 2π) = cos(θ) and sin(θ + 2π) = sin(θ)
This proves that cosine and sine have period 2π
sin(π/4) = sin(9π/4) = √2/2
Period: 2π
Cosine and sine functions are periodic with period 2π because adding 2π to any angle results in the same position on the unit circle.
For θ = π/4: cos(π/4 + 2π) = cos(π/4) and sin(π/4 + 2π) = sin(π/4)
• Periodicity: f(x + P) = f(x) for period P
• Unit Circle: Same angle modulo 2π gives same point
• Trigonometric Properties: Period of sin and cos is 2π
Unit Circle: A circle centered at the origin (0,0) with radius 1, defined by the equation x² + y² = 1.
Radian: A unit of angular measure where the angle subtends an arc equal in length to the radius. π radians = 180°.
Reference Angle: The acute angle formed between the terminal side of the given angle and the x-axis, always between 0 and π/2.
Coterminal Angles: Angles that share the same initial and terminal sides, differing by integer multiples of 2π radians.
- Determine Quadrant: Identify which of the four quadrants contains the angle
- Find Reference Angle: Calculate the acute angle from the x-axis to the terminal side
- Recall Special Values: Use known values for special angles (π/6, π/4, π/3, etc.)
- Apply Sign Rules: Use ASTC (All, Sin, Tan, Cos) to assign correct signs
- State Results: Express as coordinates (cos θ, sin θ)
• Unit Circle: x² + y² = 1
• Point Coordinates: (cos θ, sin θ)
• Pythagorean Identity: sin²θ + cos²θ = 1
• Periodicity: sin(θ + 2π) = sin(θ), cos(θ + 2π) = cos(θ)
• Coterminal Angles: θ and θ + 2πn have same trig values
• ASTC Rule: All positive in QI, Sin in QII, Tan in QIII, Cos in QIV